Changes in Poky (Dizzy) made our SDK unable to build QT applications.
This commit syncs again with upstream so the toolchain is able to build
QT apps.
https://jira.digi.com/browse/DEL-1544
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 1.7 Dizzy added support for os-release file in a new recipe, so
we need to remove it from our base-files bbappend in order to avoid
conflicts between both packages.
https://jira.digi.com/browse/DEL-1390
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This can be used as a template for size optimized images. It constraints
the use of X11 related packages and the image types used.
To build, add the following to your conf/local.conf:
DISTRO_FEATURES_remove = "x11"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Also remove config entries in '/etc/network/interfaces' if corresponding
variable is not defined.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Allows to configure static DNS servers in resolv.conf setting following
variables in your project's config file:
ETH0_STATIC_DNS, ETH1_STATIC_DNS, WLAN0_STATIC_DNS
Those variables accept multiple dns servers (separated by spaces)
https://jira.digi.com/browse/DEL-1266
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the package manager postinst framework to run the rootfs resize
script on first boot after the image has been flashed to the EMMC.
https://jira.digi.com/browse/DEL-1317
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP to support 'connmand' for dhcp.
* CONFIG_CTTYHACK to make easier boot from an initramdisk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No longer needed because a patch with the same functionality was
accepted upstream (meta-fsl-arm).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was added in the past (dey-1.4) as a workaround for reboot/poweroff
issues not completing properly [DEL-633]. At that time the util-linux
umount command worked while the one from busybox didn't. Now this
workaround is not needed anymore. The reboot/poweroff commands complete
correctly with busybox' umount, so just remove the runtime dependence.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to easily build QT applications sourcing the toolchain
environment setup script and then running:
$ qmake -project
$ qmake
$ make
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the 'mkimage' host tool to the toolchains generated with 'bitbake
meta-toolchain' or with 'bitbake -c populate_sdk <image>'.
This allows to use the standalone toolchain to build kernel images of
type uImage (with u-boot header)
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We used to have two distros:
DEY: without X11 support
DEY-GUI: with X11 support
After the change, we have just one DEY distro with X11 support. At the
same time add a CONFLICT_DISTRO_FEATURE to dey-image-minimal so it
cannot be built with X11 distro feature enabled. So now in order to
build 'dey-image-minimal':
DISTRO_FEATURES_remove = "x11"
needs to be added to your project's local.conf file.
https://jira.digi.com/browse/DEL-858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NETWORK_MANAGER is a packagegroup-core-x11-sato recipe variable, so
override it in a bbappend instead of at a distro level.
At the same time remove a useless WEB variable from the image recipe.
WEB is a packagegroup-core-x11-sato local variable as well, and
overriding it in another recipe does not have any effect, so just
remove it.
https://jira.digi.com/browse/DEL-858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was working in dey-1.4 because there was a basic support for static
nodes in poky. They removed it in Yocto 1.6.
We still need this functionality, so add it here in the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Remove inconditional inclusion of dey-gstreamer: dey-image-minimal
includes dey-gstreamer if MACHINE_FEATURES contains 'accel-video'
so dey-image-graphical inherits this from dey-image-minimal.
This does not make any difference for IMX platforms but allows to
remove inconditional inclusion of dey-gstreamer for MXS. To allow
'gaku' (sato audio player) playing MP3 files COMMERCIAL_AUDIO_PLUGINS
is added to the distro config file.
* Only include 'owl-video' if MACHINE_FEATURES contains 'accel-video'.
* Remove inconditional inclusion of qt4-examples from dey-qt
packagegroup. Package qt4-examples is part of the RRECOMMENDS for
package qt4-demos, so it will be included anyway and not having it
hard-coded allows to bad-recommend it for some platforms and not
for others.
* Use BAD_RECOMMENDATIONS to avoid inclusion of 'qt4-demos-doc' package
for all platforms (this package does not add any value and weights
about 50MB) and 'qt4-examples' for ccardimx28js.
With all those changes, we get a graphical image with GTK + QT that fits
in the standard rootfs partition for ccardimx28js.
https://jira.digi.com/browse/DEL-1164
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The interfaces file is now dynamically created for eth0, eth1 and wlan0. By
default they are configured if enabled in the machine features, and have
the same static configuration as before.
The static IPs can be configured as follows:
ETHn_STATIC_IP = "<ip address>"
ETHn_STATIC_NETMASK = "<netmask>"
ETHn_STATIC_GATEWAY = "<gateway>"
WLAN0_STATIC_IP = "<ip address>"
WLAN0_STATIC_NETMASK = "<netmask>"
To configure dynamic IPs you can use the following configuration in your
local.conf:
ETHn_DHCP = "dhcp"
WLAN0_DHCP = "dhcp"
https://jira.digi.com/browse/DEL-1178
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
By removing the driver on ifdown and loading it on ifup we workaround some
problems found in long run suspend stability testing.
https://jira.digi.com/browse/DEL-1084
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This removes the Openembedded logo and leaves the kernel splash until
the desktop is ready.
https://jira.digi.com/browse/DEL-1131
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was needed to overcome some corner cases with storage devices on
suspend/resume using MDEV as device handler.
Now we are using UDEV and after some tests done it seems that the
'resume_storage_devices' hack is not needed anymore.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
udhcpc's '-R' option means 'Release IP on exit'.
This fixes a strange corner case on reboot: if you configure your network
interface to DHCP in '/etc/network/interfaces' AND you have some NFS
share mounted on your system, then running reboot command fails to
complete and it hangs on:
'Unmounting local filesystem'
This happens because on reboot TERM and KILL signals are sent to all
the processes in the system before umounting the local filesystem. When
udhcpc daemon receives the signal it exits and releases the IP (because
it was launched with '-R') leaving an unconfigured network interface
that later is unable to umount a network filesystem (NFS), resulting on
'reboot' command being unable to complete.
Removing the '-R' option from udchpc allows to kill the process without
unconfiguring the network interface.
https://jira.digi.com/browse/DEL-1125
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The original defconfig came from DEL. Make the defconfig more similar to
the Yocto default one.
This restores the default udhcpc options when running via ifup to '-R
-n'. This is important because without '-n' the target can wait forever
to get an IP on boot while maybe the network is not available.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rework the conditional expression so the overall return value of the
script is not failure, because in that case the 'ifup' command fails
with:
run-parts: /etc/network/if-up.d/ifup exited with code 1
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This cleans following warning:
Use of PRINC is deprecated.
The PR server should be used to automatically increment the PR.
See: https://wiki.yoctoproject.org/wiki/PR_Service
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed in order to use eclipse as a graphical debugging IDE with
the Yocto eclipse plugin.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
So the output of 'reboot' command does not spread over different lines.
This is basically a cosmetic change to make target's output on reboot a
bit more beautiful.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These files were needed in previous versions of Yocto to overcome
different problems. Remove them as the default ones in current Yocto
version are good enough for our platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We use udev as device manager both for minimal and graphical images so
there is no need for these mdev extensions anymore.
https://jira.digi.com/browse/DEL-944
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also make DEY image recipes more robust to misconfigurations, by setting
explicitly the required and conflict distro features.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Alex Gonzalez