We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Busybox's init enabled at build time collide with 'sysvinit' package.
This does not seem a problem when using RPM package manager, but using
IPK instead, the build is broken at image creation time:
Collected errors:
* check_data_file_clashes: Package sysvinit wants to install file <...>/rcS
But that file is already provided by package * busybox
https://jira.digi.com/browse/DEL-4573
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No applet has been enabled or disabled, just the defconfig file has been
refreshed for the current busybox version 1.24.x
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NetworkManager manages the 'resolv.conf' file globally, so there is no
need for pppd specific scripts for DNS.
These scripts race with NM to set DNS, leading sometimes to a scenario
where you have ethernet as the default gateway, but with DNS only
reachable via cellular.
While on it, also remove not used 'mm_cellular' configuration file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some modems (e.g. the XBee Cellular LTE Cat 1) have a long initilization
process and are not available when ModemManager tries to detect them
on boot.
For those modems schedule a rescan a bit later after NetworkManager has
been launched, so they are detected properly.
https://jira.digi.com/browse/DEL-4661
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These values configure the PPP daemon to check that the connection is
still alive (using an echo) and kill itself otherwise. On that event,
NetworkManager takes over and tries to restore the connection.
This is specially useful for modems with only one serial port, because
they are not able to signal the connectivity loss to the host (the only
data channel is used for the network data itself).
https://jira.digi.com/browse/DEL-4653https://jira.digi.com/browse/DEL-4650
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Use the 1.8.x stable series, as it has some desired functionality (e.g.
connectivity check) and bug fixes over the default version included in
Yocto.
https://jira.digi.com/browse/DEL-4628
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name of the repository in Github is fixed, because it is a fork from
the original repository.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This commit includes the Python3-Json package that is required now
by QT creator python scripts when debugging an application with GDB
on the target.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
For P2P interfaces, some drivers (CC6UL) create auxiliar interfaces based
on the parent one, like p2p-p2p0-0.
This commit adds a p2p* pattern to the list of unmanaged devices so that
NetworkManager doesn't try to manage P2P devices.
https://jira.digi.com/browse/DEL-4649
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The removed distro features are mostly corner cases, not widely used,
and sometimes conflict with other packages serving the same purposes.
For example:
* '3g' only adds ofono for cellular support, while we are
using ModemManager.
* 'nfc' adds 'neard' the NFC daemon (which at the moment we don't
support)
* 'zeroconf' adds 'avahi' package, but we are using NetworkManager
instead to manage the network interfaces.
* 'nfs' adds 'rpcbind' server, which is not needed at all to have
an NFS mounted rootfs.
Needless to say that all those packages can be added to any image
without having the distro features enabled, or if preferred, you can add
the distro features back in the project's local.conf.
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As we are using kernel's DEVTMPFS, using udev-cache on top of it does
not add much advantage. Disabling it has the extra advantage of avoiding
writing the udev-cache tarball under '/etc' (which probably won't work
on a read-only system).
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When bringing down the wireless interface used for hostapd, the messages
overlap:
# ifdown wlan1
Stopping HOSTAP Daemon: stopped /usr/sbin/hostapd (pid 569)
hostapd.
Adding the 'quiet' option to start-stop-daemon command fixes the
cosmetic issue.
# ifdown wlan1
Stopping HOSTAP Daemon: hostapd.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
"glibc-gconv" packages are GLIBC library specific, so add the proper
override to fix the build of the package using other C libraries (e.g.
MUSL).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the IOExpander is not programmed but the kernel is running its driver,
the following messages will appear when running sysinfo:
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/hw_version': No such file or directory
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/fw_version': No such file or directory
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Now the suspend script brings down all the wireless interfaces that are
managed by ifupdown command (in the '/etc/network/interfaces' file) and
then unloads the wireless driver.
On resume the script triggers an event so udev reloads the wireless
driver and then brings up the interfaces that were brought down on
suspend.
https://jira.digi.com/browse/DEL-4288
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The cellular interface is now managed by NetworkManager, so there is no
need for this custom script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the interfaces that are managed by Networkmanager
from the /etc/network/interfaces entry.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
So the package can be compiled in a non-X11 graphical system.
https://jira.digi.com/browse/DEL-4289
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Disabled: dnsmasq and netconfig
* Enabled: cellular related options and connectivity check
https://jira.digi.com/browse/DEL-4289
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If values are provided in the local.conf, the package will have the
'config.json' file preconfigured.
https://jira.digi.com/browse/DEL-4274
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rename the class so it's not specific to the C version of the AWS IoT
Device SDK, and can be used for anything related with AWS IOT (for
example Greengrass).
https://jira.digi.com/browse/DEL-4274
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This avoids the following errors:
ERROR: dey-examples-opengles-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary
and when cleaning:
ERROR: dey-examples-opengles-1.0-r0 do_configure: oe_runmake failed
| make: *** No rule to make target 'clean'. Stop.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This recipe allows to generate the swu update package to be used with SWUpdate.
The package can be generated using:
bitbake dey-image-aws-swu
https://jira.digi.com/browse/DEL-4304
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Javier Viguera
Jose Diaz de Grenu
Mike Engel
Isaac Hermida
Arturo Buzarra
Tatiana Leon
Sebastian Pastor