The fact of including both storage types (mtd and mmc) in the same 'sw-description' file is not providing any kind
of benefit. Instead, it makes the file larger, complex and harder to maintain. Additionally, most of the images
entries share the same structure and contents, changing only names and mount points. This commit simplifies the
'sw-description' file by configuring the storage type and the images to include in the SWU package at build
time, using a generic 'sw-description' template and template files for 'mmc' and 'mtd' images.
While on it, use the new 'DEY_FIRMWARE_VERSION' variable for SWU package version and fix the recipe to not include
all 'SRC_URI' files in the SWU update image, but only the required files for the update. Also, make use of variable
substitution provided by SWU class in the 'sw-description' file.
Note: SWU U-Boot update will be broken after this change. Waiting for official support with a robust implementation.
https://onedigi.atlassian.net/browse/DEL-8537https://onedigi.atlassian.net/browse/DEL-8538
Signed-off-by: David Escalona <david.escalona@digi.com>
While on it, rename the old "Firmware" variable to "DEY version", as it refers explicity to the DEY
distribution version.
https://onedigi.atlassian.net/browse/DEL-8539
Signed-off-by: David Escalona <david.escalona@digi.com>
If 'CC_DEVICE_TYPE' is not defined or it is empty use 'MACHINE' as the device
type in the Cloud Connector configuration file.
This commit also limits its length to a maximum of 255 characters.
https://onedigi.atlassian.net/browse/DEL-8531
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
There are two different firmware files for Bluetooth on Murata's type2AE
module:
- JRL: It configures a Bluetooth TxPower of 7dB, to be used in Japan
only.
- FCC.CE: It configures a Bluetooth TxPower of 5dB, to be used in the
rest of the world.
To comply with the FCC requirement that it should not be possible to
configure different regulatory domains, or in this case configurations,
than FCC, only deploy the FCC.CE file by default:
- BCM4373A0_FCC.CE.hcd (md5sum: 1e287a3ab7f83e59352cb321315ea80f)
This file reports the following information during boot time:
Bluetooth: hci0: 89373 UART 37.4 MHz wlbga_BU sLNA muRata Type 2EA 5dBm 20220608-0103
Bluetooth: hci0: BCM4373A0 (001.001.025) build 0155
JRL file will be added via the Worldwide DEY patch addon that customers
can request from Digi.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The only user of 'linux-dey-src.inc' was the linux recipe itself, so
instead rename that file to a more generic 'linux-dey.inc' and include
more common code in that renamed file.
This is in preparation for the new linux 6.1.1 recipe for the ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove patch file "0001-Makefile-Suppress-array-bounds-error.patch"
for ccimx93, as it is already included in the lf-6.1.1_1.0.0 revision.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Weston is not launched in read-only filesystem because /home/root
is not a writable path.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Replace the CLM blob file from Github, which supports several countries
with a custom US-only CLM blob file. This way, default images will only
have support for US regulatory domain, therefore complying with FCC
requirements.
The Worldwide CLM blob file will be provided by Digi International on
request.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
We can't run a post installation script in a readonly file system.
We need to provide a configuration file beforehand.
https://onedigi.atlassian.net/browse/DEL-8556
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
The user can modify them in their local.conf if needed.
https://onedigi.atlassian.net/browse/DEL-8552
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
In a squashfs the mount points are different and the current logic
wasn't working.
It's more reliable to check the /proc/cmdline to determine if
the system is a nand or an emmc.
Added also logic to get the active partition in nand devices
when the rootfs is squashfs.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When a squashfs image is flashed we need to delete the compression
field in the swupdate descriptor.
Also the rootfstype u-boot variable needs to be set to squashfs.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When the swu package is generated it needs the right
extension of the rootfs to be formed.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We used to use BAD_RECOMMENDATIONS to remove this package in ccimx6 builds,
we enable the imx-gpu-viv driver as built-in in our kernel, but this method
isn't working anymore. Instead, undo the specific RRECOMMENDS that pulls the
module in.
Apply the change for the aarch32 version of the package only, since this change
is only needed for the ccimx6 platforms.
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These variables are used to generate .sdcard images, and without them, said
generation will fail.
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We still need to use this downgraded version of dtc to be able to build
U-Boot v2017.03, so backport this patch to be able to build dtc with the latest
version of gcc
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This layer provides machine learning functionality, so include it in our
default layers so customers can use it out of the box if wanted.
https://onedigi.atlassian.net/browse/DEL-8551
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
NXP's machine learning packagegroup now has a dependency for gst-shark, a GPU
profiling tool which is provided by this layer. Since it's a part of a repo
that already exists in our manifest, simply add it to the default layers of all
i.MX platforms that support the machine learning feature to be able to include
its packages out of the box.
https://onedigi.atlassian.net/browse/DEL-8551
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit modifies the boot script condition to apply the overlay for MCA
based on HWID MCA field.
https://onedigi.atlassian.net/browse/DEL-8521
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Instead of depending on library releases in Pypi, update the recipe to compile latest
Github code. This allows to use minor fixes in DEY before a new release of the library
is available. While on it, set the 'SRCREV' to point to the last commit of the repository
for traceability.
Signed-off-by: David Escalona <david.escalona@digi.com>
Main development of the library will be done in Github. The Stash repository will be
used as a "security backup mirror", so update the recipe to always compile from Github.
Signed-off-by: David Escalona <david.escalona@digi.com>
This commits changes the CONFIG_CONSOLE_ENABLE_GPIO_NAME to be a string
and not an integer.
https://onedigi.atlassian.net/browse/DEL-8520
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
By default, the signing script generates a file without 'w'
permission so DEY cannot remove it from the deploy dir on
a clean operation.
Add the 'w' permission so that DEY can remove it on clean
operations and generate a new signed file when required.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Isaac Hermida
David Escalona
Tatiana Leon
Gonzalo Ruiz
Mike Engel
Javier Viguera
Francisco Gil
Gabriel Valcazar
Arturo Buzarra
Hector Palacios