Adding sdk support by copying the files from ccimx6sbc and replacing the
machine.
https://jira.digi.com/browse/DEL-2529
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
COMPATIBLE_MACHINE is a regular expression, so we need to update the current
pattern for ccimx6 due to it will also match with ccimx6ul.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
'build-linux.digi.com' is the old DEL buildserver that sooner than later
will be decommisioned (hopefully) so just don't depend on it for DEY
builds.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
That restriction does not make any difference in the final image
contents, because no package depending on X11 is added to the image, and
it prevents the image from being built with the default DEY
configuration (that has X11 distro feature enabled).
This also allows to build the image in the buildserver with the same job
that builds other X11 based images.
https://jira.digi.com/browse/DEL-2106
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use LAYERDEPENDS to configure the layer dependences for meta-digi-arm
and meta-digi-dey.
https://jira.digi.com/browse/DEL-1129
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise building the demo application fails with:
| DEBUG: Executing shell function do_configure
| Project ERROR: Unknown module(s) in QT: svg
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This patch adds a udev rule and a script to detect HDMI hotplug and create
the HDMI audio pulseaudio sink if needed (that is, if the system was
booted with no HDMI cable plugged).
https://jira.digi.com/browse/DEL-2327
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
A patch sent upstream has been finally merged so this commit is not
needed anymore.
This reverts commit 6a66656161.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
module-udev-detect blocks the sound interface on boot for about five
seconds while detecting the hardware. This patch removes it so that
module-detect is used instead, which uses static hardware detection and is
faster.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Old versions of u-boot 'v2013.0x' have a bug in the shell's test command
that makes structures like:
if test "${not-existing}" = "0x01"; then ...
if test -z "${not-existing}"; then ...
to fail when the checked variable does not exist.
So implement workarounds in the updater script to overcome this problem.
This is needed because the script may be used in modules with an old
pre-installed u-boot.
https://jira.digi.com/browse/DEL-2231
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The install script allows for an easy deployment of the DEY firmware
artifacts into the eMMC of the ConnectCore 6 by using a micro SD card.
The install script:
- updates U-Boot
- resets the U-Boot environmnet to default values
- formats the User Data partition of the eMMC
- installs the firmware images (linux and rootfs partitions)
- resets/starts the system
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
The canonical symlinks created by poky's U-Boot class in u-boot.inc for
the different U-Boot configs are in the form:
u-boot.imx-<config>
u-boot-<machine>.imx-<config>
These symlinks have the .imx file extension hidden in the middle of the
file name, which looks ugly.
For DEY, remove these unused symlinks and generate new ones in the form:
u-boot-<config>.imx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
Move this variable to DEY distro conf so that it is available for any
recipe built with the distro.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
There is another OpenGL demo application QT5 Hello Windows for testing
purposes.
https://jira.digi.com/browse/DEL-2184
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has been observed that the wireless interface ocassionally fails to resume
from suspend on extensive long run validation testing, so we workaround it by
bringing the interface down before suspend and bring it up again after resume
This reverts commit a77cd1406d.
https://jira.digi.com/browse/DEL-2217
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This image provides a demo rootfs with QT. It can be built for
framebuffer and also for X11.
https://jira.digi.com/browse/DEL-2196
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are different SBC boards IDs each one having a different
device tree file in the form imx6X-ccimx6sbc-idZZZ.dtb, where:
X is the CPU family (q=Quad/Dual, dl=DualLite/Solo).
ZZZ is the board ID number.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2160
As the plan is to use the same git objects (SHA1) in the internal and
github repos, also remove that internal/external SRCREV infrastructure.
https://jira.digi.com/browse/DEL-2205
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We were masking meta-fsl-arm linux recipes to clean some warnings on
bitbake parsing. This does not happen anymore with new versions of
Yocto, so just remove this BBMASK.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Carrier board version is determined by U-Boot variable $board_id
which will be defined if a board ID has been burned on certain
OTP bits.
Use the value in this variable to create the $fdt_file variable
using the suffix "-id${board_id}" to point to the device tree
file that matches that board ID.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2160
This install the 'obexd' server which is needed for the QT5 bluetooth
file transfer example applications.
https://jira.digi.com/browse/DEL-2147
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Generalize bluetooth support so it can be used not only with bluez4 but
with bluez5 as well. Use EXTRA_QMAKEVARS_PRE to pass the packageconfig
options to the do_configure task.
https://jira.digi.com/browse/DEL-2147
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a user-space workaround for the reboot/poweroff problems we
are having in the ccimx6sbc. Seems that they are not reproducible when
only one core is enabled, so the workaround is to disable the rest of
the cores for rebooting/halting.
https://jira.digi.com/browse/DEL-2133https://jira.digi.com/browse/DEL-2148
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit a9e36a74bb20ab38f220116ba2742dca3d80c293)
Also initialize the video sink to 'glimagesink' in case it has not been
configured from the environment, but only for the X11 application
(gtk-play). This recipe also provides a command line application for
framebuffer (gst-play) that is not affected by this change.
https://jira.digi.com/browse/DEL-2132
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This disables images prelink, which according to the mailing lists it's
broken for ARM and other architectures. It's also reported to make gdb
fail sometimes.
https://jira.digi.com/browse/DEL-2150
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The example applications are not packaged by default, so extend the
recipe to create a package with the example applications.
https://jira.digi.com/browse/DEL-1960
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The script toggles the BT power GPIO regardless of the value being
undefined.
Check that the GPIO is defined before trying to toggle it.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Isaac Hermida
Javier Viguera
Jose Diaz de Grenu de Pedro
Hector Palacios