This commit re-adds the imx-gpu-g2d recipe that was removed
from the imx-gpu-viv v6 driver.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a platform dependency to remove the parts
provided by the new GPU driver and maintain the compatibility
for other platforms using previous versions.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the recipe to update the GPU driver
to the latest version.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The XBee Cellular modem is expected to be at ttymxc1 on CC6UL and
at ttymxc4 on CC6. The changes are needed because in v4.9.11 kernel
the /sys/devices entry for CC6UL and CC6 are the same for the TTYs,
causing that on CC6UL ModemManager was also searching for modems on
ttymxc4.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5163
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit modifies sysinfo tool to use the kernel symlinks for
the devices instead of using the full node path and maintain
compatibility with different kernel versions.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The experimental flag is needed to run the GATT server application.
https://jira.digi.com/browse/DEL-5023
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
These examples show how to use the Digi APIX.
https://jira.digi.com/browse/DEL-5097
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This commit adds the some platform board files and removes
the symbolic link to libsoc.conf
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-5096
This commit enables the IPV6 support that is necessary for the
XBee Cellular LTE Cat1 modem.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-4839
This commit creates a new file called 'dey-version-${REAL_MULTIMACH_TARGET_SYS}'
(for example, 'dey-version-cortexa7hf-neon-dey-linux-gnueabi') at the same level
as 'version-${REAL_MULTIMACH_TARGET_SYS}',
'site-config-${REAL_MULTIMACH_TARGET_SYS}', and
'environment-setup-${REAL_MULTIMACH_TARGET_SYS}' files.
The file contains the following parameters:
* Machine. The name of the platform the toolchain was built for (ccimx6sbc,
ccimx6ulsbc, ccimx6ulstarter).
* Version: A versioning system for the generated toolchains. Currently is the
distro version followed by the timestamp on which the current build started.
* Image: The name of the image that triggered the population of the SDK
(core-image-base, dey-image-aws, dey-image-qt-${GRAPHICAL_BACKEND})
The purpose of the 'dey-version-*' file is to be parsed by Eclipse so toolchains
can be autodetected.
This file is packaged with the rest of SDK/toolchain resources ('version-*',
'site-config-*', and 'environment-setup-*' files, and 'sysroots' directory)
when creating the SDK tarball and later the installation script.
The 'dey-version-*' file could also be created in a 'meta-environment.bbappend'
appending to the 'create_sdk_files()'. But from this recipe there is no access
to the name of the image that triggers the creation of the SDK (core-image-base,
dey-image-aws, dey-image-qt, etc.).
Currently, we are redefining 'SDK_POSTPROCESS_COMMAND' (from
'poky/meta/classes/populate_sdk_base.bbclass') to insert the generation of the
'dey-version-*' file just before creating the SDK tarball.
https://jira.digi.com/browse/DEL-5074
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
NM launches 'dnsmasq' using DBus, so enable DBus support at compile
time. Also remove the symlinks in the different runlevels, so it's not
launched by the included bootscript.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed in the context of network failover, so when one physical
interface is lost, you can still resolve the connectivity-check URL
using the local DNS cache.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The implemented patch fails when NetworkManager uses a local DNS cache
underneath (like 'dnsmasq'). To access the local DNS cache it needs to
use the loopback interface and hardcoding the physical interfaces make
the connectivity check fail.
This reverts commit c9b02d6288.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the same interface that it's being checked for the DNS resolution.
This makes connectivity check work in an scenario where the primary
interface has lost connectivity (for example ethernet) but you still
have connectivity through a secondary interface (e.g. wireless).
What happens in that case is that even though you have correct
connectivity in the secondary interface the check fails because it does
not use that secondary interface to resolve the name of the test URL.
The result is that the connectivity check assumes that this secondary
interface is also failing and it penalizes the metrics in the routing
table.
This commit uses libcurl's CURLOPT_DNS_INTERFACE to set the DNS
interface. Notice that this requires 'libcurl' to be compiled with
'--enable-ares'.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is required to use '--dns-interface' runtime parameter to instruct
'curl' to use a specific interface for DNS resolution.
We need this in the context of the network failover support, where
NetworkManager does the connectivity check, by trying to connect to a
configured URL through the different interfaces available, and for this
check it uses 'libcurl' underneath.
If you try to use this functionality without this build time option
enabled, you get:
curl: (4) A requested feature, protocol or option was not found built-in
in this libcurl due to a build-time decision.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This library will provide a common API to access Digi hardware interfaces and/or
other features.
https://jira.digi.com/browse/DEL-4979
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
If two or more targets are in the same environment, all of them will
broadcast the same SSID, which may be a problem when a client wants
to connect to a specific device.
Use the last bytes of the non-virtual wireless MAC for the name of the
SSID, a random value with no hexadecimal characters is used if the MAC
is not available.
Also drop 'wpa2aes' from the SSID.
https://jira.digi.com/browse/DEL-4129
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Turns out that the busybox' fdisk applet is also able to parse the GPT
partition tables. This saves around 0.5 MiB of space.
https://jira.digi.com/browse/DEL-4565
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
wlan1 is the interface used for SoftAP, so use that one instead. This also
matches with the 'Network bridging' chapter of the documentation.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The bridge example uses the wireless interface and it assumes that it is
initialized, so it must be placed after it.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This only affects the CC6UL, where by default now 'qtsmarthome' is
installed instead of 'qtbase-examples'.
This serves two purposes:
* Remove the 'qtbase-examples' package from the CC6UL to save space.
* Use 'qtsmarthome' as a demo of a QML application running on the CC6UL
using Qt Quick 2D Renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of having a recipe to add launchers for a bunch of applications
(most of them are not available anymore) move the qtsmarthome launcher
to the recipe that installs the package.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The demo application uses 'svg' images, so at runtime it depends on
'qtsvg-plugins' package.
Also add a patch to fix a runtime warning:
Both point size and pixel size set. Using pixel size
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an alternative software based renderer for QtQuick2
applications for hardware that doesn't have a GPU.
This is the case of the CC6UL. It does not have a GPU, so the only way
to run QML applications is using this software renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Arturo Buzarra
Jose Diaz de Grenu
Sebastian Pastor
Isaac Hermida
Francisco Gil Martinez
Mike Engel
Tatiana Leon
Javier Viguera
David Escalona