Firmware verification has a side effect in cc6ul sbc express platform
that affects to the bluetooth initialization.
https://jira.digi.com/browse/DEL-5802
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rarely the bluetooth firmware is not loaded properly and causes
errors in the configuration steps. This verification makes sure
the firmware was loaded and is functional, if not we start the
retry mechanism with the default baudrate to avoid the firmware
corruption in the upload process.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bash v4.4 or higher warns when discarding NULL bytes in command substitution
output. Remove these bytes to avoid the undesired warnings.
https://jira.digi.com/browse/DEL-5588
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is the stack covered by the Bluetooth certification. We will keep
it even though the newer bluez 5.46 will be used by default.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
* 'experimental' has been renamed to 'testing' in Bluez 5.44
* Several patches (0004..0011) are now upstream and can be removed
* QCA specific patches have been refreshed
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Avoid splitting the boot script message in two different lines:
Starting bluetooth hardware: [OK]
done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following changes have been made to the bluetooth-init script:
* Remove "hciconfig hci0 up/down" and this is now deprecated and likely
to fail. We use the AutoEnable feature of bluetoothd for this now.
* Move setting the MAC address to hciattach instead of using hcitool.
* Remove resets performed by hcitool and hciconfig. The hciattach
application already performs a reset and that should suffice.
* Remove hciattach retries.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commits adds patches to hciattach for the following:
* Strict flow control setting
The hciattach application has a flow | noflow command line argument that is
currently only applied on the first configuration of the uart port. The
hciattach_rome plugin ignores this setting and assumes hardware flow
control is always supported. This commits makes hciattach obey the user flow
control indication.
* Modify hciattach_rome to set MAC address. The MAC address setting
feature in the rome plugin now works with the command line specified
MAC.
* Reduce verbosity. hciattach now accepts a "-v" verbose flag. By
default verbose output it omitted.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewing the patches while updating the QCA firmware to a new release,
I encountered this patch. On the original PR it says:
"Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this save us from some syncronism problems if we are not
using HW flow control."
Current spins of the module already use hw flow control. Also, not allowing
hciattach to override the baudrate does not seem right to me. It would be
enough with passing a 3M baudrate to hciattach to match the firmware
default.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Implement:
* support to start, stop and restart interface
* states machine and retries system to recover from command failures
* overall simplification and code clean-up
https://jira.digi.com/browse/DEL-3858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Arturo Buzarra
Jose Diaz de Grenu
Sebastian Pastor
Javier Viguera
Alex Gonzalez