The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Add commented lines as example to configure and run the wlan0 interface in AP
mode using hostapd daemon.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
According to 'grep' manual '\s' is a synonym for [[:space:]] which
matches spaces, TABs, but also newlines, etc. We want to only match
spaces and TABs, so use [[:blank:]] instead.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* set cellular user and password
* stricter replace to not match set values
* only set cellular interface to auto
Internal merge of Github's PR:
https://github.com/digi-embedded/meta-digi/pull/2
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Down the bluetooth interface before entering suspend and up it after resuming
if it is present and up.
https://jira.digi.com/browse/DEL-2806
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Start syslog earlier (from 20 to 02) so it is running and other init scripts
can use it to log into the system like the S03networking script.
https://jira.digi.com/browse/DEL-2812
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This is needed so the encrypted rootfs is properly resized to the
partition size.
https://jira.digi.com/browse/DEL-2765
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
New functionality has been implemented in trustfence-tool application,
so there is no need to call cryptsetup command.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Get filesystem type of rootfs block device and pass it explicitly to the
mount command to clean following warnings on boot:
EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe builds the initramfs image that is used to boot from an
encrypted rootfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package adds some files needed by the trustfence initramfs and that
are not included in other packages.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
sysinfo is a bash script which gathers all the relevant information
from a running system on a timestamped compressed file.
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Victor Rubio Victor.RubioTorroba@digi.com
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
That restriction does not make any difference in the final image
contents, because no package depending on X11 is added to the image, and
it prevents the image from being built with the default DEY
configuration (that has X11 distro feature enabled).
This also allows to build the image in the buildserver with the same job
that builds other X11 based images.
https://jira.digi.com/browse/DEL-2106
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move this variable to DEY distro conf so that it is available for any
recipe built with the distro.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
It has been observed that the wireless interface ocassionally fails to resume
from suspend on extensive long run validation testing, so we workaround it by
bringing the interface down before suspend and bring it up again after resume
This reverts commit a77cd1406d.
https://jira.digi.com/browse/DEL-2217
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This image provides a demo rootfs with QT. It can be built for
framebuffer and also for X11.
https://jira.digi.com/browse/DEL-2196
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a user-space workaround for the reboot/poweroff problems we
are having in the ccimx6sbc. Seems that they are not reproducible when
only one core is enabled, so the workaround is to disable the rest of
the cores for rebooting/halting.
https://jira.digi.com/browse/DEL-2133https://jira.digi.com/browse/DEL-2148
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit a9e36a74bb20ab38f220116ba2742dca3d80c293)
So we can build a 'dey-image-graphical' image for framebuffer with
support for QT5.
https://jira.digi.com/browse/DEL-2017
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No functional change, as 'package-management' is added via the included
dey-image-minimal recipe, and 'pointercal-xinput' is a dependence of
xinput-calibrator which is added for X11 images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We switch to the way it works in Android, short press (<2s) takes the target
to suspend and long press, >2s but <9s, performs a software controlled
power down.
Pressing longer than 9 seconds does the uncontrolled hardware power off
directly from the PMIC.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The suspend script did a ifup/ifdown on wlan0 to workaround issues we
had using wireless drivers on some platforms.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has a hard-coded dependence in bluez4 and this has been removed from
openembedded-core.
There is a different Jira for the bluez5 migration.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Microcom is a minimal version of minicom and is extremely useful
for doing basic testing on target (for instance, talking to a modem
or other serial connected device).
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
(cherry picked from commit 90c6708e948c9b9942b48d425ff21e0affc2f8d7)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the networking configuration to support the creation of a bridge
interface.
Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com
Isaac Hermida
Javier Viguera
Diaz de Grenu, Jose
Alex Gonzalez
Stephan Klatt
Victor Rubio
Hector Palacios
Jose Diaz de Grenu de Pedro
Paul Osborne