By default, our 'cloudconnector' package is installed.
This can be overriden by defining 'CLOUDCONNECTOR_PKG' in the 'local.conf'
with the custom package that includes this application.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
OPTEE_PKGS variable must have a default (empty) value to prevent bitbake
parsing errors.
This fixes a build failure for MP1 platforms where the variable was
undefined in the commit that added the support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NXP platforms that have 'optee' in the MACHINE_FEATURES, will install
optee userspace packages (ccimx8m and ccimx93 at the moment).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the overlay required to perform the BLE HCI Raw test to the
linux default images. That way, default images can be used to certify
the product.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
An official fix was added to meta-timesys in commit
ae4f6e9854361d4a6d71b6f8b87130268d990b32, so our workaround is no longer needed
This reverts commit 7a77130550.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 32dd3d59c250f916115b339c29aa4dbfe50a3235 in poky breaks i.MX platform
builds when "vigiles" is inherited. While we wait for a fix in the community,
work around this issue by setting a dummy default value in the MULTIUBI_BUILD
variable.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of changing POKY_DEFAULT_DISTRO_FEATURES, do the distro features
configuration directly in the DISTRO_FEATURES variable. Also, add a couple
of variables (MACHINE_DISTRO_FEATURES_ADD/REMOVE) that allow machines
for extra tweaking the distro features.
While on it, clean up some distro features:
- pulseaudio: already added by DISTRO_FEATURES_BACKFILL
- bluez5, splashscreen, initrd, gplv3: not used (dead code)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are other device managers (e.g. mdev) that do not understand those
udev rules, so do not install them unconditionally.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds an overlay for DVK v1 and modifies the boot script to apply it
based on the board_version variable.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Move generic IMX machine firmware to imx-digi-base.inc file. This eases
maintenance, as this file follows imx-base.inc in meta-freescale.
Still, configure platform's Digi specific firmware in each machine's
config file.
As a positive side effect, this removes the "firmware-imx-easrc-imx8mn"
firmware file from the 8M Mini, as it's only used in the 8M Nano. This
saves about 263KB.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ConnectCore 93 DVK only connects the XBee reset line (XBEE_RESET_N_GPIO) but not
the sleep request (XBEE_SLEEP_RQ_GPIO)
It also reworks the 'xbee-init' script to support empty reset
(XBEE_RESET_N_GPIO) or sleep request (XBEE_SLEEP_RQ_GPIO) values.
https://onedigi.atlassian.net/browse/DEL-8375
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
accel-video was being used only for including or not gstreamer in the
different DEY images. But then we had exceptions to include gstreamer for
machines that do not define accel-video, so just follow what the ccmp15
does, and use a generic 'gstreamer' distro feature to add 'dey-gstreamer'
support to the images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
MACHINE_GSTREAMER_1_0_PLUGIN should contain the machine-specific gstreamer
plugin to use, but not the rest of the packages to be included in the
rootfs. So clean that variable up, and add the dependent packages in the
dey-gstreamer package group.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a machine specific setting, and moving it to the machine config
allows to get rid of the recipe bbappends.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The class 'boot-artifacts.bbclass' was created to generate a
list of the bootable artifacts that must be copied from the
deploy dir to the installer ZIP file, so that the installer
has all the possible bootloader files to update any variant
of the hardware.
The class was somewhat over-engineered to produce the list,
specially for the cc8x, with the variants of SoC revision,
RAM size and width. With the arrival of ST family, it got
more complex, as the artifacts don't even come from U-Boot
recipe.
To remove complexity, this commit removes the bbclass and
moves the list to the platform config file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
meta-freescale did another merge of recipe updates that we need to follow
to prevent build failures.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the momment, Fusion support is not ready in the 5.15 kernel, so do
not add the dtb overlay.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The sdcard image generation code expects a boot artifact named after
machine's name. On the other hand, u-boot recipe creates symlinks with
the build config's name. So couple machine with build config label to
prevent a failure when building the SD card image.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Although in theory, you can use any label to name the different u-boot
build configurations, we have them coupled to machine names in the
boot-artifacts bbclass, and also in the default boot artifact filename
in the firmware installation scripts.
So fix that up for the ccimx93 in the machine config, and create the
proper symlinks in the do_deploy imx-boot recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This variable was removed from meta-st-stm32mp so we need to get rid of it
in meta-digi, too.
Reported-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8268
For this platform the bootable artifact is imx-boot based, so configure
some variables accordingly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rework the "build_uboot_scripts" to prevent changing the templates in
the WORKDIR, as those are part of the SRC_URI. Instead, change the
deployed scripts by using "sed" and redirection.
Also, removed UBOOT_HAS_FASTBOOT altogether, as there is no platform
that does not support fastboot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of overriding the whole do_compile function, just to reconfigure
u-boot for Trustfence, create a do_configure pre-function that takes care
of that. This allows the removal of duplicated code.
Also, disable the generation of u-boot environment artifacts. We are
not using them and so many u-boot artifacts in the deploy directory
are confusing.
Finally, adjust the names of the TF u-boot artifacts in the do_deploy
append function.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tatiana Leon
Javier Viguera
Isaac Hermida
Gonzalo Ruiz
Gabriel Valcazar
Hector Palacios
Arturo Buzarra
Mike Engel