* Disabled: dnsmasq and netconfig
* Enabled: cellular related options and connectivity check
https://jira.digi.com/browse/DEL-4289
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Avoid splitting the boot script message in two different lines:
Starting bluetooth hardware: [OK]
done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
After 0e7f5d3a47 both platforms probe both ports,
which is problematic (for example, ttymxc4 is the console in the 6UL based
platforms).
Use more concrete rules to avoid that problem.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
After the kernel update (v3.14 to v4.1) the sysfs path changed from:
/devices/soc0/soc.0/2100000.aips-bus/21f4000.serial/tty/ttymxc4
to:
/devices/soc0/soc/2100000.aips-bus/21f4000.serial/tty/ttymxc4
which caused the XBee Cellular not to be detected on the new kernel. These more
general rules are compatible with both kernels.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
mbedTLS is an open source, portable, easy to use, readable and flexible SSL
library.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
QMI modems didn't work with the version of
modemmanager that the dey-2.2-r1 release was
using.
We were using two patches for uBlox plugin to use XBee Cellular 3G
that are now merged in modemmanager master.
This updates modemmanager to use the commit where QMI
problem was fixed and also include uBlox patches.
https://jira.digi.com/browse/DEL-4192
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Add patch to MM, so it detects the U-Blox modem connected to the XBee
socket.
https://jira.digi.com/browse/DEL-4084
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee Cellular needs more time to settle down before MM is able to
detect it on boot. As this is connected to one of the 'ttymxc' serial
ports, use that port to conditionally delay the launch of MM.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding more retries to the port AT probing has an impact in modems not
using serial drivers (for example using qmi, mbim). It takes longer for
MM to detect those modems and then user space gives up waiting for the
modems to be available.
This reverts commit 682d77e414.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following changes have been made to the bluetooth-init script:
* Remove "hciconfig hci0 up/down" and this is now deprecated and likely
to fail. We use the AutoEnable feature of bluetoothd for this now.
* Move setting the MAC address to hciattach instead of using hcitool.
* Remove resets performed by hcitool and hciconfig. The hciattach
application already performs a reset and that should suffice.
* Remove hciattach retries.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commits adds patches to hciattach for the following:
* Strict flow control setting
The hciattach application has a flow | noflow command line argument that is
currently only applied on the first configuration of the uart port. The
hciattach_rome plugin ignores this setting and assumes hardware flow
control is always supported. This commits makes hciattach obey the user flow
control indication.
* Modify hciattach_rome to set MAC address. The MAC address setting
feature in the rome plugin now works with the command line specified
MAC.
* Reduce verbosity. hciattach now accepts a "-v" verbose flag. By
default verbose output it omitted.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Launching the MM on target's boot fails to detect the XBee cellular
because this needs more time to complete the initialization. So add some
more retries for the AT port probing to allow the XBee cellular to be
detected.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of redirecting the MM logging to '/dev/null' use a file, so we
can see what's going on in case of failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The flow control patches have been merged to the master branch, so
update the revision to remove those patches from our layer.
This reverts commit a7c51af5b8.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee cellular support is at the moment only in modemmanager's git
repository (master branch).
Also remove one Telit patch from the bbappend because it's already
included in the git repo.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version of libqmi is needed for newer versions of ModemManager.
Remove bbappend and patch to previous version as the patch is now
included in the new version.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The current script cannot launch the hostapd twice (for dual HostAP mode)
because start-stop-daemon finds an already existing PID for hostapd after
running the first instance.
The solution is:
- Do not launch the hostapd in background (so that it does not fork the
process, which assigns a different PID)
- Use -b option of start-stop-daemon so that it launches the daemon in
the background.
- Let start-stop-daemon create the PID (since the hostapd will not fork
now this PID will match the hostapd process, allowing to kill it later)
This solution also hides the hostapd log messages that appeared before.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4045
The original init script hardcodes the configuration file to use so it
cannot be re-utilized for concurrent AP/AP mode where two interfaces can
be used as SoftAP.
This commit uses the variable ${IFACE} to:
- select a specific configuration file per interface:
/etc/hostapd_${IFACE}.conf
- create a specific PID file per interface:
/var/run/hostapd.${IFACE}.pid
With this, the /etc/network/interfaces can use the script for using SoftAP
in different wireless interfaces.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- The Bluetooth daemon was always executed before setting up the
hardware, generating several problems specifically in the CCIMX6SBC.
