The indexes of the MCA PWM controllers are different in Linux v5.4, so the
default value used by libdigiapix results in an error. Reflect this change and,
while at it, replace the default PWM with an IO connected to a user LED to make
the example more visual.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit c24d1d96 ("sysinfo: adapt script after removal of deprecated fsl_otp
driver") introduced a mistake masking the SEC_CONFIG[1] bit read from the OTP.
This commit fix the read command to force it in hex format and finally match
with the mask in the script.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit c24d1d96 ("sysinfo: adapt script after removal of deprecated fsl_otp
driver") introduced support to determine if a device is closed by checking
a new boolean property on the DT for the CC8X platforms, however the CC8M
platforms use the same mechanism. This commit modifies the sysinfo script to
check also the DT for the CC8M platforms.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit cbb38440 ("meta-digi-dey: sysinfo: Add chip revision sysinfo output")
introduced a new script variable to determine the SOC revision of the module.
However this entry only is available on the CC8X platforms. This commit checks
if the entry exist and then tries to read it to avoid unexpected issues with
devices without this entry.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the GPIO udev rules to change the group owner
and permission of the new gpio char driver. This will allow users
that belong to the digiapix group to access the char driver.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-7255
Add systemd auto-getty.service to run agetty on the console defined in the
kernel command line on platforms with systemd support.
This service replaces serial-getty@.service as the one responsible for
opening a tty port and prompting for a login name when
TRUSTFENCE_CONSOLE_DISABLE is configured.
https://jira.digi.com/browse/DEL-7242
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit removes the v4l2 example because they are superseded
by gstreamer examples.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-7211
- OTP section
- Use just one fixed path to the OTP nvmem device descriptor (instead
of a loop).
- Use '-v' for dumping all values with hexdump.
- TrustFence section
- For cc8x, determine if the device is closed by checking a new boolean
property on the DT: digi,tf-open|closed
- For the rest, check the SEC_CONFIG[1] bit using the new nvmem
descriptor.
- Change log from 'Device status' to 'Security status'
- Report UNKNOWN if nvmem device does not exist.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit f6a8de0067)
With the change of bsp now we have several entries under
/sys/bus/nvmem/devices/ in the CC6UL platform and we should
reduce the num of folders where the otp folder can be found.
ls /sys/bus/nvmem/devices/
bootloader
environment
imx-ocotp0
linux
recovery
rootfs
safe
update
https://jira.digi.com/browse/DEL-7082
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This allows to generalize the code instead of needing to replicate
overrides for each platform that contains the MCA.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Bluetooth class to support the bluez4/bluez5 distro features,
was removed due to bluez4 was removed from meta-oe some time ago.
This commit simplifies the requeriments adding directly the bluez5,
instead of the intermediate bluetooth class.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package has not been supported since OpenSSL was updated to v1.1.x, and it
has been deprecated by Microchip.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
-p : Test the standard periodic interrupts (uses timers, doesn't wake from low power)
-u : Test the standard 1 Hz interrupt (uses RTC ALARM)
-v : Test MCA periodic interrupts (uses RTC PERIODIC_IRQ)
-w : Test MCA 1 Hz interrupt (uses RTC 1HZ)
https://jira.digi.com/browse/DEL-6602
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
The watchdog and ADC devices were not being modified to belong
to 'digiapix' group, so the examples did not run properly when
ran as a user different than root.
Reported-by: Andreas Burghart <andreas.burghart@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6581
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The exported PWM channels now report the channel name under udev
EXPORT parameter.
