True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The SW encryption is much faster than decicated HW in our platforms.
The HW encryption is limited to the use of CAAM which is used through
blob calls, therefore the cryptodev module is not required.
https://onedigi.atlassian.net/browse/DEL-8371
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit adds a custom config file to handle the KEY_POWER events on systemd.
https://onedigi.atlassian.net/browse/DEL-8207
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This custom config file applies not only the NXP platforms so this commit
renames it.
https://onedigi.atlassian.net/browse/DEL-8207
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
accel-video was being used only for including or not gstreamer in the
different DEY images. But then we had exceptions to include gstreamer for
machines that do not define accel-video, so just follow what the ccmp15
does, and use a generic 'gstreamer' distro feature to add 'dey-gstreamer'
support to the images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
'package-management' allows to install packages in runtime. This feature is not
usually utilize by customers so we are removing this support from all images.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
In order to reduce the final size in the rootfs, this commit removes the
package manager for the core-image-base images.
https://onedigi.atlassian.net/browse/DEL-8335
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For 'wayland' enabled distro features, 'weston' is added as image
feature. This is later used in poky to change the SYSTEMD_DEFAULT_TARGET
to 'graphical.target' which is the correct systemd default target for
graphical images.
This allows to delete the workaround we have in 'weston-init'
recipe to start weston automatically on boot.
Also delete some packages from CORE_IMAGE_EXTRA_INSTALL:
- weston-init and weston-examples are included as part of the 'weston'
image feature.
- gtk+3-demo: removed from the default images, as it is a graphic framework
we are not promoting.
- xterm: removed as weston does already provide a terminal (weston-terminal).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
v4l-utils contains tools to manage the camera.
We have also documented all these commands in our
documentation
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On systems with a single MTD system partition and multiple UBI
volumes, the initramdisk doesn't mount the 'update' partition
because mdev rules only trigger events for MTD partitions.
This commit adds a rule to trigger an event for every /dev/ubi0_x
(every UBI volume on ubi0 device) and call the new automount_ubi.sh
script. The script checks if the volume is called 'update' and if
so, it creates /mnt/update mountpoint and mounts the volume.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8297
(cherry picked from commit df9c622b1bf0a7307c61deda12cf1f67d4f630f0)
(cherry picked from commit 8b8f9560af)
Make the script send the resume actions to the background
so that console returns to the user without having to wait
for the Wi-Fi module to load and the Bluetooth to attach.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8262
The following files were duplicated across platforms but were
identical or almost identical.
Only used on SysVinit (currently only by default on the CC6UL).
- standby
- acpid.map
Only used on SystemD
- standby-actions
Notes:
- The triggering of udev actions are harmless if the interfaces
don't exist.
- The value of KEY_POWER on acpid.map for CC6/CC6Plus was originally
0 instead of 1, but this file is not currently used in systemd.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add a new parameter '-i' to update-firmware to let the user
select a specific image_set of the sw-description file to
use during the swu update.
This allows adding different image_sets on the sw-description
and reduce the number of images to build. It also adds more
future-proof flexibility.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8199
In previous line we are launching the mdev in daemon mode. One of the
first tasks the daemon mode performs is a cold scan, so there is no need
to repeat it afterwards.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On recovery based devices, the swupdate process is executed in the
recovery, so there is no need to have the swupdate daemon running on the
rootfs.
Add a on-target post installation script to disable the swupdate
bootscript on the normal rootfs. This has the side effect of failing in
the recovery initramfs because the initramfs does not have a complete
SysV init system. For that case add a rootfs postprocess function to
delete the postinst script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is a problem when building the SDK because two binaries
have the same name (update-firmware) and makes the compilation
to fail.
Change the name to update-firmware.recovery and create a wrapper
over the update-firmware to check if the system is not dual boot
to call it.
Rework the code to make it more reliable.
Remove the umount of the alternative linux partition, now it is
not needed because only the active linux partition is mounted now.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Now in the file descriptor we have three different names:
platform, primary and secondary.
Also a link from 'platform' to 'single' to keep backward
compatibility.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
As a result of the dualboot support we may end up with two
'update-firmware' commands in the rootfs. To prevent file name clashing,
we may need to install the recovery-utils update-firmware as
update-firmware.recovery, and then the current command mode check would
fail.
Relax the check, by just looking at the first character.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Generated Crank rootfs image for the ConnectCore MP15 is too big to fit in a
dual boot system. This commit removes gstreamer and package-management features.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
If we add the demo to the graphical images (dey-image-qt) the resulting
image does not fit on the rootfs partition for the smallest variant.
https://onedigi.atlassian.net/browse/DEL-8004
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ConnectCore Demo web page will be the new default landing page for all products,
so remove the default landing page that was created for the ccimx6ulsbc platform.
Signed-off-by: David Escalona <david.escalona@digi.com>
Since Yocto 3.4 the package "clutter-1.0" was considered a legacy component,
and moved to meta-gnome.
https://onedigi.atlassian.net/browse/DEL-7981
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds power safe and reboot safe script for the MCA
and substitute default reboot and poweroff busybox commands.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7828
Even though our busybox recipe (v1.34.1) is backported from poky's honister
branch, it has many elements in common with the recipe provided from poky's
hardknott branch (v1.33.1). To simplify our backport, re-use poky's busybox
files when possible, replacing them only when strictly necessary.
While at it, remove the busybox-inittab recipe, since there are barely any
differences between the honister and hardknott versions.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The common license file GPL-2.0 is now called GPL-2.0-only in poky, so we need
to reflect this name change to avoid errors
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a generic package that is currently being used by NXP to load firmware
on the target, so include it in our images as well. Since it only works with
systemd, leave it out of builds that use sysvinit.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This patch was initially needed for a specific version combination of
NetworkManager (>= v1.22) and glib-2.0 (v2.63.3 - v2.64.X), but since the
hardknott branch of poky now provides glib-2.0 v2.66.7, the patch isn't
needed anymore.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This mode is necessary in the recovery initramfs to be able to properly detect
any external storage device that might contain an update package. The
configuration option associated with this mode became explicit after upgrading
busybox to v1.34.1, so enable it in our defconfig.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The nand devices doesn't need to call the mount_cryptrootfs
script.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some recipes were forcibly removing conflicting packages.
This does not allow to add those packages back for users that
want to use meta-digi layer, but a different distro than 'dey'.
With the 'dey' distro override, such removals are only done
if using this distro.
Reported-by: Michael Burr <michael.burr@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7712
Javier Viguera
Isaac Hermida
Arturo Buzarra
Tatiana Leon
Hector Palacios
Francisco Gil
David Escalona
Mike Engel
Gabriel Valcazar