Use ifupdown variable 'p2p-network-id' to pass a WPA supplicant network
id, to pre-populate some parameters (SSID/passphrase) when creating the
group where this device is the GO.
Also replace go_intent=7 with the auto parameter. According to the
documentation:
"auto" can be used to request wpa_supplicant to automatically
figure out whether the peer device is operating as a GO and if so,
use join-a-group operation rather than GO Negotiation.
https://jira.digi.com/browse/DEL-6741
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the error message when specific network scripts
are launched.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6728
This was reported by the build:
Some of the context lines in patches were ignored. This can lead to incorrectly applied patches.
The context lines in the patches can be updated with devtool:
devtool modify <recipe>
devtool finish --force-patch-refresh <recipe> <layer_path>
This is the result of running the above commands to have
the patches automatically updated on their context lines:
devtool modify weston
devtool finish --force-patch-refresh weston meta-digi-dey
While on it, remove also the initial "From <SHA1>" lines.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add support for greengrass 1.9.2 and remove it for 1.9.0.
Support for 1.9.0 was never released and that version is
no longer available.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The most current revision is incompatible with the v4.9 Linux UAPI. Reverting
to the previous commit of the imx-alsa-plugins repo reverts the UAPI changes
while keeping the same functionality, so use this revision for the ccimx6 and
ccimx6qp.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Latest meta-fsl-bsp-release tag 'rel_imx_4.14.98_2.1.0' replaces the
imx-alsa-plugins recipe from the meta-freescale upstream layer to fix
the build with the kernel 4.14. The commit cde60d6 ("asrc_pair: update
according to latest mxc_asrc.h") fixes the build issues.
https://jira.digi.com/browse/DEL-6732
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Trustfence is not yet fully supported for the CC8X.
Retore the warning.
This reverts commit 78534ca779.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update SRCREV and SRCBRANCH in most recipes. Update imx-gst1.0-plugin to
v4.4.7.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Change the recipe name to an older version (v6.2.4.p1.8). This is done because
there haven't been any changes in the source code since said version.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to v6.2.4.p4.2. Make sure to keep the "wayland" distro feature check
out of the recipe to be able to compile framebuffer images for the ccimx8x.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The correct recipe that need to be used is located at
meta-digi-dey/recipes-qt/demo-extrafiles/
removing all the QT applications that are not included anymore in
rootfs.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6690
This commit enables gstreamer support when built qtmultimedia. Also
sets the gstreamer plugin video source for QT.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6691
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This way, we assure that the openssl binary is included in the rootfs whenever
the base openssl package is included.
https://jira.digi.com/browse/DEL-6710
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the 'mstructure-size-boundary' flag. This flag is not supported in
ARM64 toolchains, and without it the fbtest application works fine.
https://jira.digi.com/browse/DEL-6498
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Commit c6e963f9e ("lvm2: Add RDEPEND on lvm2 to lvm2-udevrules")
in meta-oe layer added a package dependency for lvm2. This dependency
includes many unnecessary packages like lvm2, lvm2-scripts, etc.
and their dependencies that increase the size of the initramfs image.
Since lvm2-udevrules is not necessary for our initramfs image,
this commit removes the RRECOMENDS.
https://jira.digi.com/browse/DEL-6701
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 074e3ba3 ("meta-digi-dey: add cryptsetup tool into initramfs") added
the runtime dependency to cryptsetup for all platforms, but it is
required only to encrypt/decrypt block devices.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit disables file system check on the root file system when it is encrypted.
This prevents the service from failing on encrypted rootfs with the message:
[FAILED] Failed to mount /run/media/mmcblk0p3.
See 'systemctl status run-media-mmcblk0p3.mount' for details.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6655
The functionality provided by this bbappend is now available in meta-oe
upstream, commit 7f17da154372b5ec33947766783444961e8aa67c.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
After some fixes to cloudconnector, all packages compile with the standard
GCC version in Yocto Thud (gcc 8.2).
Some other packages are broken if we do not use the expected GCC version for
Thud. Specifically, this was detected trying to compile docker.
This reverts commit ddd14144c3.
The artifacts that must go inside the installer ZIP image are not anymore
the ones in UBOOT_CONFIG. For CC8X, the artifacts are combinations of
UBOOT_CONFIG and RAM_CONFIGS.
This commit adds a function 'get_bootable_artifacts()' to boot-artifacts class
to generate a new variable BOOTABLE_ARTIFACTS with the list of bootable
artifacts DEY produces.
The installer recipe can then simply iterate on that list, rather than
needing to calculate it by itself.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
A variable called IMAGE_BOOTLOADER was being used without distinction for
referring to two different things:
- the recipe that builds the bootable artifacts
- the prefix of those artifacts
The value of this is "u-boot" for most platforms, but "imx-boot" for the
CC8X based platforms.
The name of the variable is misleading, so this commit splits it into two:
- BOOTLOADER_IMAGE_RECIPE, to refer to the recipe
- UBOOT_PREFIX, to refer to the prefix of the bootable artifact
With the separation, the variable UBOOT_SYMLINK becomes a generic formed
one, so it is moved to digi-defaults.inc.
