These are clones of 'optee-programmer-uart' and
'optee-programmer-usb' defined in tf-a-stm32mp-config.inc but
do not require to have the STM32MP_DEVICETREE_PROGRAMMER_ENABLE=1
which causes build problems in U-Boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9483
This avoids the next warning when builing for STM platforms
WARNING: No recipes in default available for:
meta-digi/meta-digi-arm/recipes-kernel/kernel-modules/kernel-module-nxp-wlan_git.bbappend
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The following TF-A artifacts are deployed to subdirectories of
the image deploydir:
- arm-trusted-firmware/tf-a-<platform>-<bootconfig>.stm32
- arm-trusted-firmware/metadata-<platform>.bin
- fip/fip-<platform>-<bootconfig>.bin
- fip/fip-<platform>-ddr-<bootconfig>.bin
These binaries are not copied to the image deploy dir during
the regular do_deploy(), instead, they are deployed by script
tf_a_sysroot_populate() which is added to SYSROOT_PREPROCESS_FUNCS.
To follow this logic, change the previously wrong do_deploy:append
into a new function and append it also to SYSROOT_PREPROCESS_FUNCS,
so that it is called after the artifacts have really been deployed.
In the existing code, fix the paths and commands, which had some
errors.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9461
We apply a very similar patch to the i.MX fork of weston 12.0.4, but we never
needed this patch for stm32mp platforms because they used to have 10.0.2, which
has wl_shell support. Now that stm32mp platforms use 13.0.1, use the 12.0.4
patch as reference and adapt it so it applies and builds correctly.
This makes it possible to run the LVGL demo on the ccmp25-dvk.
https://onedigi.atlassian.net/browse/DEL-9458
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds a patch to the gcnano-driver-stm32mp recipe to address a
Kernel NULL pointer issue that occurs during uncontrolled shutdown sequences.
This issue causes an unexpected Kernel NULL pointer exception, preventing the
system from powering off.
https://onedigi.atlassian.net/browse/DEL-9449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Based on the boot schemes and sources supported for each platform, the boot
artifacts now include this information in their filenames. This commit updates
the filenames accordingly in several recipes.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates the necessary changes from the weston-init.bb recipe in
the Poky layer to resolve a rootfs installation issue with the tim-vx-tools
recipe caused by a mismatch in the permissions of the /home/weston folder.
https://onedigi.atlassian.net/browse/DEL-9419
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates a custom .bbappend to fix a deployment issue of the
final FIP artifact, where the SoC name does not match with the FIP device tree
name.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated weston recipes and synchronizes it with the
latest v13.0.1 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all unnecessary files after the integration of the latest
ST BSP, based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for
Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the outdated wayland-protocols recipe and synchronizes it
with the latest v1.33 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated gstreamer recipes and synchronizes it with the
latest v1.22.12 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the gcnano recipes integrated into meta-digi, as a new
version (v6.4.19) has been released in the latest ST BSP, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the scp-firmware recipe, as it has been integrated into the
optee-os recipe with the latest v4.0.0 from the ST BSP release. This update is
based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0
(Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated OPTEE-OS recipes and synchronizes the Digi custom
.bbappend with the latest v4.0.0 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated TF-A recipes and synchronizes the Digi custom
.bbappend with the latest v2.10 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The way tagged imx-boot images are handled in meta-freescale was changed in
commit 161f1b3e69a3cf011a50e9b742fb8c46d61e41e8. Reflect this in our recipe by
using the same overrides as uuu_bootloader_tag.bbclass to disable the
functionality
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variable was removed from the base imx-boot recipe in meta-freescale
commit c30f12b809a8cf36043b42c67dd8a11f69d9cf77, as it was never being
overridden and always had a value of "imx-boot".
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For some reason, using the '+=' operator instead of ':append' when specifying
the staticdev package's FILES, the original values are overwritten, causing all
of them to get included in the dev package instead. Since some of these files
are static libraries, this causes QA errors.
Replace the '+=' operator with ':append' to fix this.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In meta-freescale commit 4d64dde1686a017ebe2763dd7880563a6fc51b53,
compile_mx8m() was modified to account for possible configuration suffixes in
the dtb filename via the creation of a symlink. In our case, the filename is
the same as the target, causing the dtb to get replaced with a dead symlink.
For now, revert this function to how it was in the kirkstone branch of
meta-freescale to avoid this.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Check that weston-start exists before modifying it: after a recent change in
poky's weston-init recipe, this file only gets installed in non-systemd images.
Remove hardcoded systemd service path: some of the code ported from
meta-st-openstlinux assumes that the original weston-init systemd services are
installed under /lib, and it uses hardcoded paths to detect them. Yocto 5.0 now
has usrmerge enabled, so the services are installed in /usr/lib instead,
causing the check to fail. Replace the hardcoded path with its respective
variable.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9045
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since our recipes handle native builds differently, port the latest version
of the recipes from meta-freescale to our layer while keeping our
customizations. Use the same revision for all platforms.
Adapt patches for lf-6.6.23-2.0.0 release and add the "Upstream-Status" tag to
them to avoid QA errors.
For now, use the imx-boot recipe from meta-freescale, but there's a chance we
might need to port the version of the recipe in meta-imx.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe for 4.2.0.imx has been upstreamed, so merge both of our .bb files
for 4.0.0.imx and 4.2.0.imx into a single .bbappend file. Adapt our patches to
support the ccimx93 and ccimx91, and while at it, add the "Upstream-Status"
tag to them to avoid QA errors
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Back in Yocto 4.0, we applied some imx recipe changes exclusively for the
ccimx93 from meta-imx's rel_imx_6.1.55_2.2.0 tag, but now these changes have
been upstreamed in the meta-freescale scarthgap branch. Since there currently
isn't an NXP BSP based on scarthgap, make all platforms use the upstreamed
versions of the recipes, which are the same versions or newer as the ones
available in meta-imx
Remove the recipes for:
* firmware-ele-imx
* gstreamer1.0-plugins-bad
* gstreamer1.0-plugins-base
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-ugly
* gstreamer1.0
* imx-atf
* imx-boot-firmware-files
* imx-codec
* imx-g2d-samples
* imx-m33-demos
* imx-m4-demos
* imx-m7-demos
* imx-parser
* imx-pxp-g2d
* libdrm
* linux-imx-headers
* optee-test
* wayland
* wayland-protocols
* weston
* xwayland
Apply these changes:
* Remove ccimx93-exclusive changes in gstreamer1.0-meta-base
* Modify imx-gst1.0-plugin bbappend so the upstream version is used in all
platforms
* Remove imx-alsa-plugins bbappend so the upstream version is used in all
platforms
* Remove firmware-nxp-wifi bbappend since the files we need to install seem
to already be included in the meta-freescale recipe
* Remove imx-test and imx-lib bbappends since our custom changes have
already been included in the meta-freescale recipes
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The SCP firmware introduces too much verbosity (with
timestamp included) in the middle of the boot log
between the TF-A and U-Boot.
Reduce the log and remove compiler flags for errors
on unused variables (banner strings).
This removes the following messages from SCP firmware:
[ 0.000000] SCP-firmware v2.12.0-dev
[ 0.000000]
[ 0.000000] [FWK] Module initialization complete!
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ST_OPTEE_DEBUG_TRACE is set to 0 if ST_DEBUG_TRACE is set to 0.
However, on the optee source code, if ST_OPTEE_DEBUG_TRACE=0 the
log level is automatically set to 3 (INFO) resulting in a very
verbose optee log.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Hector Palacios
Isaac Hermida
Gabriel Valcazar
Arturo Buzarra
Javier Viguera
Francisco Gil