The SD card images support added a dependence to mkimage native tool.
Otherwise the build may fail with:
mkimage: not found
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With yocto 1.8 we need to pass CC and LD from yocto environment to
imx-bootlets makefile. Otherwise it fails:
arm-dey-linux-gnueabi-ld: cannot find -lgcc
make[1]: *** [output-target/linux_prep] Error 1
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 1.8 is more strict in the syntax when you append more flags to the
CFLAGS variable, because with previous yocto versions these packages
used to build fine and now fail with:
run.sstate_create_package: Syntax error: "(" unexpected
Use a different EXTRA_CFLAGS variable for our custom flags instead of
the standard CFLAGS.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The removal was added as a workaround to avoid installing a generic
asound.conf that was conflicting with our cards.
This is no longer needed as poky installs an empty asound.conf and
meta-fsl-arm overrides it with per-platform asound.conf files.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Those hacks were added to fix a problem when building development images
(with 'dev-pkgs' image feature enabled). In that case the developemnt
packages (libdigi-dev and microwindows-dev) have a dependence on the
normal packages (libdigi and microwindows). But those packages are not
created by default because they are empty, thus the needed ALLOW_EMPTY hack.
Fix the problem by just resetting the runtime dependences of the -dev
packages. This allows to not create empty libdigi and microwindows
packages.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
While on it, rework and simplify atheros firmware recipe:
* remove 'unknown' version (renamed recipe)
* do not create empty debug and development packages
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Needing to set the branch where a specific SHA1 revision is contained is
a unnecessary constraint that can be bypassed setting 'nobranch=1' in
the SRC_URI.
We do that for all the external repos (GitHub) plus the internal ones
for the im-xbootlets and the atheros kernel module (as those two repos
are stable enough and we are not developing actively on them).
For U-Boot and Linux we keep the SRCBRANCH framework for internal repos
as this is needed for the AUTOREV yocto feature.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Starting with Yocto 1.6 there is a need to configure in which branch a
specific SHA1 revision is included. We need a framework to set such
branches both for internal git repos and for external ones (Github).
If the branch is not specified in the SRC_URI, the do_fetch task may
fail even though the SHA1 revision exists in the repository.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default EMMC boot partition is locked. This prevents fw_setenv
utility to configure the u-boot environment from Linux.
This commit adds a patch that unlocks the EMMC boot partition just
before writing into it and then locks it again once the environment is
written.
https://jira.digi.com/browse/DEL-1021
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The setlocalversion script in u-boot 2009.08 did not have the
'--save-scmversion' parameter so the build was failing.
But for that version the whole do_compile_prepend can be removed because
it's not needed at all.
While on it, update the revisions for versions 2009.08 and 2013.01 to
include a fix done in 'setlocalversion' script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fix an error building 'nvram' for ccardimx28js:
ERROR: Fetcher failure: Unable to find revision ... in branch master even from
upstream
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This cleans following warning:
Use of PRINC is deprecated.
The PR server should be used to automatically increment the PR.
See: https://wiki.yoctoproject.org/wiki/PR_Service
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Building u-boot with Yocto does not show the version string in the
u-boot header. This is due to how Yocto compiles u-boot. It creates a
.scmversion file which may contain LOCALVERSION strings but in our case
it's empty. Later at build time u-boot's setlocalversion script detects
that file exists and exits with no further action (because it assumes
the file contains the version string).
https://jira.digi.com/browse/DEL-1007
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Provides fw_printenv/fw_setenv utilities to read/write the u-boot
environment from Linux.
https://jira.digi.com/browse/DEL-800
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is now used in both ccimx6adpt and ccardimx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Formfactor config files are needed in now so the touchscreen calibration
is loaded on target's boot. Otherwise the touch is not calibrated.
https://jira.digi.com/browse/DEL-910
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was supported in kernel 2.6.35 (FSL release) but not in community
kernel 3.10
https://jira.digi.com/browse/DEL-839
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the BOARD selection out of the bootlets recipe so it can be used
from machines defined in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version does not properly work with v3.10 kernel, while
the newer version 3.0.35-4.1.0 does work for old and new
kernels.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
This set of patches are forward port of patches for old version
10.12.01 and to make it work with v3.10 kernel.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
Most SRC_URI defaults to DIGI_LOG_GIT. This patch sets a more generic
name (DIGI_GIT) that defaults to DIGI_LOG_GIT, but is configurable by
someone who might want to tune it (DIGI_MTK_GIT, etc.).
