after commit 8ad093c37b we are detecting
if a model conversion fails.
Currently the mode ssd_mobilenet_v1 fails and cannot be converted by
vela.
This is reported to NXP and will be fixed in next releases.
Meanwhile, for the current version, use a local copy.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
'gplay' tries to use playbin3 and autovideosink by default
which is provided by plugins-good package and missing on the
ccimx6ul.
Add this package so that video playback works with 'gplay'
command alone.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9525
Due to a change in systemd the default home directory is now "/root".
Modify our recipes to match with this change.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
2.46.5 has an issue where the ConnectCore demo doesn't register mouse clicks
in its main window, making it unusable. Until we find the cause of this issue,
downgrade to the nearest available release 2.44.4, where mouse clicks are
working fine.
Backport a patch from 2.46.X to allow builds with the lbse PACKAGECONFIG
disabled and apply a custom patch to make sure the correct gstreamer sink is
used for the ccimx8x.
https://onedigi.atlassian.net/browse/DEL-9446https://onedigi.atlassian.net/browse/DEL-9498
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For i.MX platforms with a GPU, we already enable its driver as built-in in the
kernel, so there's no need to install the external version of the driver. This
removes one of the dependencies with the linux-imx repo, the other one being
linux-imx-headers.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now all platforms support setting the GPIO name instead of an index
as the configuration for the GPIO-enabled secure console.
Repurpose the TRUSTFENCE_GPIO_ENABLE macro to directly set the GPIO
name.
Also take the opportunity to remove TRUSTFENCE_GPIO_ENABLE and
TRUSTFENCE_CONSOLE_PASSPHRASE_ENABLE commented definitions from bbclass
and conf files, and remove a duplicated TRUSTFENCE_CONSOLE_DISABLE
definition from ccmp1.inc.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
bootcount utility started by bootcount-init script was inconditionally setting
bootcount to 0 even if the functionality is disabled.
According to documentation, bootcount functionality is only enabled if bootlimit
variable is defined to a value greater than 0 in U-Boot environment.
In platforms like cc6ul, that use MCA NVRAM to store bootcount, this was corrupting
user NVRAM.
Version increased to 1.1.
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Unify all the different bluetooth init scripts.
The service can be started as oneshot instead of forking, as in all cases
the attach command is started daemonized in background.
Regarding the service requirements, just rely on udev so the HW itself
should be detected and ready.
Make it running before the bluetooth service, so the HW Bluetooth device
is fully ready when bluetooth service starts.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
bluez5-init is a Digi custom recipe to collect the init script
needed to bring up the specific platform bluetooth hardware.
CCMP1s do not require any bluetooth init extra action.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The systemd recipe was recently upgraded from v255.13 to v255.17 in poky and
our patches no longer applied correctly. Adapt them to prevent do_patch()
errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We haven't included fbtest in our default images for a long time. Also, its
lone dependency, microwindows, is broken due to an outdated SRC_URI that no
longer exists. Remove both recipes
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe was added 8 years ago in the context of supporting awsiotsdk, back
when there were no community recipes for a v2.X.X version. meta-openembedded
now has recipes for both v3.6.2 and v2.28.9, and our recipe has been outdated
for a while now, so remove it.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Both gstreamer1.0-plugins-good-qt and imx-qtapplications haven't been
officially supported by NXP ever since they migrated to qt6 on i.MX platforms,
and both of them apply only to imxgpu3d platforms. In our case, we only use qt5
in the ccimx6ul, so we don't need these packages at all.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Like in commit 782b20958a, port these recipes from meta-imx even though they
are already available in meta-freescale, just so we can include the
modifications from meta-imx's imx-gpu-viv-6-overrides.inc.
https://onedigi.atlassian.net/browse/DEL-9445
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since the ConnectCore demo server forks execution to start the demo server
Python script, it may not be fully initialized when the ConnectCore demo
example initializes the UI and attempts to retrieve information from the server
daemon. This commit introduces a delay to ensure the server is ready before
another service, such as the ConnectCore demo example, interacts with it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe installs the dcmipp-isp-ctrl tool, an application that demonstrates
some of the features of the DCMIPP ISP blocks. It allows configuring
illuminance and auto-exposure to achieve a targeted level by adjusting both the
DCMIPP exposure block and the sensor gain.
This recipes is original from meta-st-openstlinux layer based on
openstlinux-6.6-yocto-scarthgap-mpu-v24.12.05 release.
https://onedigi.atlassian.net/browse/DEL-9486
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes several issues related to the initialization of AI demos when
using CSI cameras (OV5640 and IMX335) with the DCMIPP peripheral.
All configurations have been moved to an additional setup_camera.sh script and
removed from the main demo launcher.
https://onedigi.atlassian.net/browse/DEL-9486
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
stai-mpu provides a common ML API for stm32mpu platforms, allowing applications
to use different inference frameworks without changing any code. Its packages
consist of pre-built libraries that are in charge of interfacing with the
three supported frameworks (tflite, onnx and openvx).
