With these changes we tell NM to not manage the wireless interfaces before
unloading the wireless module. This was causing some unexpected behavior that
crashed NetworkManager.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5351https://jira.digi.com/browse/DEL-4571
virtwlans script creates an additional interface on startup for QCA6564 chip.
The created interface purpose is for ap mode, so specify its type on creation.
https://jira.digi.com/browse/DEL-5290
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Turns out that the busybox' fdisk applet is also able to parse the GPT
partition tables. This saves around 0.5 MiB of space.
https://jira.digi.com/browse/DEL-4565
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
wlan1 is the interface used for SoftAP, so use that one instead. This also
matches with the 'Network bridging' chapter of the documentation.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The bridge example uses the wireless interface and it assumes that it is
initialized, so it must be placed after it.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Busybox's init enabled at build time collide with 'sysvinit' package.
This does not seem a problem when using RPM package manager, but using
IPK instead, the build is broken at image creation time:
Collected errors:
* check_data_file_clashes: Package sysvinit wants to install file <...>/rcS
But that file is already provided by package * busybox
https://jira.digi.com/browse/DEL-4573
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No applet has been enabled or disabled, just the defconfig file has been
refreshed for the current busybox version 1.24.x
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As we are using kernel's DEVTMPFS, using udev-cache on top of it does
not add much advantage. Disabling it has the extra advantage of avoiding
writing the udev-cache tarball under '/etc' (which probably won't work
on a read-only system).
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now the suspend script brings down all the wireless interfaces that are
managed by ifupdown command (in the '/etc/network/interfaces' file) and
then unloads the wireless driver.
On resume the script triggers an event so udev reloads the wireless
driver and then brings up the interfaces that were brought down on
suspend.
https://jira.digi.com/browse/DEL-4288
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the interfaces that are managed by Networkmanager
from the /etc/network/interfaces entry.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
In the recovery images we are using a custom init so we are not executing
any post-installation that is required for a correct rootfs setup, so call
all the post installation scripts from our custom init.
The package installation could be ipk, rpm or deb, so call to the
*postint folder.
Given that the recovery rootfs is a ramdisk, there is no need to remove the
post installation scripts.
https://jira.digi.com/browse/DEL-4430
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The readlink command on a real file was expanding to nothing and then
the '/etc/resolv.conf' file was not being updated with the nameservers.
With this change we only run the 'readlink' link command after checking
that the file is actually a symbolic link.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Added a post-installation script to disable the wireless interfaces on
module variants without wireless support.
This fixes following messages on boot:
wlan: driver load failure
modprobe: can't load module wlan (extra/wlan.ko): No such device
...
https://jira.digi.com/browse/DEL-3781
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This 'sed' command was used in the past, when DHCP or MANUAL was
configured in the '/etc/network/interfaces' (for cellular). This is no
longer true as we always configure the interface with a custom (manual)
script.
This was breaking the rest of interfaces when configured to use 'dhcp':
iface eth0 inet manual
umanualc_opts -S -b >/dev/null &
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recovery init checks if the configured update package exists and it is valid
before setting a new key and/or formatting the rootfs partition.
This change avoids getting non-booting devices after performing a firmware
update with a non-existing or invalid update package.
https://jira.digi.com/browse/DEL-3959
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
- The Bluetooth daemon was always executed before setting up the
hardware, generating several problems specifically in the CCIMX6SBC.
This was causing the Bluetooth driver to override the Bluetooth name
and alias, as well as avoiding any host function on Bluetooth profiles.
Only pairing and ping was working, as well as client profile sides.
- This change also fixes some issues in the CCIMX6UL platforms with the
Bluetooth daemon failing to perform several bluetoothctl operations.
https://jira.digi.com/browse/DEL-4000https://jira.digi.com/browse/DEL-4015
Signed-off-by: David Escalona <david.escalona@digi.com>
If the volume is not found, the partition cannot be wiped since it is attached.
Remove 'update' UBI device in:
* mdev automount script if volume is not found
* recovery init script before formatting 'update' partition
https://jira.digi.com/browse/DEL-3962
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit adds mdev support into the recovery ramdisk to
mount/unmount storage devices for the firmware up tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3692
udhcpc's '-n' option means 'Exit if lease is not obtained'.
We want to keep udhcp client alive if lease is not obtained, so when it is
possible, an IP is assigned.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
udhcpc options added to 'network/interfaces':
* '-S' to log to syslog too.
* Redirect the output to '/dev/null' not to show messages of the tool running
in background (for example when executing 'ifup').
* '&' to send the udhcp client to background.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
- Instead of trying to generate the TrustFence keys in this recipe
when they are not present, depend on the 'virtual/kernel' to
ensure they are already generated. This solves a concurrency problem
when two recipes try to generate TrustFence keys at the same time.
https://jira.digi.com/browse/DEL-3913
Signed-off-by: David Escalona <david.escalona@digi.com>
Allowing to boot a non-encrypted rootfs when encryption is enable is a security
hole: if an attacker can somehow write (offline) to the media, he could flash a
custom unencrypted rootfs and break into the system.
If the system is configured to use encryption, only encrypted rootfs will boot.
Trying to boot a non-encrypted rootfs will fail and power off the device.
https://jira.digi.com/browse/DEL-3829
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The recovery ramdisk already contains functionality for encrypted rootfs
installation. The goal is to centralize all this functionality in the recovery
ramdisk.
https://jira.digi.com/browse/DEL-3829
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
For CC6UL, when setting a new key, an "enc" flag must be added to the rootfs in
the "mtdparts" U-Boot variable.
After that a reboot is needed, so the recovery command must be modified to
remove the encryption key and proceed with the rest of commands in the next
boot.
When updating the firmware, a format of the rootfs partition is always
performed, independently if a new encryption key has just been configured.
In case only the encryption key is being configured, we also need to reboot to
format the rootfs properly.
https://jira.digi.com/browse/DEL-3685
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit verifies that the wlan1 interface is not already created
and will skip creating the virtual interface if it already exist.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3917
This commit changes the concurrent mode script to enable always the
AP interface through the wireless device but will warn the use
if the virtual MAC addresses used are the default once.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3900
The flash_eraseall busybox utility is not used in the ccimx6 and ccimx6ul
platforms. Its corresponding patch (and the library it depends on) can be
removed from the busybox recipe.
https://jira.digi.com/browse/DEL-1320
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
Sebastian Pastor
Arturo Buzarra
Isaac Hermida
Mike Engel
Tatiana Leon
Jose Diaz de Grenu
Javier Viguera
David Escalona
Gabriel Valcazar