Add the 'change' udev action type to the udev rules and use that
parameter to change the group ownership of the PWM channels to
digiapix group, so they can be used by non-root user.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the re-organisation of the python3 packaging, some of the
packages have disappeared and are now part of base packages.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For CC6/CC6Plus
- Add USER_LED0 alias (same as default USER_LED)
- Change aliases of the other LEDs to USER_LED1 and
USER_LED2 (without additional underscore and fixed
indexes, to match the board schematics)
For CC8X SBC Pro
- Add USER_LED0 alias (same as default USER_LED)
- Add USER_LED1 which was missing
- Increase indexes (due to removed MCA_IO19 on SOM v3)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit removes the following examples that were accessing
hardware interfaces:
- dey-examples-adc
- dey-examples-can
- dey-examples-gpio-sysfs
- dey-examples-spidev
- dey-examples-watchdog
The recipe 'dey-examples-digiapix' builds similar examples that make
use of Digi's APIX for accessing the hardware. Add this recipe to images
- dey-image-qt
- core-image-base
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5169
This reduces the number of files that must be modified when changing
branches between development/release modes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The device-tree being used on a system is a very important piece of
information to debug issues. On a host machine, dtc can be used to
reconstruct the DTS used from the /proc/device-tree folder structure.
While on it, remove extra white lines at the beginning and end.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Commit 491082c56ce34f3fd644f8d4457ccd52af951087 in poky layer enables
by default some security enhancements and optimizations for the compiler,
These extra checks added by the flag -D_FORTIFY_SOURCE=2 break the
CloudConnector build. This commit disables the extra validations only
for the CloudConnector recipe.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their BSP support is
currently unavailable.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
* Check for file before using it
This just avoids the failure, on mainline access to OTP would need to be
done differently, see:
https://jira.digi.com/browse/ACL-163
* Use compatible node instead of digi,machine,name
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
During the merge of the maintainance branch and the manual revert of
some recipes, these were forgotten.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their SOM support is
currently unavailable.
https://jira.digi.com/browse/DEL-6049
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
adc_sample:
- extend list of supported devices with MCA_CC8X
adc_cmp_sample:
- Add '-t' argument to specify the type of device.
- Added checking of threshold ranges to avoid confusion between
raw and voltage configurations.
https://jira.digi.com/browse/DEL-6001
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
- For most examples, since they apply to all platforms, remove
COMPATIBLE_MACHINE.
- For recipes related to specific hardware, add support to the new platform
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
While on it:
- add dey-examples-rtc unconditionally (rtc is never in MACHINE_FEATURES)
- add missing recipes: digiapix, cryptochip
- re-order them alphabetically.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the migration from dey-2.2 to dey-2.4, now it is mandatory to include
all required applications for compilation. This fixes the next error:
| make: pkg-config: Command not found
| main.c:20:10: fatal error: cryptoauthlib.h: No such file or directory
| #include <cryptoauthlib.h>
https://jira.digi.com/browse/DEL-5710
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The MACHINE_EXTRA_RRECOMMENDS for the ccimx6ul in meta-digi-arm contains
cryptoauthlib. If we want to use meta-digi-arm as a standalone BSP layer
we need to move the cryptoauthlib recipe to meta-digi-arm, that or not make it
a machine dependency.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Bash v4.4 or higher warns when discarding NULL bytes in command substitution
output. Remove these bytes to avoid the undesired warnings.
https://jira.digi.com/browse/DEL-5588
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This fixes the following warning:
WARNING: auto-serial-console-0.1-r0 do_populate_lic:
${COREBASE}/LICENSE is not a valid license file, please use
'${COMMON_LICENSE_DIR}/MIT' for a MIT License file in LIC_FILES_CHKSUM.
This will become an error in the future.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
These udev rules allow to use the digiapix API by a normal user that
belongs to the 'digiapix' group.
https://jira.digi.com/browse/DEL-5232
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit modifies sysinfo tool to use the kernel symlinks for
the devices instead of using the full node path and maintain
compatibility with different kernel versions.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These examples show how to use the Digi APIX.
https://jira.digi.com/browse/DEL-5097
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This commit adds the some platform board files and removes
the symbolic link to libsoc.conf
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-5096
This library will provide a common API to access Digi hardware interfaces and/or
other features.
