Sync the .bbappend while keeping our ccimx6 patch and remove the 9.0.0.imx
recipe, since it's already available in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove recipes that are available in the community layers, include a new
.bbappend for python3-matplotlib and update the .bbappend for python3-wheel
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This patch was initially needed for a specific version combination of
NetworkManager (>= v1.22) and glib-2.0 (v2.63.3 - v2.64.X), but since the
hardknott branch of poky now provides glib-2.0 v2.66.7, the patch isn't
needed anymore.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We initially added newer versions of the recipes related to WPE Webkit in order
to incorporate performance improvements, but the hardknott branch of
meta-webkit includes even newer versions, so we can remove our recipes.
Reflect this change in our distro config file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The weston recipe we ported from NXP's meta-imx layer has the same name,
causing warnings to appear when applying our patches. To avoid confusion,
ignore the meta-freescale version of the recipe so that ours is the only
option.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 9e68d61f7c465800d62913c044e43c541f2eacd7)
Otherwise, the .bbappend applies to all existing weston recipes, and since our
patch is only available in our layer, bitbake will print warnings about the
patch not being found for those other recipes. This is harmless, since DEY
always uses NXP's version of weston, but it can be confusing, so avoid the
warnings altogether.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit d4464a8211bff6b315a8ed5d094b8c25099f4130)
Digi Embedded Yocto 3.2-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
SQUASHFS read-only rootfs cannot be unencrypted on-the-fly
so skip encryption if read-only-rootfs is active.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
When TrustFence and a read-only rootfs are enabled, U-Boot must
authenticate the SQUASHFS root file system. Add config switch to force
U-Boot to authenticate this image.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This mode is necessary in the recovery initramfs to be able to properly detect
any external storage device that might contain an update package. The
configuration option associated with this mode became explicit after upgrading
busybox to v1.34.1, so enable it in our defconfig.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The nand devices doesn't need to call the mount_cryptrootfs
script.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some recipes were forcibly removing conflicting packages.
This does not allow to add those packages back for users that
want to use meta-digi layer, but a different distro than 'dey'.
With the 'dey' distro override, such removals are only done
if using this distro.
Reported-by: Michael Burr <michael.burr@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7712
In the cc6ul we are not powering-off the supply of the XBee.
This is making that after a suspend/resume action the XBee
hangs due to ModemManager hasn't been stopped before the suspend.
Stopping ModemManager before going to suspend solves the issue.
https://onedigi.atlassian.net/browse/DEL-7701
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Since commit 11558352 ("swu-images: add "installed-directly" flag to
sw-description") the swu package images are streamed into the target without
any temporary copy to support devices with low memory available, that forces a
different order according with the swupdate documentation because scripts
should packed before the rest. This means that all the pre, post and shell
scripts will be executed after the images will be installed. This behavior
breaks the current support to mount the cryptorootfs node before install an
encrypted rootfs.
This commit moves the shell script to mount the cryptorootfs node to the
recovery initramfs and modifies the swupdate command line to call the shell
script before the images installation.
https://onedigi.atlassian.net/browse/CC8X-320
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since we added support for compressing rootfs images, we need to manage SWU
packages with a regular rootfs image and with compressed images. That support
was missing in the identification process when the SWU packet was verified.
This commit fixes the identification of compressed rootfs images.
https://onedigi.atlassian.net/browse/CC8X-320
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe had a post install script to do the following:
- create runlevel symlinks.
- comment the 'auto' lines of /etc/network/interfaces if running on
a non-Wi-Fi variant.
- add Atheros or QCA bridge examples depending on the detected chip.
- add wlan1 interface only if QCA chip is detected.
This post install cannot run on a read-only-rootfs so the recipe has been
reworked to do the same things at build time:
- the runlevel symlinks have been removed because they are taken care
of by a poky class.
- add a pre-up condition (the existance of a wireless entry on the device
tree) so that the interface is not brought up if the condition is not met.
- for the cc6/cc6n, since the Wi-Fi chip can be Atheros or QCA, add
specific wlan1 and br0 fragments with a pre-up condition basing on the
detected ID of the Wi-Fi chip
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
The access point configuration files are dynamically modified on a post
install script to generate an SSID name based on the last digits of the
MAC address (physical or virtual) assigned to a wlanX interface.
On read-only file systems, this is not possible, so add some conditional
code to the do_install() to use instead the $DIGI_FAMILY name.
Caveat: if several identical SOMs with read-only-rootfs co-exist on the
same network as APs, they will identify with the same SSID.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
Some packages require different scripts, configuration files or installations
depending on the wireless chip assembled on the target. In general, the way
to support both chips in one image is to have the recipes install both
versions of the aforementioned files, then leave only the strictly necessary
version once the wireless chip can be deduced.
In the case of the init-ifupdown recipe, this involves installing temporary
configuration fragments that are later erased. In the case of the standby
script, the logic can be implemented in a single file.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows the packages to be included in the ccimx6sbc images. While at it,
include the Qualcomm bluez patches in ccimx6 builds. These patches aren't
destructive, they simply add functionality required by the Qualcomm chip, so
they shouldn't have any secondary effects when using the Atheros chip.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Gabriel Valcazar
Arturo Buzarra
Hector Palacios
Francisco Gil
Mike Engel
Javier Viguera