This commit modifies the boot script condition to apply the overlay for DVK v1
on boards without the board_version variable defined.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds an overlay for DVK v1 and modifies the boot script to apply it
based on the board_version variable.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Partitions 'fip-a' and 'fip-b' are redundant at the moment. They are
not currently part of the dualboot system. In consequence, program
both partitons unconditionally during the install process.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Number of bootup logos is now configured using fbcon=logo-count parameter,
so use it instead of our deprecated custom code in the kernel.
For backwards compatibility, we add this parameter in the u-boot boot
script for all platforms but the ccimx93, where this is directly handled
by u-boot (v2022.04).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reverts commit 2bdfdc92e1.
This suffix was removed on error. The artifact does have the suffix.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This variable was removed from meta-st-stm32mp so we need to get rid of it
in meta-digi, too.
Reported-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8268
Rework the "build_uboot_scripts" to prevent changing the templates in
the WORKDIR, as those are part of the SRC_URI. Instead, change the
deployed scripts by using "sed" and redirection.
Also, removed UBOOT_HAS_FASTBOOT altogether, as there is no platform
that does not support fastboot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of overriding the whole do_compile function, just to reconfigure
u-boot for Trustfence, create a do_configure pre-function that takes care
of that. This allows the removal of duplicated code.
Also, disable the generation of u-boot environment artifacts. We are
not using them and so many u-boot artifacts in the deploy directory
are confusing.
Finally, adjust the names of the TF u-boot artifacts in the do_deploy
append function.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add configuration 'BUILD_UBOOT_SCRIPTS' to select whether to build the
boot and install scripts or not, and set it to 'true' by default.
This allows removing the scripts on upper Yocto layers.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Increase the timeout from 90 to 120s since it's a large image
and it may take more time on different NANDs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The U-Boot environment resides on a UBI volume. The uuu script
relies on the environment to save part of the commands that
U-Boot needs to execute after reboot in the middle of the
installation. If the UBI volume 'uboot_config' does not exist
the installer fails.
This commit:
- Creates a function -on the uuu script only- for obtaining
the result of running any U-Boot command (0=success, 1=error).
- Checks the existance of 'uboot_config' volume.
- Runs 'ubivolscript' script to create the UBI volumes layout
that generates the environment volume if it doesn't exist.
- Increases the timeout for running the 'ubivolscript' since
there are occasions in which 'ubi part' (which is part of the
script) takes more time (if it cannot find the fastmap).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
By default ccmp1 platforms have dualboot mode by default, however the required
boot script was added to ccmp15 platform only, so this commit fixes it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The first time the 'dualboot' variable is tested it is directly run in
the script and doesn't need to escape the special characters.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When Dual Boot is not enabled, 'rootfsvol' variable must point to the
single boot system rootfs partition 'rootfs'.
Explicitly set this value. Otherwise the script relays on the default
rootfsvol value, which may be a Dual Boot partition.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On the CCMP1 SOMs, we only consider a single system partition called UBI,
with many UBI volumes.
The variable 'singlemtdsys' allowed to change between this and
a system with multiple MTD partitions with one UBI volume each
(old approach on CC6UL).
This commit removes the variable and uses the logic as if it was set.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Tatiana Leon
Javier Viguera
Francisco Gil
Arturo Buzarra
Gonzalo Ruiz
Hector Palacios
Mike Engel
Isaac Hermida