Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On a CC6, the 'env default -a' command deletes the 'soc_family' variable
that is used on the U-Boot boot scripts to configure the name of the
device tree file to load.
Then if we try to boot into recovery directly (without a reset) because
the variable is not available, it fails to compose the correct name for
the fdt, and gives the error:
reading uImage--ccimx6sbc-id129.dtb
** Unable to read file uImage--ccimx6sbc-id129.dtb **
Force a reset, so the 'soc_family' variable is available again and the
correct fdt_file is loaded.
While on it, add some blank lines to the 'recovery reboot' message, so
it's easier to read.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The caam encryption check was only done from fw_env_write and fw_env_read
functions, which are not called when using the functions exported as a library.
Move the check_caam_encryption() call to fw_env_open(), which is called from
all code paths. A similar check for AES encryption cannot be moved because it
requires the AES key as an argument.
https://jira.digi.com/browse/DEL-3616
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NAND partitions may have pre-existing UBI volume information
and that will tell U-Boot to use 'ubiwrite' to keep UBI wear
leveling information instead of erasing the NAND partition
beforehand. Given that the UBI support in U-Boot is not
particularly complete and stable, and specially if the NAND
partition table has been changed, this could result into
problems during the UBI volume initialization or during the
update process. To prevent such problems it is better that
the NAND partitions are erased.
This loses the UBI wear leveling information but provides
a more reliable deployment install script.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-718
Modify patch to clean compiler warning:
warning: passing argument 1 of 'sysfs_mmcboot_set_protection' discards
'const' qualifier from pointer target type
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Implements functions to get and set variables from U-Boot's environment.
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The patch with the same name in 'meta-swupdate' fails to apply cleanly
after the patches we have done in meta-digi. So add here a version of
the patch that applies cleanly and with higher precedence in the search
path (using 'dey' distro override).
https://jira.digi.com/browse/DEL-3355
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
A corner case requires to save the environment so that the
boot command works after reset.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-681
Also change the image type of dey-image-trustfence-initramfs.
https://jira.digi.com/browse/DUB-615
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The default DEY image recipe for ccimx6ulsbc builds dey-image-qt.
The graphical backend is determined dynamically.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This patch adds the functionality to automatically detect if the enviroment
is encrypted (through the device tree). If it is, the environment is encrypted
and decrypted as required in a transparent way for the user.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
https://jira.digi.com/browse/DEL-2925
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the warning message shows the TF variable setting in the correct
syntax that they should be written in the project's local.conf
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The correct U-Boot branch to be used with dey-2.0/master is v2015.04/master, as
it contains the latest development changes (just like dey-2.0/master).
This reverts commit 728619a5bc.
After commit b0a766eafc8 in the U-Boot repository, both signed and
encrypted images will be generated. Copy both of them to the deploy folder
https://jira.digi.com/browse/DUB-642
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NXP Code signing Tool for the High Assurance Boot library is needed for
signing and encrypting different artifacts (U-Boot image, uImage, ...).
As the CST cannot be included in DEY, the user needs to download the
tarball and add it to the recipe folder.
https://jira.digi.com/browse/DUB-618
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
U-Boot environment on the CC6UL NAND is located at partition /dev/mtd1:
- original copy is located at offset 0 in the partition
- redundant copy is located 1 erase block (128K) after the original copy
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2552
At the moment there is no support for rootfs encryption for the CC6UL,
so there is not a ramdisk in the boot image. But with the initial
addition of TF support, the u-boot boot script was being on-the-fly
updated for TF regardless of the platform, making the CC6UL unable to
boot when TF was enabled.
This commit fixes the problem, by just changing the u-boot boot script
when TF is enabled only for the CC6.
https://jira.digi.com/browse/DEL-2754
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Diaz de Grenu, Jose
Alex Gonzalez
Hector Palacios
David Escalona
Isaac Hermida