Upon a p2p link, an auxiliar iface "p2p-iface-[0-9]" is created. If
it is not specified to the wpa_cli command, a different interface may
be used (eg, wlan0), leading to a failure.
Make the script more robust by detecting the new interface.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Some wifi-related functionality was enabled on ccimx93 overrides. The
ccimx91 also needs this functionality but it was not being applied as
the overrides were only for ccimx93.
Generalize the overrides for ccimx9.
https://onedigi.atlassian.net/browse/DEL-9214
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The P2P interface may have a different name, for instance, in the ccimx93 it
is wfd (wifi direct).
Generalize Digi P2P scripts to use the name from the platform config file.
https://onedigi.atlassian.net/browse/DEL-8468
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This recipe had a post install script to do the following:
- create runlevel symlinks.
- comment the 'auto' lines of /etc/network/interfaces if running on
a non-Wi-Fi variant.
- add Atheros or QCA bridge examples depending on the detected chip.
- add wlan1 interface only if QCA chip is detected.
This post install cannot run on a read-only-rootfs so the recipe has been
reworked to do the same things at build time:
- the runlevel symlinks have been removed because they are taken care
of by a poky class.
- add a pre-up condition (the existance of a wireless entry on the device
tree) so that the interface is not brought up if the condition is not met.
- for the cc6/cc6n, since the Wi-Fi chip can be Atheros or QCA, add
specific wlan1 and br0 fragments with a pre-up condition basing on the
detected ID of the Wi-Fi chip
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
Some packages require different scripts, configuration files or installations
depending on the wireless chip assembled on the target. In general, the way
to support both chips in one image is to have the recipes install both
versions of the aforementioned files, then leave only the strictly necessary
version once the wireless chip can be deduced.
In the case of the init-ifupdown recipe, this involves installing temporary
configuration fragments that are later erased. In the case of the standby
script, the logic can be implemented in a single file.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This interface should be the last item defined in the
/etc/network/interfaces file.
When you try to enable the interface br0 (bridge interface),
all the other interfaces should be available.
If the br0 interface is located before the other interfaces
involved in the bridge, it will fail.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Use ifupdown variable 'p2p-network-id' to pass a WPA supplicant network
id, to pre-populate some parameters (SSID/passphrase) when creating the
group where this device is the GO.
Also replace go_intent=7 with the auto parameter. According to the
documentation:
"auto" can be used to request wpa_supplicant to automatically
figure out whether the peer device is operating as a GO and if so,
use join-a-group operation rather than GO Negotiation.
https://jira.digi.com/browse/DEL-6741
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the error message when specific network scripts
are launched.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6728
This way, the wlan1 interface will only be created whenever a user wants to
bring the interface up with ifupdown. Modify the script to be able to delete
the interface whenever it gets brought down and remove its .sh file extension
so run-parts can run it properly during the ifup process.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Tests have shown that having this interface up hinders wlan0's performance,
so don't bring it up by default.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
To avoid bringing up interfaces before they're created by udev scripts
(specifically wlan1), wait until udev settles before starting the service.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When using systemd, putting the wlan1 interface up wasn't working because it
was relying on initscripts that are no longer in the filesystem.
Add a parametrized version of the upstream hostapd service to be able to use a
configuration that's different from the default one. Also, modify the
generation of the wlan1 entry in /etc/network/interfaces to be able to use
different post-up/pre-down hooks depending on the init manager that's being
used.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit:
- moves the files in platform folders 'ccimx6qsbc' and 'ccimx6ul' to the
recipe's folder (they are the same).
- moves the install instructions for virtual wlan and wlan1 into functions
that can be reused by both platforms.
- moves the bridge example install instruction to the generic do_install()
since it's the same for all.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
virtwlans script creates an additional interface on startup for QCA6564 chip.
The created interface purpose is for ap mode, so specify its type on creation.
https://jira.digi.com/browse/DEL-5290
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
wlan1 is the interface used for SoftAP, so use that one instead. This also
matches with the 'Network bridging' chapter of the documentation.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The bridge example uses the wireless interface and it assumes that it is
initialized, so it must be placed after it.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the interfaces that are managed by Networkmanager
from the /etc/network/interfaces entry.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The readlink command on a real file was expanding to nothing and then
the '/etc/resolv.conf' file was not being updated with the nameservers.
With this change we only run the 'readlink' link command after checking
that the file is actually a symbolic link.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Added a post-installation script to disable the wireless interfaces on
module variants without wireless support.
This fixes following messages on boot:
wlan: driver load failure
modprobe: can't load module wlan (extra/wlan.ko): No such device
...
https://jira.digi.com/browse/DEL-3781
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This 'sed' command was used in the past, when DHCP or MANUAL was
configured in the '/etc/network/interfaces' (for cellular). This is no
longer true as we always configure the interface with a custom (manual)
script.
This was breaking the rest of interfaces when configured to use 'dhcp':
iface eth0 inet manual
umanualc_opts -S -b >/dev/null &
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
udhcpc options added to 'network/interfaces':
* '-S' to log to syslog too.
* Redirect the output to '/dev/null' not to show messages of the tool running
in background (for example when executing 'ifup').
* '&' to send the udhcp client to background.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit verifies that the wlan1 interface is not already created
and will skip creating the virtual interface if it already exist.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3917
This commit changes the concurrent mode script to enable always the
AP interface through the wireless device but will warn the use
if the virtual MAC addresses used are the default once.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3900
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add commented lines as example to configure and run the wlan0 interface in AP
mode using hostapd daemon.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
According to 'grep' manual '\s' is a synonym for [[:space:]] which
matches spaces, TABs, but also newlines, etc. We want to only match
spaces and TABs, so use [[:blank:]] instead.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* set cellular user and password
* stricter replace to not match set values
* only set cellular interface to auto
Internal merge of Github's PR:
https://github.com/digi-embedded/meta-digi/pull/2
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the networking configuration to support the creation of a bridge
interface.
Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com
Isaac Hermida
Arturo Buzarra
Javier Viguera
Mike Engel
Hector Palacios
Gabriel Valcazar
Francisco Gil
Jose Diaz de Grenu
Tatiana Leon
Alex Gonzalez
Stephan Klatt
Jose Diaz de Grenu de Pedro