While on it, fix the image_types_digi.bbclass which was not making use of
the original variable to establish all the dependencies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit exports several internal headers and libraries
to allow link against them in user applications.
https://jira.digi.com/browse/DEL-6649
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These packages are included in ccimx6/6qp/6ul images because they are a part of
packagegroup-core-x11-sato, which isn't included in ccimx8x images. To assure
that pulseaudio always gets included in non-fb images, add it as a dependency
in packagegroup-dey-audio.
https://jira.digi.com/browse/DEL-6464
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since the original .bb file is already in the meta-digi layer, bitbake will
look inside of the bluez5-5.41 folder by default, so this line isn't needed.
https://jira.digi.com/browse/DEL-6448
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit modifies the weston ini file to support a custom
background and includes a new one with Digi branding.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Modify bluetooth init script to use kernel module to power on/off
the bluetooth chip instead of managing it directly from sysfs.
https://jira.digi.com/browse/DEL-6615
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These icons have never been included in the filesystem until a recent commit in
poky (522b0d8615cdc6645f6dc37a03ea7584f19c7bfc). In total, they take up over
1 MiB and have been causing filesystem tests to fail on the ccimx6ul due to low
space.
Add a .bbappend to undo the commit's changes in our layer.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This fixes the problem of shell console returning to the login prompt
after a successful login.
Signed-off-by: David Escalona <david.escalona@digi.com>
To avoid possible conflicts with NetworkManager, remove systemd-networkd
entirely.
https://jira.digi.com/browse/DEL-6610
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
-p : Test the standard periodic interrupts (uses timers, doesn't wake from low power)
-u : Test the standard 1 Hz interrupt (uses RTC ALARM)
-v : Test MCA periodic interrupts (uses RTC PERIODIC_IRQ)
-w : Test MCA 1 Hz interrupt (uses RTC 1HZ)
https://jira.digi.com/browse/DEL-6602
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
The Replay Protected Memory Block (RPMB) is an special storage
partition that cannot be accessed via standard block layer.
When a user space tool like blkid, tries to read it the kernel
suffers buffer I/O errors and timeouts.
This commit modifies the post installation script to filter the RPMB
partitions from the mmc block devices, to avoid multiple kernel
errors during the script execution.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed the platform dependency to apply the resize to all platforms.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Replay Protected Memory Block (RPMB) is an special storage
partition that cannot be accessed via standard block layer.
When a user space tool like blkid, tries to read it the kernel
suffers buffer I/O errors and timeouts.
This commit modifies the post installation script to filter the RPMB
partitions from the mmc block devices, to avoid multiple kernel
errors during the script execution.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed the platform dependency to apply the resize to all platforms.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe is an example for customer for a system-monitor. Scripts that
verify the system status can be added to /etc/system-monitor.d
The recovery mechanisms can be implemented on those scripts or in the
system-monitor script. The software watchdog systemd support is used to
guarantee that the system-monitor is running.
When using this it is recommended to enable the systemd hardware watchdog
support, refer to the systemd documentation for this.
The systemd service provided by this recipe is not enabled by default as it
is an example that needs customization.
https://jira.digi.com/browse/DEL-6593
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Also create the folders that contain the scripts attending each
dispatch event type.
https://jira.digi.com/browse/DEL-6575
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe is an example for customer for a system-monitor. Scripts that
verify the system status can be added to /etc/system-monitor.d
The recovery mechanisms can be implemented on those scripts or in the
system-monitor script. The software watchdog systemd support is used to
guarantee that the system-monitor is running.
When using this it is recommended to enable the systemd hardware watchdog
support, refer to the systemd documentation for this.
The systemd service provided by this recipe is not enabled by default as it
is an example that needs customization.
https://jira.digi.com/browse/DEL-6593
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Also create the folders that contain the scripts attending each
dispatch event type.
https://jira.digi.com/browse/DEL-6575
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There's a recipe in the thud branch of meta-openembedded specifically for the
opencl-headers package, but it's also provided by imx-gpu-viv. This generates
build errors when parsing the recipes and when populating the sysroot for
opencv.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Make our vulkan sub-folder match NXP's by updating recipes, deleting ones that
are no longer needed and adding new ones. Also, stop forcing 1.0.65% as the
preferred vulkan version.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
The code revision is exactly the same as the one in v6.2.4.p2.3, so simply
rename the recipe and delete files that are not necessary anymore.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Instead of having one common .inc file and one .bb file per architecture,
we now have one common .bb file for both architectures.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The watchdog and ADC devices were not being modified to belong
to 'digiapix' group, so the examples did not run properly when
ran as a user different than root.
Reported-by: Andreas Burghart <andreas.burghart@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6581
This patch is included in the rocko and sumo branches of poky to avoid errors
when starting an xserver using DRI, but it was removed in the thud branch in
favor of newer input methods other than SIGIO. SIGIO is still supported, but
not explicitly in the xserver configuration.
Since the vivante driver on the i.MX6 is using DRI and, by extension, SIGIO
(even though there is no way to configure xserver to enable SIGIO support), the
only way to make xserver start correctly is by removing the SIGIO support check
in the code.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Even though systemd support is not yet available for these platforms, add the
scripts so bitbake doesn't fail when building the busybox package.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* Use the same operation order when resuming interfaces
* Remove unnecessary delay in ccimx6sbc standby script
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, bitbake will try building the aarch64 version of the package and
fail when building ccimx6 images.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Javier Viguera
Mike Engel
Hector Palacios
Francisco Gil
Gabriel Valcazar
Arturo Buzarra
Jose Diaz de Grenu
David Escalona
Hector Bujanda