The prebuilt 'athtestcmd' binary allows you to test tx/rx of the
Wi-Fi MAC, when the driver is loaded in test mode.
This is required for certifying Wi-Fi in products, so add it by
default for the ccimx6sbc.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7444
(cherry picked from commit acb402fdcfa54d8d5519580ff7fcfb76fbed3f49)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since this feature was introduced in newer versions of U-Boot, we need
to disable it for v2017.03 to avoid several compilation issues.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update US Board Data File to use the new GOLDEN2 calibration.
The new BDF is:
- bdwlan30_US.bin (328f970444b5eaaa48c0188cea1685e3)
https://jira.digi.com/browse/CC6UL-1210
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 373b3958bad9d0c462349d89ef5832e843624b01)
This commit fixes the following warning:
WARNING: meta-digi/meta-digi-arm/recipes-bsp/trustfence-cst/trustfence-cst_3.3.1.bb:
Recipe trustfence-cst sets S variable with trailing slash '/tmp/work/aarch64-dey-linux/trustfence-cst/3.3.1-r0/cst-3.3.1/',
remove it
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This default environment is needed by packages like libubootenv.
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package has been entirely replaced with libubootenv
https://jira.digi.com/browse/DEL-7410
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a replacement for u-boot-fw-utils. Adapt the u-boot-fw-utils patches
to this new library and include the same logic as the u-boot-fw-utils recipe
(generate and install the U-Boot environment configuration file in the rootfs)
For now, remove the u-boot-default-env dependency, since the package doesn't
exist in zeus.
https://jira.digi.com/browse/DEL-7410
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The new SCFW re-enables "Read DBI deskew configuration"
setting, to support Nanya LPDDR4 chips.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/CC8X-297
Add a patch series to customize the ATF console for the ConnectCore 8M platforms,
and to disable the Cortex-M debug UART.
https://jira.digi.com/browse/DEL-7497
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update file:
- bdwlan30_US.bin (93a58f0f8e241bef6600d53d013c3cb2)
This file was generated by calibrating several v3 CC8MN SOMs and
merging their resulting BDF files into a new Golden file.
Target output powers tables and CTL tables remain intact.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
CTL limits comply with FCC, CE and TELEC certifications.
https://jira.digi.com/browse/DEL-7487
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit cceffef831edd10b017aac3006636c98f7baa0a9)
Update file:
- bdwlan30_US.bin (93a58f0f8e241bef6600d53d013c3cb2)
This file was generated by calibrating several v3 CC8MN SOMs and
merging their resulting BDF files into a new Golden file.
Target output powers tables and CTL tables remain intact.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
CTL limits comply with FCC, CE and TELEC certifications.
https://jira.digi.com/browse/DEL-7487
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit cceffef831edd10b017aac3006636c98f7baa0a9)
There's a Yocto configuration option that enables this feature in U-Boot, but
since imx-boot images are signed using the scripts in trustfence-sign-tools,
said configuration is lost and the scripts don't take it into account if it's
enabled. Make sure that the configuation carries over to the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Allow users to select Certified Bluetooth 4.1, rather than
the default not-certified Bluetooth 5, through the use of variable
BT_FW_VERSION="4"
md5sums:
nvm_tlv_3.2.bin ==> 9621f50172f2bfb4f65f8e5c6528b614
rampatch_tlv_3.2.tlv ==> 769e1fc9e5a2061bb3aaa1f32dac3804
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This overlay added cooling devices for all quad cores.
On the latest BSP, the SoC device tree include contains all four
cooling devices and the newest U-Boot is able to delete the nodes
for non-existing cores, so there's no need for this overlay
anymore.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, mkimage will delete the device trees between imx-boot builds,
causing the build to fail when generating a signed imx-boot.
https://jira.digi.com/browse/DEL-7420
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
ConnectCore 8M Mini has support to VPU but the library used is different than
the used by the i.MX6 processors. This recipe manages the required libraries
to operate with this kind of VPU.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Cortex-M4 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Mini DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Both ConnectCore 8M platforms share the same U-Boot build process,
so apply the same changes for them.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When manually changing the partition table, it could happen that
a UBI volume already exists in the 'update' partition.
If not erased, the system may find the old UBI volume (with wrong
geometry information) and try to mount it which will result in
failure.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On commit 1e5cafeb79 a fall-back
update command was introduced in case the newest command fails.
If the newest command succeeds, however, the 'test' command for
error doesn't match (there is no error) and the return code of
such test is "1". On the next check for errors, this results on
an error, when we really mean to continue because the first
command was successful.
Move the second error check inside the error path of the first
attempt.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
In order to revoke SRKs in platforms with AHAB we need to set a mask
during the signing/encryption process.
Create new TRUSTFENCE_SRK_REVOKE_MASK variable to export the
SRK_REVOKE_MASK variable required by the imx-boot signing script.
The revoke mask is not necessary for signing/encryption of other artifacts,
so set it by default to 0x0.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The 'source file system' was removed as an argument from the
'update' command in U-Boot v2020.04.
For platforms using such version, remove it from the update fw
scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-983
This command isn't essential and might not be available on all systems, so
remove it. Use the "oflag=sync" dd parameter instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Hector Palacios
Arturo Buzarra
Gonzalo Ruiz
Gabriel Valcazar
Hector Bujanda
Francisco Gil
Mike Engel