We no longer need logic to determine the SOM's RAM size and bus width, we only
need to know the SOC revision, which is info that is always available.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now that both U-Boot and the SCFW can autodetect the RAM configuration, we can
simplify the imx-boot build process to generate two binaries (one per SOC
revision) instead of eight. Build "flash_spl" imx-boot images and use only one
global defconfig for u-boot.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This update includes automatic RAM configuration detection, and only one SCFW
binary is needed for all ccimx8x variants. Adapt the imx-boot recipe
accordingly.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use our custom compile/install/deploy functions from DEY 3.2. NXP's imx-boot
recipe assumes only one U-Boot config and SOC revision, but we have multiple,
so we have to rewrite all of these functions.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For the ccimx8x, we changed the order of the steps in do_deploy() from:
Deploy -> Rename files -> Move binaries
To:
Deploy -> Move binaries -> Rename files
When it's time to rename the files, they won't be in their original place and
the process will fail. Make sure we move the files after they've been renamed
to avoid errors.
Also, one move operation is enough for all artifacts, so remove the second
operation.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Currenlty, the github FW version is a bit old and some functionality does not
work on latest IW61x batches.
Use this FW binary till it is released on github. This is required to
have WiFi and Bt working simultaneously.
0c6d454ea83b1a78b4e60df16f478f43 sduart_nw61x_v1.bin.se
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Backport from NXP's lf-6.1.1-1.0.0 release for the ccimx93 (meta-ml
layer).
This version of flatbuffers is needed for ethos-u-vela version 3.6.0
(backported in following commit).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are two different firmware files for Bluetooth on Murata's type2AE
module:
- JRL: It configures a Bluetooth TxPower of 7dB, to be used in Japan
only.
- FCC.CE: It configures a Bluetooth TxPower of 5dB, to be used in the
rest of the world.
To comply with the FCC requirement that it should not be possible to
configure different regulatory domains, or in this case configurations,
than FCC, only deploy the FCC.CE file by default:
- BCM4373A0_FCC.CE.hcd (md5sum: 1e287a3ab7f83e59352cb321315ea80f)
This file reports the following information during boot time:
Bluetooth: hci0: 89373 UART 37.4 MHz wlbga_BU sLNA muRata Type 2EA 5dBm 20220608-0103
Bluetooth: hci0: BCM4373A0 (001.001.025) build 0155
JRL file will be added via the Worldwide DEY patch addon that customers
can request from Digi.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The only user of 'linux-dey-src.inc' was the linux recipe itself, so
instead rename that file to a more generic 'linux-dey.inc' and include
more common code in that renamed file.
This is in preparation for the new linux 6.1.1 recipe for the ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove patch file "0001-Makefile-Suppress-array-bounds-error.patch"
for ccimx93, as it is already included in the lf-6.1.1_1.0.0 revision.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Weston is not launched in read-only filesystem because /home/root
is not a writable path.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Replace the CLM blob file from Github, which supports several countries
with a custom US-only CLM blob file. This way, default images will only
have support for US regulatory domain, therefore complying with FCC
requirements.
The Worldwide CLM blob file will be provided by Digi International on
request.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
We can't run a post installation script in a readonly file system.
We need to provide a configuration file beforehand.
https://onedigi.atlassian.net/browse/DEL-8556
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
The user can modify them in their local.conf if needed.
https://onedigi.atlassian.net/browse/DEL-8552
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When the swu package is generated it needs the right
extension of the rootfs to be formed.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
These variables are used to generate .sdcard images, and without them, said
generation will fail.
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We still need to use this downgraded version of dtc to be able to build
U-Boot v2017.03, so backport this patch to be able to build dtc with the latest
version of gcc
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit modifies the boot script condition to apply the overlay for MCA
based on HWID MCA field.
https://onedigi.atlassian.net/browse/DEL-8521
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
By default, the signing script generates a file without 'w'
permission so DEY cannot remove it from the deploy dir on
a clean operation.
Add the 'w' permission so that DEY can remove it on clean
operations and generate a new signed file when required.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, the sw-description used for non-dualboot systems will be missing
these values and the software update process will fail.
https://onedigi.atlassian.net/browse/DEL-8513
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We accidentally used "mx8mm" instead of "mx8mn" in commit
9b165196bb, which caused several elements to stop
working on the target (including the optee-os).
https://onedigi.atlassian.net/browse/DEL-8512
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Javier Viguera
Gabriel Valcazar
Isaac Hermida
Gonzalo Ruiz
Mike Engel
Francisco Gil
Arturo Buzarra
Hector Palacios