User-space has been updated in meta-fsl-arm for the general availability
(GA) FSL release, so use the kernel branch with the GA support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 'v3.10/master' master branch has been updated with the latest
general availability (GA) release from FSL, but the user-space is not
ready yet, so using the new kernel the build is broken:
imx-lib: error: 'PXP_IOC_GET_CHAN' undeclared
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Needing to set the branch where a specific SHA1 revision is contained is
a unnecessary constraint that can be bypassed setting 'nobranch=1' in
the SRC_URI.
We do that for all the external repos (GitHub) plus the internal ones
for the im-xbootlets and the atheros kernel module (as those two repos
are stable enough and we are not developing actively on them).
For U-Boot and Linux we keep the SRCBRANCH framework for internal repos
as this is needed for the AUTOREV yocto feature.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Starting with Yocto 1.6 there is a need to configure in which branch a
specific SHA1 revision is included. We need a framework to set such
branches both for internal git repos and for external ones (Github).
If the branch is not specified in the SRC_URI, the do_fetch task may
fail even though the SHA1 revision exists in the repository.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was broken after the upgrade to Yocto 1.6 because the framework to
generate images in Yocto 1.6 changed.
https://jira.digi.com/browse/DEL-1032
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default EMMC boot partition is locked. This prevents fw_setenv
utility to configure the u-boot environment from Linux.
This commit adds a patch that unlocks the EMMC boot partition just
before writing into it and then locks it again once the environment is
written.
https://jira.digi.com/browse/DEL-1021
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The setlocalversion script in u-boot 2009.08 did not have the
'--save-scmversion' parameter so the build was failing.
But for that version the whole do_compile_prepend can be removed because
it's not needed at all.
While on it, update the revisions for versions 2009.08 and 2013.01 to
include a fix done in 'setlocalversion' script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise building Yocto 1.6 for ccardimx28js fails with:
ERROR: Logfile of failure stored in:
/home/jviguera/projects/yocto/master/gui/ccardimx28js/tmp/work/ccardimx28js-dey-linux-gnueabi/kernel-module-atheros/1.0-r1/temp/log.do_fetch.38442
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fix an error building 'nvram' for ccardimx28js:
ERROR: Fetcher failure: Unable to find revision ... in branch master even from
upstream
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This cleans following warning:
Use of PRINC is deprecated.
The PR server should be used to automatically increment the PR.
See: https://wiki.yoctoproject.org/wiki/PR_Service
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The boot partions name has been changed in u-boot, so change it also
here to match current u-boot.
https://jira.digi.com/browse/DEL-949
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Building u-boot with Yocto does not show the version string in the
u-boot header. This is due to how Yocto compiles u-boot. It creates a
.scmversion file which may contain LOCALVERSION strings but in our case
it's empty. Later at build time u-boot's setlocalversion script detects
that file exists and exits with no further action (because it assumes
the file contains the version string).
https://jira.digi.com/browse/DEL-1007
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Fetch the source from the dey-1.6/maint branch which contains a fix
for a kernel oops introduced by the Yocto GCC 4.8.1 compiler.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The build was failing in our Jenkins server (Debian 6) with:
error: 'MS_PRIVATE' undeclared
error: 'MS_REC' undeclared
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The way to create rootfs images has changed in poky master. The whole
process has been reworked in python and the hook to create a new image
is the IMAGE_CMD variable. The old 'runimagecmd' shell function has
been deleted so we cannot override it in our custom class.
https://jira.digi.com/browse/DEL-996
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This workaround is not needed anymore as the git fetcher bug is fixed in
poky's master branch.
This reverts commit 982af63902.
https://jira.digi.com/browse/DEL-996
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently Vivante does not provide a valid GL API so Xorg fails to link
against it, we cannot workaround it easily in newer Xorg version so
instead of maintaining a pile of patches for it we use 1.14.4 version
as an interim solution.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
PR was based on meta-fsl-arm's 'linux-imx.inc' INC_PR, but this was
removed after Dora, so we need to remove PR from our kernel recipes to
avoid a bitbake parser error:
${INC_PR}.0/git')} exception SyntaxError: EOL while scanning string literal
https://jira.digi.com/browse/DEL-996
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
linux-dey.inc is a copy of meta-fsl-arm's linux-imx recipe file, so
instead of copying the whole recipe just use that (including the file)
and code the differences.