While it's possible to install only a subset of these libraries to limit the
supported frameworks on the target device, all libraries are packaged
unconditionally at build-time, pulling in the dependencies of all three
frameworks. In our case, this pulls in onnxruntime dependencies even though we
only install the tflite and openvx packages in our ccmp25 images. This tends to
cause out-of-memory errors when onnxruntime is built at the same time as other
large packages, such as opencv and wpewebkit.
Since most of these dependencies are already present at a higher level in the
x-linux-ai packagegroup recipes, remove them from the stai-mpu recipe and skip
the runtime dependency QA checks to be able to build the packages without their
respective frameworks. In the case of the ccmp25-dvk, this has no effect on the
final image contents, but it prevents onnxruntime from being built for no
reason.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The default ML packagegroup provided by the x-linux-ai layer isn't very
flexible when it comes to including a subset of the packagegroups it provides:
even if you include just one of them, the others will get built anyway, pulling
in several dependencies that aren't even used for the final image's contents.
Also, a lot of the runtime dependencies are duplicated in several of the
packages in the dependency chain, making it confusing to manage dependencies
efficiently.
Create a new packagegroup specifically tailored for our ccmp25 webkit images,
using packagegroup-x-linux-ai as reference, removing any duplicated
dependencies and applying the same changes as the ones we apply in the
reference's .bbappend. At the moment, this packagegroup and the old one are
equivalent, but we can now modify ours while leaving the old one intact in case
anyone wants to use it.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
getVar() defaults to expanding by default.
See poky's commit: 2631c375b8a025ee2e4329f6d93900bb7b5dadf7
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, we don't enable wpewebkit's qtwpe config, so the qtbase-native
dependency pulled in automatically via the qt6-cmake bbclass isn't necessary.
Make sure the dependency only gets pulled in when needed.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit synchronizes the nl80211 definitions with Linux kernel v6.6.48 to
prevent a mismatch between the extended features recognized by wpa_supplicant
and to correctly parse the information provided by the Linux driver.
https://onedigi.atlassian.net/browse/DEL-9470
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Currently, this feature prevents the CPU from properly entering the
standby state on the i.MX93.
With the current implementation, the PXP module generates
"pxp-dmaengine-std" interrupts, which prevents the CPU from asserting
the PMIC_STBY_REQ signal.
An ongoing ticket with NXP is addressing this issue.
In the meantime, use the following workaround to resolve the situation.
https://onedigi.atlassian.net/browse/DEL-9356
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit fixes several issues related to the initialization of AI demos when
using a USB camera.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Using the qt5 STM customizations as reference, adapt them to qt6 by changing
filenames and paths when needed and porting the qtbase configuration options
from the v2.1.0 branch of meta-st-x-linux-qt. Make sure that the
cinematicexperience is included in packagegroup-qt6-dey.
For now, leave the STM qt5 support as-is for backwards compatibility.
https://onedigi.atlassian.net/browse/DEL-9462
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the target will immediately power off as soon as the power button is
pressed, even before letting go of it. This customization is already being made
for ccmp1 platforms, so make it common for all stm32mp platforms.
https://onedigi.atlassian.net/browse/DEL-9190
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Similar to what we did for the target's version of this packagegorup in commit
58cfee7ac7, keep the "essentials" packagegroup and remove the addons. In this
case, the troublesome qt6 package is qtinterfaceframework, which pulls in
several python3 packages including python3-cryptography, which depends on the
rust compiler.
This reduces overall SDK size and rust compiler overhead during the SDK build.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The dependency was added in the recipe for adwaita-icon-theme v3.30.1, back in
poky commit 2ad84e129652, because that version of the package required librsvg
to convert SVG files to PNG. In recent versions, this is no longer the case,
and removing the dependency has no effect on the package's contents (they are
identical with or without the dependency).
Since librsvg-native is the only package in our ccimx6ul/x11 images that
depends on rust, remove this dependency to prevent bitbake from generating
the rust compiler, reducing build overhead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This plugin is optional and, in platforms where rust isn't used anywhere else,
it adds a lot of overhead during the build process. Remove the plugin to
prevent said overhead when possible.
Alter gstreamer1.0-plugin-bad's PACKAGECONFIG from a single place so the
change applies globally (imx and stm platforms use different gstreamer recipes
and versions).
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This mirrors the change done for the STM version of the recipe in meta-digi
commit b7c15294a2, re-using the same patch that was used to fix the
compilation error introduced by poky commit 19fce77a5f13.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds a patch to address a build issue with the onnxruntime recipe
when warnings are treated as errors. The issue happens due to changes in commit
19fce77a5f132c569c555e8b6a4dda1379537653 ("gcc: Fix c++: tweak for
Wrange-loop-construct") in the poky layer.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
connectcore-demo-example multimedia content is only meant for webkit images,
and all this package does in its regular non-webkit version is add a few static
resources. Remove said resources and install only the demo's server + basic
assets.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Arturo Buzarra
Hector Palacios
Isaac Hermida
Francisco Gil
Gabriel Valcazar
Gonzalo Ruiz
Hector Bujanda
Javier Viguera