When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
The user can modify them in their local.conf if needed.
https://onedigi.atlassian.net/browse/DEL-8552
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).
This is the case, for example, of:
- ccmp1 (family)
- ccmp15 (SOM)
- ccmp13 (SOM)
- ccimx8m (family)
- ccimx8mm (SOM)
- ccimx8mn (SOM)
Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add the overlay required to perform the BLE HCI Raw test to the
linux default images. That way, default images can be used to certify
the product.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Instead of changing POKY_DEFAULT_DISTRO_FEATURES, do the distro features
configuration directly in the DISTRO_FEATURES variable. Also, add a couple
of variables (MACHINE_DISTRO_FEATURES_ADD/REMOVE) that allow machines
for extra tweaking the distro features.
While on it, clean up some distro features:
- pulseaudio: already added by DISTRO_FEATURES_BACKFILL
- bluez5, splashscreen, initrd, gplv3: not used (dead code)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The class 'boot-artifacts.bbclass' was created to generate a
list of the bootable artifacts that must be copied from the
deploy dir to the installer ZIP file, so that the installer
has all the possible bootloader files to update any variant
of the hardware.
The class was somewhat over-engineered to produce the list,
specially for the cc8x, with the variants of SoC revision,
RAM size and width. With the arrival of ST family, it got
more complex, as the artifacts don't even come from U-Boot
recipe.
To remove complexity, this commit removes the bbclass and
moves the list to the platform config file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This variable was removed from meta-st-stm32mp so we need to get rid of it
in meta-digi, too.
Reported-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8268
Rework the "build_uboot_scripts" to prevent changing the templates in
the WORKDIR, as those are part of the SRC_URI. Instead, change the
deployed scripts by using "sed" and redirection.
Also, removed UBOOT_HAS_FASTBOOT altogether, as there is no platform
that does not support fastboot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Francisco Gil
Mike Engel
Hector Palacios
Gonzalo Ruiz
Javier Viguera
Arturo Buzarra