This code path was added in the context of single MTD layout support for
ccimx6ul boards, but it was being executed in the default storage layout use
case as well. This could trigger a race condition in which one code path
deletes the mount point while the other one is still setting it up, causing
partitions to not be mounted automatically (specifically, the "update"
partition).
Since both code paths are mutually exclusive in our implementation, reflect
this by making sure that the single MTD layout path is executed only when said
layout is enabled in the U-Boot environment.
https://onedigi.atlassian.net/browse/DEL-7827
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 9a7ea10a4dfb74651f865f125372604fe6840a10)
The sign mode needed for each platform is invariable, and since the platform
is already a mandatory parameter for the script, we can store this information
implicitly. Reflect this change in every recipe where the script is used, but
keep the variable at the Yocto level since it's still needed in several places.
https://onedigi.atlassian.net/browse/DEL-7862
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The license checksum and the source branch should be on the properly
versioned bitbake recipes. Otherwise, when we include this common file
in a different version linux recipe (for example, the upcoming 5.10) it
will inherit incorrect values.
While on it, fix the incorrect license checksum values for the linux 5.4
recipes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the US Board Data File (BDF) to include the changes
required to pass the EN 300 328 V2.2.2 blocking test.
The new BDF files are:
- ccimx6/bdwlan30_US.bin (eb3d3cdafd30b30e837974177a281648)
- ccimx8m/bdwlan30_US.bin (72531e6e0870673e4ba2b02bd551925b)
- ccimx8x/bdwlan30_US.bin (1cf667271da33f6eb207360eeb3d4d63)
https://onedigi.atlassian.net/browse/DEL-7773
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This makes it so bitbake obtains the SDMA firmware from the firmware-imx recipe
instead.
This also avoids including all of the linux-firmware packages in i.MX6 SDK
builds, preventing errors when building the ccimx6sbc SDK (linux-firmware
provides the community versions of the ath6k and ar3k firmwares, which clash
with our versions).
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This makes it possible to distinguish between two different packages:
* NXP's tensorflow-lite, which contains modifications for i.MX platforms
* Our tensorflow-lite, which is meant to be used with Google Coral
Since tensorflow-lite-coral provides a subset of the files provided by
tensorflow-lite (specifically, the python libraries), make the packages
conflict during runtime.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is used by the eIQ recipes, so make sure we have NXP's .bbappend
so it works as expected
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a small oversight on NXP's part, because this package is pulled in as a
dependency of imx-vpuwrap, but it's only compatible with their EVK board,
making the build fail on any other i.MX8MP board.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
It seems like the version of mkfs.vfat used in Yocto 3.3 has a label name
length limit of 11 characters. All of the labels for our current platforms
surpassed this limit ("Boot ccimxX" alone already occupies 11 characters), so
replace the machine name with "DEY"
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These variables were originally set in NXP's recipes, but they moved their
definitions to each platform's configuration file. Set the appropriate values
where needed. While at it, replace every mention of the SOC_TARGET variable
with its new name, IMX_BOOT_SOC_TARGET.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe we ported from meta-imx has the same version number (v2.4) and
bitbake chooses the meta-freescale version because said layer comes before
meta-digi-arm in the BBLAYERS. Since the meta-freescale version uses different
platform overrides, the build fails, so filter it out to use our version
instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The common license file GPL-2.0 is now called GPL-2.0-only in poky, so we need
to reflect this name change to avoid errors
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
NXP now uses the meta-freescale version of the imx-boot recipe as a base, and
applies a .bbappend in meta-imx to apply more customizations. Reflect this
in meta-digi-arm and merge said .bbappend with ours. While at it, omit one of
NXP's operations in their do_deploy, since it breaks our build and doesn't look
essential.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe is only compatible with the i.MX8MP EVK, so it might be
platform-specific or board-specific. Add it for now to be safe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe was missing from our layer, so add it just in case it's needed
by any new package.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update the recipes to v8.14. NXP changed the mechanism used to load the sdma
and regulatory firmware (they now use firmwared), so remove our ccimx8mm sdma
fw service for now and see if we need a similar workaround with the new
mechanism.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 3.2-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The AHAB decryption process takes the encrypted file from the address defined
in U-Boot and decrypts it into the address defined in this script. If both
addresses are the same, the decryption process ends up failing. This
happens even for signed-only images.
