Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Instead of using a different boot script when booting from linux
and from recovery, merge them into one script that checks the
boot source.
https://jira.digi.com/browse/DEL-3836
Signed-off-by: David Escalona <david.escalona@digi.com>
Patches added in 'meta-swupdate' (backported from U-Boot) broke our
layer. We also had those patches, so remove them and make sure the
rest or our patches are applied after the ones from 'meta-swupdate'
by using an anonymous python function instead of appending to the
SRC_URI variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new calibration settings
updated with the latest certification results.
md5sums:
bdwlan30_US.bin: f2c414adb682a8cd95e72593fad7fa08
bdwlan30_World.bin: 12e2bae1a871e2a3dfa6ded0ee675c09
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Refresh the patches with GIT so they apply cleanly using "git am".
Otherwise they fail with:
Applying: openssl_helper: use /dev/urandom as seed source
error: corrupt patch at line 16
Patch failed at 0003 openssl_helper: use /dev/urandom as seed source
Applying: hab4_pki_tree.sh: usa a random password for the default PKI generation
warning: keys/hab4_pki_tree.sh has type 100755, expected 100644
Notice that they were not failing in Yocto, as it does not use "git am"
to apply patches, but it's better to have the patches correctly done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On a CC6, the 'env default -a' command deletes the 'soc_family' variable
that is used on the U-Boot boot scripts to configure the name of the
device tree file to load.
Then if we try to boot into recovery directly (without a reset) because
the variable is not available, it fails to compose the correct name for
the fdt, and gives the error:
reading uImage--ccimx6sbc-id129.dtb
** Unable to read file uImage--ccimx6sbc-id129.dtb **
Force a reset, so the 'soc_family' variable is available again and the
correct fdt_file is loaded.
While on it, add some blank lines to the 'recovery reboot' message, so
it's easier to read.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The caam encryption check was only done from fw_env_write and fw_env_read
functions, which are not called when using the functions exported as a library.
Move the check_caam_encryption() call to fw_env_open(), which is called from
all code paths. A similar check for AES encryption cannot be moved because it
requires the AES key as an argument.
https://jira.digi.com/browse/DEL-3616
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NAND partitions may have pre-existing UBI volume information
and that will tell U-Boot to use 'ubiwrite' to keep UBI wear
leveling information instead of erasing the NAND partition
beforehand. Given that the UBI support in U-Boot is not
particularly complete and stable, and specially if the NAND
partition table has been changed, this could result into
problems during the UBI volume initialization or during the
update process. To prevent such problems it is better that
the NAND partitions are erased.
This loses the UBI wear leveling information but provides
a more reliable deployment install script.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-718
Modify patch to clean compiler warning:
warning: passing argument 1 of 'sysfs_mmcboot_set_protection' discards
'const' qualifier from pointer target type
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Even though this variable is documented as unused, removing it fails
wireless regression tests.
https://jira.digi.com/browse/DEL-3501
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The following document,
JQCA61x4, QCA65x4, and QCA937x
Configuration Parameters Specification
80-Y7674-11 Rev. J
September 30, 2016
Contains a list of unused configuration arguments in page 29. This commit
removes those listed arguments that appeared on the default configuration
file to avoid confusion.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Implements functions to get and set variables from U-Boot's environment.
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These have been provided by the embedded hardware team and they are to
be used for certification testing. The calibration corresponds to the
internal antenna on the module. If using the current external antenna on the
CC6UL SBC they work fine, although they could be tweaked to improve.
The BDF files provided were generated from the original ones, by running a
test tree for output power calibration for QCA6564A-3 chip. This test
tree is called
‘FCCSP_Rome3.x_WLAN_CLPC_cal_and_WLAN_BT_Verify_Y8611-H341.xtt’ and it
belongs to the Qualcomm Design Package ‘DP25-WL420-100’.
The test tree is to be run in the QSPR software tool, part of the QDART
software tools set provided by Qualcomm.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
As discovered during certifications preparation work, calibration changes
applied only on the bdwlan30.bin file do not take effect.
Per QCA guidelines, the bdwlan30.bin and utfbd30.bin files should be the
same for the calibration changes to work.
This commit removes the current utfbd30.bin file, with an md5sum that
matches the original bdwlan30.bin file in QCA's chipcode
qca6564-le-1-0-3_qca_device repository, and creates a symbolic link to the
actual bdwlan30.bin board file used to certify Digi's module internal
antenna.
https://jira.digi.com/browse/DEL-3454
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The codec MAX98088 present on the ccimx6ulsbc only needs one
configuration file that can play and record.
The default file enables the interfaces present on the ccimx6ulsbc:
- Headphones
- Speaker
- LineOut (in stereo mode)
- LineIN-A
- MIC2
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2352
Javier Viguera
Mike Engel
Alex Gonzalez
Hector Palacios
Tatiana Leon
David Escalona
Pedro Perez de Heredia
Diaz de Grenu, Jose