While on it, add RDEPENDS_kernel-base="" to remove the dependence of the
rootfs image recipes on the linux image. We don't need/use the kernel
image in the rootfs as we load it from a different partition. This makes
rootfs images a bit smaller.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was added to fix [DEL-898] but it is no longer needed after the
underlying changes in the rootfs hierarchy (added '/run' mountpoint)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These files were needed in previous versions of Yocto to overcome
different problems. Remove them as the default ones in current Yocto
version are good enough for our platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Provides fw_printenv/fw_setenv utilities to read/write the u-boot
environment from Linux.
https://jira.digi.com/browse/DEL-800
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
change the directory (cd) and make the symbolic link in a subshell to
preserve the current working directory for any subsequent command.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We have all the kernels configured with DEVTMPFS support, so there is
no need to have static nodes in the image files. They are not used at
runtime because a TMPFS is mounted at '/dev'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment this image is a VFAT file system containing the kernel
and the device tree blobs.
https://jira.digi.com/browse/DEL-932
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is now used in both ccimx6adpt and ccardimx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
bitbake git's fetcher uses 'ls-remote' to get the branch revision to
checkout. If the repository has two branches ending equally the 'git
ls-remote' just picks the first one regardless of that being the correct
one.
In our case we were bitten by this bug because our git repo has:
...sha1-revision... refs/heads/android/v3.10/master
...sha1-revision... refs/heads/v3.10/master
and the fetcher was using the android branch instead of linux's
v3.10/master.
A patch has been sent upstream but while that gets applied to Dora
maintenance branch the workaround here is to set the absolute path in
the kernel's bitbake recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Previously jffs2 images flashed from u-boot were not booting Linux. The
kernel was unable to mount the rootfs.
There have been some patches lately in the kernel that fix this problem,
so build jffs2 images.
Nevertheless the default image type is still ubifs when using linux 3.x.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLE variable has been deprecated in poky. The new
SERIAL_CONSOLES allows to configure multiple devices.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The do_update_dts function was hardcoded for ccardimx28js. We need to
make it mxs specific so the recipe can be used for other platforms that
do not share the same device tree configuration (for example the
upcoming ccimx6js)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Formfactor config files are needed in now so the touchscreen calibration
is loaded on target's boot. Otherwise the touch is not calibrated.
https://jira.digi.com/browse/DEL-910
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bbappend only has a patch that does not apply anymore to the new
version of the package upstream (11.09.02).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
To be sure the 'cfg80211' module is settled down before the
'ath6kl_sdio' module tries to use it.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Version v3.4p6 seems to have some problems with WEP encription. Version
v3.4p4 seems to work better with WEP, so revert to that version.
https://jira.digi.com/browse/DEL-843
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There seems to be a race condition in the load of the 'cfg80211' and
'ath6kl_sdio' modules. If we try to load the atheros module before the
cfg80211 is settled down, the driver crash.
The workaround is just separate the load of both modules in two separate
'modprobe' commands and add a small delay between them.
https://jira.digi.com/browse/DEL-814
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not well supported yet and cleans a debug line:
ath6kl: ath6kl_cfg80211_connect: sme->mfp = 0
https://jira.digi.com/browse/DEL-815
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The Linux kernel revision was splitted from main bitbake recipe to its
own linux-dey-rev file so that file could be used for linux-headers
recipe to build the toolchain using custom kernel headers (from our
repository).
That is not the recommended way to build a toolchain:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=babbf7a46acaefd9b36031483cafce053f607e66
and we are not using our kernel headers to build the toolchain anymore,
so just melt the linux-dey-rev files into the linux-dey bitbake recipes
for cleanness and easier maintenance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The wireless module occasionally fails to load in kernel v3.10.
If that is the case, unload the driver and load it again (up to
five retries).
Notes:
- Only the ath6kl_sdio module needs to be unloaded and reloaded.
