The defconfig file has been refreshed for the current busybox
version 1.29.2 maintaining the same applets enabled.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script was added a long time ago and it never gets used anymore, so remove
it from our images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Trustfence is not supported in the CC8X at the moment. This cleans the
following warning:
WARNING: meta-digi/meta-digi-dey/recipes-core/trustfence/trustfence-initramfs.bb: Unable to get checksum for trustfence-initramfs SRC_URI entry trustfence-initramfs-init: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 778fc424274fc0983c348f4da6ca09e1a7b5b859)
The defconfig file has been refreshed for the current busybox
version 1.27.x maintaining the same applets enabled.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These packages create dependency issues when compiling framebuffer images, and
they aren't essential. Include them only in ccimx6 images.
This reverts commit 2edb127d28.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Currently, it isn't possible to wake up the ccimx8x after suspending to RAM.
For now, use the less strict "freeze" low power mode instead.
https://jira.digi.com/browse/DEL-6148
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We now have different tarballs for each CPU architecture we compile for. Also,
add support for the aarch64 tarball.
https://jira.digi.com/browse/DEL-6046
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit:
- moves the files in platform folders 'ccimx6qsbc' and 'ccimx6ul' to the
recipe's folder (they are the same).
- moves the install instructions for virtual wlan and wlan1 into functions
that can be reused by both platforms.
- moves the bridge example install instruction to the generic do_install()
since it's the same for all.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the switch to using Bash as command line interpreter, the default
/etc/inputrc configuration file for readline doesn't allow the use of
some keys which are common.
This commit enables them to not change the user experience with previous
DEY versions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5623
The suspend script has conflicts with the suspend from bash, then
we decided to rename our custom suspend script to standby and create
a symlink called suspend to maintain backward compatibility.
https://jira.digi.com/browse/DEL-5622
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Sync defconfig to enable command 'chvt' because the xserver-nodm
init script requires this command in the stop process to swicth
the foreground virtual terminal after stopping the xserver.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Sync defconfig to enable command 'command' because /etc/profile
of base-files requires this command to be available. If it is not
available the following message is output during login on a image
using busybox.
-sh: command: not found
(From OE-Core rev: e41c90b852167bbcb434da57b84280e855acae33)
https://jira.digi.com/browse/DEL-5632
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This saves ~4MB of space and is not required for device detection.
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This tool was only needed for old kernels, newer kernels use the hardware
random number generator themselves.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This variable and all its references were removed in Yocto 2.4
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This class no longer exists, it has been merged with images_types.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
NetworkManager was experiencing an unexpected behavior managing
the network interfaces on a supend/resume process, then to avoid
this undesired behavior the suspend script will stop and restart
the NetworkManager service.
https://jira.digi.com/browse/DEL-5351
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
NetworkManager will be restarted on the suspend script so this workaround is not needed
This reverts commit b3ae030fce.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
With these changes we tell NM to not manage the wireless interfaces before
unloading the wireless module. This was causing some unexpected behavior that
crashed NetworkManager.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5351https://jira.digi.com/browse/DEL-4571
virtwlans script creates an additional interface on startup for QCA6564 chip.
The created interface purpose is for ap mode, so specify its type on creation.
https://jira.digi.com/browse/DEL-5290
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Turns out that the busybox' fdisk applet is also able to parse the GPT
partition tables. This saves around 0.5 MiB of space.
https://jira.digi.com/browse/DEL-4565
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
wlan1 is the interface used for SoftAP, so use that one instead. This also
matches with the 'Network bridging' chapter of the documentation.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The bridge example uses the wireless interface and it assumes that it is
initialized, so it must be placed after it.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Busybox's init enabled at build time collide with 'sysvinit' package.
This does not seem a problem when using RPM package manager, but using
IPK instead, the build is broken at image creation time:
Collected errors:
* check_data_file_clashes: Package sysvinit wants to install file <...>/rcS
But that file is already provided by package * busybox
https://jira.digi.com/browse/DEL-4573
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No applet has been enabled or disabled, just the defconfig file has been
refreshed for the current busybox version 1.24.x
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As we are using kernel's DEVTMPFS, using udev-cache on top of it does
not add much advantage. Disabling it has the extra advantage of avoiding
writing the udev-cache tarball under '/etc' (which probably won't work
on a read-only system).
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now the suspend script brings down all the wireless interfaces that are
managed by ifupdown command (in the '/etc/network/interfaces' file) and
then unloads the wireless driver.
On resume the script triggers an event so udev reloads the wireless
driver and then brings up the interfaces that were brought down on
suspend.
https://jira.digi.com/browse/DEL-4288
Signed-off-by: Javier Viguera <javier.viguera@digi.com>