We tested all tarball compression formats supported by poky, and although bz2
has faster (de)compression time, xz is better in terms of compression ratio:
for all of the rootfs tarballs generated for our currently supported
images/platforms (15 at the moment), the xz format saves an average of 30 MiB
per tarball compared to bz2, totalling up to 450 MiB.
No extra dependencies are pulled in, since xz-native is already being pulled in
for all of our image builds, so the only drawback to this change is the
increased compression time (+7.34s on average per tarball).
https://onedigi.atlassian.net/browse/DEL-9459
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the BOOTLOADER_SEEK_OFFSER, because it has been
moved into the swupdate class and renamed into SWUPDATE_UBOOT_OFFSET.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
The user can modify them in their local.conf if needed.
https://onedigi.atlassian.net/browse/DEL-8552
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We accidentally used "mx8mm" instead of "mx8mn" in commit
9b165196bb, which caused several elements to stop
working on the target (including the optee-os).
https://onedigi.atlassian.net/browse/DEL-8512
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).
This is the case, for example, of:
- ccmp1 (family)
- ccmp15 (SOM)
- ccmp13 (SOM)
- ccimx8m (family)
- ccimx8mm (SOM)
- ccimx8mn (SOM)
Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The class 'boot-artifacts.bbclass' was created to generate a
list of the bootable artifacts that must be copied from the
deploy dir to the installer ZIP file, so that the installer
has all the possible bootloader files to update any variant
of the hardware.
The class was somewhat over-engineered to produce the list,
specially for the cc8x, with the variants of SoC revision,
RAM size and width. With the arrival of ST family, it got
more complex, as the artifacts don't even come from U-Boot
recipe.
To remove complexity, this commit removes the bbclass and
moves the list to the platform config file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For the momment, Fusion support is not ready in the 5.15 kernel, so do
not add the dtb overlay.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The sdcard image generation code expects a boot artifact named after
machine's name. On the other hand, u-boot recipe creates symlinks with
the build config's name. So couple machine with build config label to
prevent a failure when building the SD card image.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* fix arch tune files path in machine config
* update imx-digi-base config file (using as a base the imx-base.inc
config file in 'meta-freescale')
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These variables were originally set in NXP's recipes, but they moved their
definitions to each platform's configuration file. Set the appropriate values
where needed. While at it, replace every mention of the SOC_TARGET variable
with its new name, IMX_BOOT_SOC_TARGET.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
If IMAGE_FEATURE 'read-only-rootfs' is active, the rootfs image
will be SQUASHFS.
Remove other root file system images, such as ext4, ubifs, sdcard.gz
to avoid confusion and use by install scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These images are comprised of the bootloader, linux and rootfs images. Since
the rootfs images are highly compressable, we can compress the .sdcard file as
well to reduce the space taken up by build artifacts.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since these images are highly compressable, this greatly reduces the amount of
space taken up by build artifacts.
Modify the code used to generate the .sdcard and .installer.zip files so that
they contain the decompressed .ext4 image.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This overlay added cooling devices for all quad cores.
On the latest BSP, the SoC device tree include contains all four
cooling devices and the newest U-Boot is able to delete the nodes
for non-existing cores, so there's no need for this overlay
anymore.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Follow the syntax:
_ov_<som|board>_<functionality>[_<hardware>].dts
where:
_ov_ identifies the file as an overlay.
som|board identifies whether the overlay applies to the SOM
or to the carrier board.
functionality identifies the function of the overlay.
hardware identifies the hardware to which the overlay
applies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This overlay is not handled in our bootscript, but we add it to the Linux
partition in case users want to apply it manually.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Parse the hardware version from the HWID and load the overlay if and only if
the revision is "1". Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-7070
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of having two separate device trees for the non-wireless and wireless
variants of the ccimx8mn, use the non-wireless .dtb as a base and apply the
overlays in the bootscript depending on the variant's capabilities.
Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Additionally:
- The handling of gpios has been swapped so 'Set low XBEE_SLEEP_RQ' is done
before 'Power cycle XBEE_RESET_N' to assure the device doesn't enter sleep mode.
- Removed ExecStop entry from systemd service since it's doing nothing.
https://jira.digi.com/browse/DEL-6424https://jira.digi.com/browse/DEL-6423
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
The ccimx8mn console is on ttymxc0 (uart1 thanks to aliases).
https://jira.digi.com/browse/DEL-6876
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Now that xbee-init supports multiple interfaces, add the XBee Cellular
GPIOs to the already existing XBee User ones to it so it can handle both
of them on the ccimx8mn DVK.
https://jira.digi.com/browse/DEL-6887
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
WPA and P2P configuration files are basically the same between all
platforms, so we remove all duplicated files to use a common file
and modify it in the recipe logic.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gabriel Valcazar
Mike Engel
Javier Viguera
Francisco Gil
Hector Palacios
Gonzalo Ruiz
Hector Bujanda
Arturo Buzarra