- The chip is not issued a power cycle via CHIP_PWD_L because
this demonstrated to cause failure, instead of improving
behaviour.
- The 2-seconds sleep after unloading the driver is a security
measure to avoid other problems seen during test cycle.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-820
Committed a patch in linux-dey repo to fix perf build. At the same
time update linux-dey revision to get the perf fix.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was supported in kernel 2.6.35 (FSL release) but not in community
kernel 3.10
https://jira.digi.com/browse/DEL-839
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the BOARD selection out of the bootlets recipe so it can be used
from machines defined in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the IMX udev rules can be used without meta-digi-dey layer. For
example when building core-image-minimal with poky distro.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the flash parameters to the machine configuration files so it's
easier to create derivative machines and use the image bbclass to create
flash images.
(based on a patch from Seth Bollinger <sethb@digi.com>)
https://jira.digi.com/browse/DEL-682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
They conflict.
Warn the user about the problem and let they change the device tree
manually.
https://jira.digi.com/browse/DEL-840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
list.h: In function 'INIT_HLIST_NODE':
list.h:582:12: error: 'NULL' undeclared (first use in this function)
list.h: In function 'hlist_move_list':
list.h:661:15: error: 'NULL' undeclared (first use in this function)
list.h: In function 'hlist_move_list':
list.h:661:15: error: 'NULL' undeclared (first use in this function)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
To avoid conflicts between the two flavous (X11, framebuffer). Also fix
bitbake parsing error in the buildserver:
ERROR: Nothing PROVIDES 'virtual/libx11' (but
amd-gpu-x11-bin-mx51_11.09.01.bb DEPENDS on or otherwise requires it)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use a variable to select GPU flavour (X11, framebuffer).
No functionality change, just coding style.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version does not properly work with v3.10 kernel, while
the newer version 3.0.35-4.1.0 does work for old and new
kernels.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
This set of patches are forward port of patches for old version
10.12.01 and to make it work with v3.10 kernel.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
Those boolean helper variables can be used in different recipes so move
them to a common place.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment our kernel 3.10 on ccardimx28js does not support jffs2
images, so do not build them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also change the default ccardimx28js variant to 'web1' (wireless, second
ethernet, bluetooth and 1-wire)
https://jira.digi.com/browse/DEL-819
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is still a runtime-recommend of udev package so it gets installed
in udev based images (graphical) and not installed in mdev based images
(minimal).
https://jira.digi.com/browse/DEL-825
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Most SRC_URI defaults to DIGI_LOG_GIT. This patch sets a more generic
name (DIGI_GIT) that defaults to DIGI_LOG_GIT, but is configurable by
someone who might want to tune it (DIGI_MTK_GIT, etc.).
Signed-off-by: Seth Bollinger <sethb@digi.com>
New kernels don't get CPU information from U-Boot ATAGS and
so the /proc/cpuinfo file does not have the Hardware/Revision
lines filled in.
This patch gets the CPU model from the device tree information
at /proc/device-tree/compatible.
For backwards compatibility, if the CPU model cannot be retrieved
from this file, we try to get it from /proc/cpuinfo.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
In ccardimx28 depending on the kernel version the console is on 'ttyAM0'
or 'ttyAMA0'. Use the standard serial port name ttyS0 for login (through
inittab) and let the device handlers create the symlink to the correct
device.
This allows to boot the same rootfs regardless of the kernel version.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wmiconfig is Atheros proprietary code so the recipe builds from source
if DIGI_INTERNAL_GIT is defined or uses a prebuilt binary otherwise.
https://jira.digi.com/browse/DEL-640
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We are now using yocto kernel headers (3.x) in the toolchain so the
patches need to be applied regardless of the version of the running
kernel.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
To get the latest changes: logo, mac-address, wireless...
Also synchronize the defconfig with the one in the kernel tree.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The machine variant is most specific than machine name.
