Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
While at it, add the "Upstream-Status" tag to the patches to avoid QA errors
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit fixes build issues with optimization=plain.
commit: ec35091c8a358aacbf787afb2bfab6a0996031ed
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This reuses the same variable from sysvinit (USE_VT) to disable running
getty/login on virtual terminals.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The Poky layer defines a default journald conf file that allows log files on
the file system to grow to a maximum of 64 MiB. However, this size on some
platforms is impossible to address, so this commit reduces the maximum size for
runtime logs to 4 MiB.
https://onedigi.atlassian.net/browse/DEL-8419
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
(cherry picked from commit bdece7102b)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a custom config file to handle the KEY_POWER events on systemd.
https://onedigi.atlassian.net/browse/DEL-8207
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This custom config file applies not only the NXP platforms so this commit
renames it.
https://onedigi.atlassian.net/browse/DEL-8207
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some recipes were forcibly removing conflicting packages.
This does not allow to add those packages back for users that
want to use meta-digi layer, but a different distro than 'dey'.
With the 'dey' distro override, such removals are only done
if using this distro.
Reported-by: Michael Burr <michael.burr@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7712
There are some init packages from the poky layer that remain using only a SysV
init script. Systemd converts these init scripts to systemd service format on
boot and shows an ugly warning for each one. To avoid flooding the console with
this kind of messages, we reduce the verbosity of these messages.
https://onedigi.atlassian.net/browse/DEL-7540
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Userspace firmware loading support is required for the Linux imx-sdma driver.
The patches that accomplish this were originally in poky, but were removed in
the thud upgrade. Re-work the patches so they apply over systemd v239.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In very rare cases, random services would hang when powering off the system,
causing the poweroff process to stall for 90 seconds before timing out the stop
job. To avoid this behaviour, minimize the effect of these random freezes by
decreasing the timeout.
The default services in our system take well under 15 seconds to stop
gracefully, so we can guarantee that a timeout will never happen under normal
circumstances.
https://jira.digi.com/browse/DEL-6794
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
To avoid possible conflicts with NetworkManager, remove systemd-networkd
entirely.
https://jira.digi.com/browse/DEL-6610
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This modifies the behavior of the sd-resolve libsystemd component to prevent
the system from freezing whenever a service that uses said component is
stopped. Even though this doesn't free the terminated thread's resources
properly, this procedure only gets executed during the final moments of a
service's process before it exits, so resource leaks aren't an issue.
https://jira.digi.com/browse/DEL-6523
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Unlike eudev, which is used on images without systemd, the list of paths
systemd-udev uses to look for rules is very limited. Include an upstream patch
(commit 116b91e8ccfee1d44fc2b140d831d688e3747902 in the systemd repo) that
expands said list.
This fixes an issue with crda's regulatory domain rule file, which was being
excluded due to it being in a path systemd-udev was ignoring (/usr/lib/udev).
Because of this, the regulatory domain was never set properly and hostapd was
failing when configured to use 5GHz channels (which is the default config).
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches don't apply on the latest version of systemd used in Yocto 2.6.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without systemd, our KEY_POWER events were handled by the ACPI daemon, which in
turn issued a "poweroff" command. With systemd, the ACPI daemon is no longer
available and the events are handled by systemd-logind instead, which also
powers down the system properly. However, NXP added a patch that prevents
system-logind from handling the events, since they use the sc_powerkey instead.
Remove this patch to be able to power the target off via our power button.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These have been ported directly from NXP's meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Javier Viguera
Gabriel Valcazar
Mike Engel
Isaac Hermida
Arturo Buzarra
Hector Palacios
Hector Bujanda
Alex Gonzalez