https://jira.digi.com/browse/DEL-4979
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Turns out that the busybox' fdisk applet is also able to parse the GPT
partition tables. This saves around 0.5 MiB of space.
https://jira.digi.com/browse/DEL-4565
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name of the repository in Github is fixed, because it is a fork from
the original repository.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
If the IOExpander is not programmed but the kernel is running its driver,
the following messages will appear when running sysinfo:
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/hw_version': No such file or directory
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/fw_version': No such file or directory
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Rename the class so it's not specific to the C version of the AWS IoT
Device SDK, and can be used for anything related with AWS IOT (for
example Greengrass).
https://jira.digi.com/browse/DEL-4274
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This avoids the following errors:
ERROR: dey-examples-opengles-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary
and when cleaning:
ERROR: dey-examples-opengles-1.0-r0 do_configure: oe_runmake failed
| make: *** No rule to make target 'clean'. Stop.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This recipe allows to generate the swu update package to be used with SWUpdate.
The package can be generated using:
bitbake dey-image-aws-swu
https://jira.digi.com/browse/DEL-4304
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The fix in 0ae172613a wrongly printed
a new line after each value, wich resulted in the following output for a
command like this, that reads two 32-bit words:
root@ccimx6ulsbc:~# memwatch -r -l 8 -w -a 0x2008008
0x02008008: 0x0070e501
0x00000100
Instead, it should print a line feed after every 16 bytes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit updates the spidev_test application from Linux kernel upstream
at /tools/spi/spidev_test.c adding support to new features
commit: 9006a7b3220e7293ef8bc1ac9bba6c54411051c1
https://jira.digi.com/browse/DEL-4358
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
* Create the certificates directory before copying files into it.
* Give the downloaded tarball a meaningful name (otherwise tarballs
downloaded from GitHub don't have a proper name (only the version) and
may collide with other packages with the same version.
* Allow to create certs package if certs are available at build time.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the event is already signaled, read the timestamp, log and ack the event,
perform actions and exit. If it is already acknowledged, then do nothing.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
Only copy the certificates to the image if they are provided and exists.
https://jira.digi.com/browse/DEL-4339
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit moves awsiotsdk-c recipe into 'recipes-aws' and awsiotsdk-demo into
'recipes-digi/dey-examples'.
https://jira.digi.com/browse/DEL-4339
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This argument now is only valid for the behavior of the comparator in
sleep mode, so it no longer makes sense in this application.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
This library adds support to use the Atmel CryptoAuth device available
in the ConnectCore 6UL.
https://jira.digi.com/browse/DEL-4284
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
When not enough arguments are given (this includes using only the '-h'
argument for help), show the complete help.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The new line should be printed after the result, instead of before.
Example:
root@ccimx6sbc:~# memwatch -r -w -a 0x2190034
0x02190034: 0x00000000 root@ccimx6sbc:~#
After this patch:
root@ccimx6sbc:~# memwatch -r -w -a 0x2190034
0x02190034: 0x00000000
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This application tests the MCA comparator feature by configuring
the thresholds, sample rate and other parameters.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/CC6UL-600
This patch modifies the code of some of the provided samples to be able to run
them in our platforms. By default, these applications cannot find the
certificates in the device, and the command line options are not working.
Patched samples:
* shadow_sample
* shadow_sample_console_echo
* subscribe_publish_sample
See https://github.com/aws/aws-iot-device-sdk-embedded-C.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Variable 'AWS_IOT_LOGGING_LEVEL' can be used from the project 'local.conf' to
establish the logging level of the AWS IoT Device SDK.
There are 6 incremental levels: none, error, warn, info, debug, and trace.
Default is 'debug'.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The AWS IoT device SDK for embedded C is a collection of C source files that
can be used in embedded applications to securely connect to the AWS IoT
platform.
The SDK code is available in GitHub and includes the library code and several
sample applications.
A user must provide from its 'local.conf':
* AWS_IOT_CERTS_DIR: Absolute path to the directories where the required
certifies are stored:
* Root CA.