Before: MACHINEOVERRIDES="armv5:mxs:wb:ccardimx28js"
After: MACHINEOVERRIDES="armv5:mxs:ccardimx28js:wb"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If people are creating derivative machines in their layer, make
COMPATIBLE_MACHINE more flexible. Use SOC_FAMILY instead of specific
machine types. This allows users to more easily share these recipes.
https://jira.digi.com/browse/DEL-676
Signed-off-by: Seth Bollinger <sethb@digi.com>
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Modify the atheros and bluetooth init scripts to fetch the hwid details
from the device tree.
https://jira.digi.com/browse/DEL-572
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Similar commit was done in DEL.
Japanese law limits the maximum transmit power for Bluetooth to 3 mW.
The cert field in OTP will be set to 2 when units are manufactured
for Japan.
Updated the bluez init script to configure Bluetooth for class 2
operation if the cert field is set to 2, and to delete the class 1
configuration file since it would be illegal to use it in Japan.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In Linux 2.6.35, the kernel module accepting the parameters on load
was 'ath6kl_sdio' while in 3.10 is 'ath6kl_core'.
So we need to apply the load parameters to either module depending on
the kernel version.
This is solved by configuring the modprobe configuration file
'/etc/modprobe.d/atheros.conf' with the parameters to the correct
module instead of passing them in the command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With the old version of the kernel (2.6.35) we build an external atheros
kernel module, while with the new kernel (3.10) the atheros driver is
included with the kernel sources.
However, the new driver needs the firmware files and the driver load
scripts that are stored with the old driver.
So put a dependence on kernel-module-atheros regardless of the kernel
version and then rework the kernel-module-atheros recipe to build the
whole driver for the old kernel or only the firmware for the new kernel.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The UBOOT_LOADADDRESS and UBOOT_ENTRYPOINT variables are only used in
the kernel recipe, so remove from the machine configuration files.
Also, use the defconfig from the kernel tree which compiles all the
support by default and expects the device tree to be configured with
the desired support. Hence, remove all the empty configuration fragments
files.
https://jira.digi.com/browse/DEL-577
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
move ccardimx28js specific patch under PN-PV subdirectory. Otherwise it
fails to find the patch (this version of yocto restricts the FILESPATH
where to look for files)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ERROR: Fetcher failure: Unable to find file file://atheros anywhere
The FILESPATH variable (used as the search path for files referred to
in SRC_URI) is now (dylan) more restrictive, so move the files where
they can be found.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The build was failing for any IMX platform because it was trying to
build a bootstream u-boot.
The u-boot variables (UBOOT_*) used by yocto were incorrectly set,
so I reworked and simplified them to fix the bug and ease maintenance.
https://jira.digi.com/browse/DEL-562
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
QA Issue: Variable ALLOW_EMPTY is set as not being package specific
QA Issue: Variable RPROVIDES is set as not being package specific
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is to work as in previous kernels. For now the fragments are empty
and they will have to be individually included and tested.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Copy including folders. This was causing problems in kernel version 3.10
as the directory included folders that were omitted in the copy and caused
the do_install to fail.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Remove support that is to be added as a config fragment:
- FB support.
- LCD backlight.
- Sound.
Add configuration that was also enabled in previous kernels.
- Serial, ethernet and storage USB gadgets.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The 2.6.35.14 kernel calls the serial device ttyAM0 while the 3.10 which
uses a different driver calls it ttyAMA0.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
We need separate linux-libc-recipes if we want to support different
kernels.
On the 1.4 meta-fsl-arm layer this recipe will disappear, so review then.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Placing all of the revision info in a common include we avoid the common
issue of forgetting to update the linux-libc-headers append recipe when
the kernel is updated.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The external repositories have been cleaned up and commits have been
squashed so the sha1s need to be updated.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The public branches of those repositories have been cleaned up so
the external sha1s have changed.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The final product will be called "Digi Embedded for Yocto" or DEY for
short.
This commit renames all relevant files.
https://jira.digi.com/browse/DEL-474
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This lowers the maintenance of these layers. The manifest used with repo
deals with the specific sha1s.
https://jira.digi.com/browse/DEL-495
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This is the FTP site where the release artifacts will be placed. It's
structure will be something like:
x.y.z/
source
images
toolchains
adt-installer
https://jira.digi.com/browse/DEL-473
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Alex Gonzalez
Javier Viguera
Hector Palacios
Seth Bollinger