Signed-off-by: Seth Bollinger <sethb@digi.com>
New kernels don't get CPU information from U-Boot ATAGS and
so the /proc/cpuinfo file does not have the Hardware/Revision
lines filled in.
This patch gets the CPU model from the device tree information
at /proc/device-tree/compatible.
For backwards compatibility, if the CPU model cannot be retrieved
from this file, we try to get it from /proc/cpuinfo.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
wmiconfig is Atheros proprietary code so the recipe builds from source
if DIGI_INTERNAL_GIT is defined or uses a prebuilt binary otherwise.
https://jira.digi.com/browse/DEL-640
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We are now using yocto kernel headers (3.x) in the toolchain so the
patches need to be applied regardless of the version of the running
kernel.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If people are creating derivative machines in their layer, make
COMPATIBLE_MACHINE more flexible. Use SOC_FAMILY instead of specific
machine types. This allows users to more easily share these recipes.
https://jira.digi.com/browse/DEL-676
Signed-off-by: Seth Bollinger <sethb@digi.com>
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Similar commit was done in DEL.
Japanese law limits the maximum transmit power for Bluetooth to 3 mW.
The cert field in OTP will be set to 2 when units are manufactured
for Japan.
Updated the bluez init script to configure Bluetooth for class 2
operation if the cert field is set to 2, and to delete the class 1
configuration file since it would be illegal to use it in Japan.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
move ccardimx28js specific patch under PN-PV subdirectory. Otherwise it
fails to find the patch (this version of yocto restricts the FILESPATH
where to look for files)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The build was failing for any IMX platform because it was trying to
build a bootstream u-boot.
The u-boot variables (UBOOT_*) used by yocto were incorrectly set,
so I reworked and simplified them to fix the bug and ease maintenance.
https://jira.digi.com/browse/DEL-562
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
QA Issue: Variable ALLOW_EMPTY is set as not being package specific
QA Issue: Variable RPROVIDES is set as not being package specific
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The external repositories have been cleaned up and commits have been
squashed so the sha1s need to be updated.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The public branches of those repositories have been cleaned up so
the external sha1s have changed.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The final product will be called "Digi Embedded for Yocto" or DEY for
short.
This commit renames all relevant files.
https://jira.digi.com/browse/DEL-474
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Otherwise a dev or sdk image which include the dev-pkgs image feature
will fail.
https://jira.digi.com/browse/DEL-488
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
https://jira.digi.com/browse/DEL-331
While on it, fix whitespace problems (mixed tabs + spaces) in the
bitbake recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- Merge SRCREVS
- Remove UBOOT_MAKE_TARGET_paltform as they already are in machine
configuration files.
- Merge DEPENDS_mxs_platform as they are equal.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
According to the Poky reference manual, SUMMARY inherits DESCRIPTION, so
it's better to have only a DESCRIPTION or both.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
INC_PR is used in include files to that the recipes that include them
can use it to increment the PR.
In this recipe what we need is to set the PR.
An example from the Yocto dev manual:
recipes-graphics/xorg-font/xorg-font-common.inc:INC_PR = "r2"
recipes-graphics/xorg-font/encodings_1.0.4.bb:PR = "${INC_PR}.1"
recipes-graphics/xorg-font/font-util_1.3.0.bb:PR = "${INC_PR}.0"
recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
All bbappend files will start as follows:
# Copyright (C) 2013 Digi International.
PRINC := "${@int(PRINC) + 1}"
PR_append = "+${DISTRO}"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This recipe install an init script that allows to set some alsa audio
parameters without having to touch the default alsa states.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
kobs-ng is needed to be able to flash the bootloader from user space
in mxs platforms.
Fixes https://jira.digi.com/browse/DEL-340
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Just a cosmetic name change for the merged wired and wireless platforms.
This and related commits fixes https://jira.digi.com/browse/DEL-188.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Javier Viguera
Alex Gonzalez
Hector Palacios
Seth Bollinger
Francis Sreeves