This was causing the Bluetooth driver to override the Bluetooth name
and alias, as well as avoiding any host function on Bluetooth profiles.
Only pairing and ping was working, as well as client profile sides.
- This change also fixes some issues in the CCIMX6UL platforms with the
Bluetooth daemon failing to perform several bluetoothctl operations.
https://jira.digi.com/browse/DEL-4000https://jira.digi.com/browse/DEL-4015
Signed-off-by: David Escalona <david.escalona@digi.com>
The unlock retries feature from the Telit plugin does not work properly with
old versions of the Telit HE910 firmware. This has been fixed in upstream
commit: fbb607f0c25be3a4bb8692ee48445cf437345b6c
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
https://jira.digi.com/browse/DEL-3863
This reverts commit 3123085e72.
we revert this commit because the patch was already applied on mm-1.6.4
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Reviewing the patches while updating the QCA firmware to a new release,
I encountered this patch. On the original PR it says:
"Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this save us from some syncronism problems if we are not
using HW flow control."
Current spins of the module already use hw flow control. Also, not allowing
hciattach to override the baudrate does not seem right to me. It would be
enough with passing a 3M baudrate to hciattach to match the firmware
default.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit fixes an issue with ModemManager to return the correct
error code when an invalid QMI command is send to the modem.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3748
This commit fixes an issue with the Quectel EC21/EC25 due to a wrong
reported DMS version which will cause ModemManager not to read the
SIM card.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3748
Implement:
* support to start, stop and restart interface
* states machine and retries system to recover from command failures
* overall simplification and code clean-up
https://jira.digi.com/browse/DEL-3858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With the upgrade to Morty, there is a new bootscript that is provided
by Poky. This bootscript is just launching the generic bluetooth daemon,
but it's not doing any hardware initialization.
The fix is to split the hardware initialization to a different
bootscript 'bluetooth-init' and launch it also on boot.
https://jira.digi.com/browse/DEL-3855
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If you try to use libmbim (the API is used at least by mbim-network,
mbimcli and ModemManager applications) you get the following error:
ModemManager: Error converting string: Conversion from character
set 'utf-8' to 'utf-16le' is not supported
In order to solve this we need to integrate glibc gconv UTF16le library
in the build (and its dependencies).
Signed-off-by: Mike Engel Mike.Engel@digi.comhttps://jira.digi.com/browse/DEL-3830
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
There is now a WLAN user guide with configuration examples so there is
no need to pollute the default file with comments.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The LICENSE is added through the packagegroup bbclass and the checksums
were outdated making the build fail with:
The LIC_FILES_CHKSUM does not match for poky/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The wireless regulatory database has been moved to its own recipe, so
the update cannot be done bbappending this recipe.
This reverts commit 8e69db8ac5.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This parameter allows to set the time interval for scheduled scans in
seconds. This is usually managed by the wpa-supplicant dynamically, but
for example with DFS channels and non broadcasting SSIDs re-associations
take too long if the periodic scans time interval is not reduced.
https://jira.digi.com/browse/CC6UL-594
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Optimize the provided config file with default support for 802.11ac.
https://jira.digi.com/browse/DEL-3128
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this work arounds some synchronization problems when not
using HW flow control.
https://jira.digi.com/browse/DEL-3052https://jira.digi.com/browse/DEL-3057
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Copy of the original defconfig in hostapd-2.4 and enabling next options:
- CONFIG_LIBNL32
- CONFIG_EAP_PSK
- CONFIG_EAP_PWD
- CONFIG_WPS
- CONFIG_WPS_NFC
- CONFIG_RADIUS_SERVER
- CONFIG_IEEE80211N
- CONFIG_IEEE80211AC
- CONFIG_DEBUG_FILE
This means that the hostapd binary will have support for that features, but it
does not imply that the wireless chip does support it.
https://jira.digi.com/browse/DEL-2936
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Javier Viguera
Diaz de Grenu, Jose
Tatiana Leon
Salvador Penalva
Alex Gonzalez
Hector Palacios
David Escalona
Mike Engel
Isaac Hermida