* Device signed certificate.
* Device private key.
And optionally, values for the rest of variables defined in the 'awsiotsdk-c'
bbclass.
This recipe is building the library code and the binaries for the samples:
* shadow_sample
* shadow_sample_console_echo
* subscribe_publish_sample
See https://github.com/aws/aws-iot-device-sdk-embedded-C.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Sysinfo was showing error messages if the working directory contains any file
with .log extension.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
We have introduced new default configuration files for wireless that do
not show on sysinfo, so add them if they exist.
https://jira.digi.com/browse/DEL-3974
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
- Some Python modules are no longer available in DEY-2.2 since
the official supported Python version is now 3. This caused the
HDP application to fail importing some of the old modules. For this
reason the sample application has been updated to use Python3
syntax and modules.
https://jira.digi.com/browse/DEL-3996
Signed-off-by: David Escalona <david.escalona@digi.com>
Print the HW and FW versions for the I/O Expander in the CC6UL SBC platform.
https://jira.digi.com/browse/DEL-3958
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Trying to set the complete SWU packages signature key in the
TrustFence class was causing a build error when keys were not
yet generated. To avoid this, set only the key wildcard in the
TrustFence class and expand the variable in the SWU packages
recipes, when keys already exist.
https://jira.digi.com/browse/DEL-3913
Signed-off-by: David Escalona <david.escalona@digi.com>
For CC6UL, when not using rootfs encryption, the "enc" flag must be removed from
the "mtdparts" U-Boot variable.
https://jira.digi.com/browse/DEL-3685
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Software update recipes ('core-image-base-swu' and 'dey-image-qt-swu') are able
to set default or customized values for:
* In the CC6, the proper path for:
* linux partition (default to '/dev/mmcblk0p1')
* rootfs partition (default to '/dev/mmcblk0p3' if no encrypted, always
'/dev/mapper/cryptroot' otherwise)
* In the CC6UL, the proper volume name for
* linux partition (default to 'linux')
* rootfs partition (default to 'rootfs')
https://jira.digi.com/browse/DEL-3666https://jira.digi.com/browse/DEL-3686
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
- Enabled signing support while generating the swupdate
packages for 'core-image-base' and 'dey-image-qt'. The
signing support is only enabled when 'TUSTFENCE_SIGN=1'
and requires the recipe to set the private key that will
be used to generate the signature.
- Enabled hash support while generating the swupdate
packages for 'core-image-base' and 'dey-image-qt'. The
hash support requires the sw-description files to include
a new line for each image and/or file that will be added
to the update package. The hash is automatically calculated
and replaced in the sw-description files.
https://jira.digi.com/browse/DEL-3774
Signed-off-by: David Escalona <david.escalona@digi.com>
The LICENSE is added through the packagegroup bbclass and the checksums
were outdated making the build fail with:
The LIC_FILES_CHKSUM does not match for poky/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the moment the cloudconnector is provided only as static library, so
the recipe can be simplified.
https://jira.digi.com/browse/DEL-3523
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These examples can be used to test Device Cloud functionality. There are three
test applications available:
* device_request_listener: Listen for requests from the Device Cloud
* upload_data_points: Upload test data points to the Device Cloud
* upload_file: Uploads the contents of a file as binary data points
https://jira.digi.com/browse/DEL-3305https://jira.digi.com/browse/DEL-3309https://jira.digi.com/browse/DEL-3397
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This avoids the certificate package being generated according to Debian
rules (libcloudconnector-cert).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These recipes allow to generate the .swu update packages to be used with
SWUpdate. The packages can be generated using:
bitbake dey-image-qt-swu
bitbake core-image-base-swu
https://jira.digi.com/browse/DEL-3272
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
https://jira.digi.com/browse/DEL-3195
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The OTP word read was incorrect. HW_OCOTP_CFG5 corresponds to bank 0 word 6.
https://jira.digi.com/browse/ADK4A-1129
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Print the wireless configuration as well as supplicant and hostapd version info
https://jira.digi.com/browse/DEL-3147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows to correctly read the U-Boot version when using encrypted images.
