This interface should be the last item defined in the
/etc/network/interfaces file.
When you try to enable the interface br0 (bridge interface),
all the other interfaces should be available.
If the br0 interface is located before the other interfaces
involved in the bridge, it will fail.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Digi Embedded Yocto 2.6-r3.1
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Mike Engel <mike.engel@digi.com>
Environment encryption is not yet supported in U-Boot.
Unset TRUSTFENCE_ENCRYPT_ENVIRONMENT on the machine configuration
and remove the platform conditional on the class.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The poweroff command is not available in the initramfs due to a missing
sysvinit/systemd dependency. Use the busybox "halt" command, since it's
available regardless of the init manager used. Rework the error message and
script variables accordingly.
https://jira.digi.com/browse/DEL-6983
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some configuration files inside of the SDK make use of the default SDK
installation path, so some tools might break unless the SDK is installed in said
default path.
Recently, we modified the default installation path to include the platform and
the image type, but the image type was added after the SDK was created, so even
though the environment script's paths include the image type, the "original"
default path in the config files inside of the SDK doesn't include the image
type. A side effect of this is that Qt5 apps cannot be built, since the qmake
and Qt configuration files are pointing to the "original" SDK path.
Remove the image type from the path so that the paths in the SDK's config files
match the real default installation path.
This partially reverts commit be0fe088e3.
https://jira.digi.com/browse/DEL-6972
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
XBEE_RESET_N_GPIO and XBEE_SLEEP_RQ_GPIO can now be comma-separated lists of
GPIO indexes instead of just a single index. Modify the xbee-init script to
support this change and modify the sed script in xbee.bb to allow commas
in the aforementioned variables.
https://jira.digi.com/browse/DEL-6887
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Rework the weston-init recipe and add a BBMASK to ignore meta-freescale's
weston-init.bbappend file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some .bbappend files for clutter, cogl and mesa recipes are already available
in meta-freescale, so we can remove them from meta-digi. Also remove the
libinput recipe, since a much newer version of it exists in poky.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Userspace firmware loading support is required for the Linux imx-sdma driver.
The patches that accomplish this were originally in poky, but were removed in
the thud upgrade. Re-work the patches so they apply over systemd v239.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, examples such as skeletalanimation are broken.
Reported-by: Alfonso Martin Rey <alfonso.martinrey@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCBRANCH in most recipes and SRCREV for gstreamer1.0-plugins-good.
update imx-gst1.0-plugin to v4.5.2.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCBRANCH in most recipes and SRCREV for gstreamer1.0-plugins-good.
update imx-gst1.0-plugin to v4.5.0.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some architectures like i.MX8M Nano don't have imxgpu2d but still need
some of the Gstreamer plugins.
For example, gstreamer1.0-plugins-bad-meta provides the xwayland sink which
would otherwise not be available for platforms without gpu2d.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Serial support to XBee cellular devices is deprecated since
the recommended communication protocol is USB, so we remove
the udev rules that supported these devices.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This dependency was originally removed in commit
eafa8684a3, but it was erroneously put back in
commit 793e901678 when updating the recipe using
the one in meta-fsl-bsp-release as reference.
Instead of removing the line containing the dependency, in order to avoid the
same situation from happening in the future, comment it out and add an
explanation about why we're removing it.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The .bbappend file in meta-freescale only applies these patches to platforms
with imxqpu2d, but they are necessary to build framebuffer images for the
ccimx8mn. Using the same approach as NXP in meta-fsl-bsp-release (applying the
patches to imxgpu platforms) duplicates the patches for platforms that are both
imxgpu and imxgpu2d, so append them for imx8mn platforms exclusively.
While at it, remove a patch that is no longer necessary, since the latest
versions of qtbase already have the patch's change in them.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches were copied from meta-fsl-bsp-release layer,
but with the latest versions throws a compilation issue with the
ccimx8mn platform. However the upstreamed patches works fine.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Hector Bujanda
Francisco Gil
Mike Engel
Arturo Buzarra
Hector Palacios
Gabriel Valcazar