Maintain the original addresses in this script so they do not collide.
This reverts commit c970d87d5a.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
If IMAGE_FEATURE 'read-only-rootfs' is active, the rootfs image
will be SQUASHFS.
Remove other root file system images, such as ext4, ubifs, sdcard.gz
to avoid confusion and use by install scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot uses partition names instead of partition indexes for the nand devices.
This commit syncs the boot scripts with the new dualboot variables.
https://onedigi.atlassian.net/browse/CC6UL-1254
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These folders /mnt/linux, /mnt/update and /mnt/data are
created by the automount_block.sh script. In a read only
system, these folders are not created raising some errors.
Creating these folders solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Create this symbolics links in build time instead of doing it
in run-time. This simplifies the system and allows it to work
with read only filesystems.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Before this patch the MAC addresses were read from the device
tree in the qualcomm.sh script executed at init, and a creates
a file where the MAC where located.
In 0a92f5d9e8df644de74e74f152ed6ff3dd8d3369 in the qca driver
the support to read these MAC addresses from the filesystem
was added.
This commits creates the simbolic link between the device tree
and the expected path where the MAC addresses where located, and
gets rid of the file with the MAC addresses.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
mkimage logs are required for signature on CC8X and CC8M platforms. Create a
copy in the 'imx-boot-tools' deploy directory so a prebuilt imx-boot file can
be later signed using the standalone signature procedure.
Build the 'print_fit_hab' target unconditionally so the log is available for
future standalone signature processes.
Also, use 'CONFIG_MKIMAGE_LOG_PATH' and 'CONFIG_FIT_HAB_LOG_PATH' variables to
point to the logs before calling the sign scripts. We no longer require
creating a symbolic link of the log files.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This change was accidentally reverted when merging to dey-3.2/maint, causing
the qualcomm module to be missing in the rootfs.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
By default, all platforms except ccimx6qpsbc work at 400 kHz on the i2c bus
connected to the ATECC508A crypto chip.
https://onedigi.atlassian.net/browse/DEL-7727
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Re-use RAMDISK address for authenticating the rootfs instead
of allocating a new address (if authenticating a rootfs, we're
not using a ramdisk).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add missing call to 'uuu' and erase the partition before creating
the UBI volumes.
Also add larger timeouts to erase operations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The config file /etc/fw_env.config is generated dynamically basing on
the partition table and, in the case of NAND-based SOMs, on the NAND
geometry. This is done on a postinst script that modifies the file on the
first boot of the target. Since this is not allowed on read-only-rootfs,
this commit adds a default fw_env.config file to use instead when
read-only-rootfs is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
This allows the packages to be included in the ccimx6sbc images. While at it,
include the Qualcomm bluez patches in ccimx6 builds. These patches aren't
destructive, they simply add functionality required by the Qualcomm chip, so
they shouldn't have any secondary effects when using the Atheros chip.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Other layers, such as meta-digi-dualboot, may add scripts to this
list on their layer.conf file. Depending on the order and priority
of layers, using a strict '=' here completely overrides previous
values, which is not desired.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add the '-m' parameter. Without it, the script doesn't
generate the output merged configuration file, and the
fragments are not applied.
- Fix the if condition. The '*.cfg' expands to a list of
files, but the '-f' only admits one parameter. Use instead
the Python find_cfgs() function.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable 'dualboot' (and 'singlemtdsys' for CC6UL) was restored
after the bootcmd that runs the first time after programming U-Boot runs
fastboot again to resume the script.
This is ok for the CC6UL but not for the rest of platforms, that run the
partition script on the bootcmd, *before* running fastboot.
Restore the variables for all platforms in the bootcmd right after
resetting the environment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot has embedded support to handle bootcount tries.
When the limit of tries is reached, U-Boot runs the script
in `altbootcmd` rather than the usual `bootcmd`.
This other script resides on meta-digi-dualboot layer.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Ensure stdout redirection to the USB interface is removed in every case.
Otherwise, it would be left redirected when INSTALL_UBOOT_FILENAME is
manually set.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Mike Engel
Gabriel Valcazar
Javier Viguera
Isaac Hermida
Arturo Buzarra
Ariel D'Alessandro
Gonzalo Ruiz
Francisco Gil
Hector Palacios