Leave the current implementation as a fallback, in case the system is using an
old U-Boot which does not populate the device tree property.
https://jira.digi.com/browse/DEL-3025
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Extend the report with more details about:
- memory usage
- all network ports (-a) with their related PIDs (-p)
- network link details (to determine if interface is up)
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The following utilities are supposed to be available on the environment's
PATH:
uptime, uname, cat, zcat, free, ps, mount, netstat, route, ifconfig, gzip
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
sysinfo is a bash script which gathers all the relevant information
from a running system on a timestamped compressed file.
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Victor Rubio Victor.RubioTorroba@digi.com
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This support comes from meta-linaro @9f899282caa9 and adds the ability
to configure getty dynamically from the console argument in the kernel
command line.
This will make it possible to enable/disable the console dynamically as
signalled by U-Boot.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
COMPATIBLE_MACHINE is a regular expression, so we need to update the current
pattern for ccimx6 due to it will also match with ccimx6ul.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
dependences for consistency
The GPIO and ADC examples are not meant for the mx6 familiy, so make their
dependences platform dependent
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
https://jira.digi.com/browse/DEL-1698
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
(cherry picked from commit 42997de56cf3f3943518e782332effad66965b21)
Conflicts:
meta-digi-dey/recipes-digi/dey-examples/dey-examples-bt.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-btconfig.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-can.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-hdp.bb
Those packages are not machine specific, so there is no need to set
PACKAGE_ARCH to ${MACHINE_ARCH}.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now it depends on the last set capture mode which may be not compatible.
https://jira.digi.com/browse/DEL-1521
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This is now needed in yocto 1.7. Otherwise it fails with:
ERROR: Please ensure recipe packagegroup-dey-gstreamer.bb sets PACKAGE_ARCH before inherit packagegroup
ERROR: Please ensure recipe packagegroup-dey-examples.bb sets PACKAGE_ARCH before inherit packagegroup
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Start the application with a well known rotation value that works with
all the resolutions. Otherwise the rotation value is unknown because it
could have been changed in a previous run of the application.
Also in the kernel driver support was added to report EINVAL to
user-space in case the requested rotation is not supported. We use that
to not return from the 'v4l2_rotate' function without enabling again
the overlay preview.
https://jira.digi.com/browse/DEL-1068https://jira.digi.com/browse/DEL-1205
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 2f7547a1b810683b813b708ba67e53ba156a9337)
The camera/driver does not support a cropping rectangle with height and
width less than 8 pixels. Add those limits to the sanity check of the
values in the user-space test application.
https://jira.digi.com/browse/DEL-1201
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
rtc_test now can run with minutes instead of seconds resolution. This
is needed for RTCs that trigger the alarm on the minute register.
It also allows to override the default timeout from the command line.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The source has machine specific code, so it needs the machine passed
in the compiler command line.
https://jira.digi.com/browse/DEL-863
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
They conflict.
Warn the user about the problem and let they change the device tree
manually.
https://jira.digi.com/browse/DEL-840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The availability of some examples depends on the kernel version, so we
need to add the dependence to the packagegroup as well.
This allows to build two ccardimx28 projects one for kernel 2.x and the
other for 3.x sharing the state-cache. Otherwise the first project
builds correctly but the second one fails.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Arturo Buzarra
Hector Bujanda
Hector Palacios
Gabriel Valcazar
Mike Engel
Gonzalo Ruiz
Francisco Gil Martinez
Jose Diaz de Grenu
Alex Gonzalez
Isaac Hermida
Javier Viguera
Tatiana Leon
Sebastian Pastor
Alejandro Navarro
David Escalona
Pedro Perez de Heredia
Victor Rubio
Urko Nalda
Jose Diaz de Grenu de Pedro