Previously jffs2 images flashed from u-boot were not booting Linux. The
kernel was unable to mount the rootfs.
There have been some patches lately in the kernel that fix this problem,
so build jffs2 images.
Nevertheless the default image type is still ubifs when using linux 3.x.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLE variable has been deprecated in poky. The new
SERIAL_CONSOLES allows to configure multiple devices.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The do_update_dts function was hardcoded for ccardimx28js. We need to
make it mxs specific so the recipe can be used for other platforms that
do not share the same device tree configuration (for example the
upcoming ccimx6js)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Formfactor config files are needed in now so the touchscreen calibration
is loaded on target's boot. Otherwise the touch is not calibrated.
https://jira.digi.com/browse/DEL-910
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bbappend only has a patch that does not apply anymore to the new
version of the package upstream (11.09.02).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
To be sure the 'cfg80211' module is settled down before the
'ath6kl_sdio' module tries to use it.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Version v3.4p6 seems to have some problems with WEP encription. Version
v3.4p4 seems to work better with WEP, so revert to that version.
https://jira.digi.com/browse/DEL-843
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There seems to be a race condition in the load of the 'cfg80211' and
'ath6kl_sdio' modules. If we try to load the atheros module before the
cfg80211 is settled down, the driver crash.
The workaround is just separate the load of both modules in two separate
'modprobe' commands and add a small delay between them.
https://jira.digi.com/browse/DEL-814
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not well supported yet and cleans a debug line:
ath6kl: ath6kl_cfg80211_connect: sme->mfp = 0
https://jira.digi.com/browse/DEL-815
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The Linux kernel revision was splitted from main bitbake recipe to its
own linux-dey-rev file so that file could be used for linux-headers
recipe to build the toolchain using custom kernel headers (from our
repository).
That is not the recommended way to build a toolchain:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=babbf7a46acaefd9b36031483cafce053f607e66
and we are not using our kernel headers to build the toolchain anymore,
so just melt the linux-dey-rev files into the linux-dey bitbake recipes
for cleanness and easier maintenance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The wireless module occasionally fails to load in kernel v3.10.
If that is the case, unload the driver and load it again (up to
five retries).
Notes:
- Only the ath6kl_sdio module needs to be unloaded and reloaded.
- The chip is not issued a power cycle via CHIP_PWD_L because
this demonstrated to cause failure, instead of improving
behaviour.
- The 2-seconds sleep after unloading the driver is a security
measure to avoid other problems seen during test cycle.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-820
Committed a patch in linux-dey repo to fix perf build. At the same
time update linux-dey revision to get the perf fix.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was supported in kernel 2.6.35 (FSL release) but not in community
kernel 3.10
https://jira.digi.com/browse/DEL-839
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the BOARD selection out of the bootlets recipe so it can be used
from machines defined in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the IMX udev rules can be used without meta-digi-dey layer. For
example when building core-image-minimal with poky distro.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the flash parameters to the machine configuration files so it's
easier to create derivative machines and use the image bbclass to create
flash images.
(based on a patch from Seth Bollinger <sethb@digi.com>)
https://jira.digi.com/browse/DEL-682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
They conflict.
Warn the user about the problem and let they change the device tree
manually.
https://jira.digi.com/browse/DEL-840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
list.h: In function 'INIT_HLIST_NODE':
list.h:582:12: error: 'NULL' undeclared (first use in this function)
list.h: In function 'hlist_move_list':
list.h:661:15: error: 'NULL' undeclared (first use in this function)
list.h: In function 'hlist_move_list':
list.h:661:15: error: 'NULL' undeclared (first use in this function)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
To avoid conflicts between the two flavous (X11, framebuffer). Also fix
bitbake parsing error in the buildserver:
ERROR: Nothing PROVIDES 'virtual/libx11' (but
amd-gpu-x11-bin-mx51_11.09.01.bb DEPENDS on or otherwise requires it)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Alex Gonzalez
Javier Viguera
Hector Palacios