OPTEE_PKGS variable must have a default (empty) value to prevent bitbake
parsing errors.
This fixes a build failure for MP1 platforms where the variable was
undefined in the commit that added the support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NXP platforms that have 'optee' in the MACHINE_FEATURES, will install
optee userspace packages (ccimx8m and ccimx93 at the moment).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the overlay required to perform the BLE HCI Raw test to the
linux default images. That way, default images can be used to certify
the product.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
An official fix was added to meta-timesys in commit
ae4f6e9854361d4a6d71b6f8b87130268d990b32, so our workaround is no longer needed
This reverts commit 7a77130550.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 32dd3d59c250f916115b339c29aa4dbfe50a3235 in poky breaks i.MX platform
builds when "vigiles" is inherited. While we wait for a fix in the community,
work around this issue by setting a dummy default value in the MULTIUBI_BUILD
variable.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of changing POKY_DEFAULT_DISTRO_FEATURES, do the distro features
configuration directly in the DISTRO_FEATURES variable. Also, add a couple
of variables (MACHINE_DISTRO_FEATURES_ADD/REMOVE) that allow machines
for extra tweaking the distro features.
While on it, clean up some distro features:
- pulseaudio: already added by DISTRO_FEATURES_BACKFILL
- bluez5, splashscreen, initrd, gplv3: not used (dead code)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are other device managers (e.g. mdev) that do not understand those
udev rules, so do not install them unconditionally.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds an overlay for DVK v1 and modifies the boot script to apply it
based on the board_version variable.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Move generic IMX machine firmware to imx-digi-base.inc file. This eases
maintenance, as this file follows imx-base.inc in meta-freescale.
Still, configure platform's Digi specific firmware in each machine's
config file.
As a positive side effect, this removes the "firmware-imx-easrc-imx8mn"
firmware file from the 8M Mini, as it's only used in the 8M Nano. This
saves about 263KB.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For now, we're only interested in generating the SBOM, which we can upload and
have Vigiles scan later on if needed. The report generation process adds some
overhead and can cause unwanted errors if the Vigiles server takes too long.
Enable report generation for our automated builds.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
ConnectCore 93 DVK only connects the XBee reset line (XBEE_RESET_N_GPIO) but not
the sleep request (XBEE_SLEEP_RQ_GPIO)
It also reworks the 'xbee-init' script to support empty reset
(XBEE_RESET_N_GPIO) or sleep request (XBEE_SLEEP_RQ_GPIO) values.
https://onedigi.atlassian.net/browse/DEL-8375
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
accel-video was being used only for including or not gstreamer in the
different DEY images. But then we had exceptions to include gstreamer for
machines that do not define accel-video, so just follow what the ccmp15
does, and use a generic 'gstreamer' distro feature to add 'dey-gstreamer'
support to the images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
MACHINE_GSTREAMER_1_0_PLUGIN should contain the machine-specific gstreamer
plugin to use, but not the rest of the packages to be included in the
rootfs. So clean that variable up, and add the dependent packages in the
dey-gstreamer package group.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a machine specific setting, and moving it to the machine config
allows to get rid of the recipe bbappends.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The class 'boot-artifacts.bbclass' was created to generate a
list of the bootable artifacts that must be copied from the
deploy dir to the installer ZIP file, so that the installer
has all the possible bootloader files to update any variant
of the hardware.
The class was somewhat over-engineered to produce the list,
specially for the cc8x, with the variants of SoC revision,
RAM size and width. With the arrival of ST family, it got
more complex, as the artifacts don't even come from U-Boot
recipe.
To remove complexity, this commit removes the bbclass and
moves the list to the platform config file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
meta-freescale did another merge of recipe updates that we need to follow
to prevent build failures.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the momment, Fusion support is not ready in the 5.15 kernel, so do
not add the dtb overlay.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The sdcard image generation code expects a boot artifact named after
machine's name. On the other hand, u-boot recipe creates symlinks with
the build config's name. So couple machine with build config label to
prevent a failure when building the SD card image.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Although in theory, you can use any label to name the different u-boot
build configurations, we have them coupled to machine names in the
boot-artifacts bbclass, and also in the default boot artifact filename
in the firmware installation scripts.
So fix that up for the ccimx93 in the machine config, and create the
proper symlinks in the do_deploy imx-boot recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This variable was removed from meta-st-stm32mp so we need to get rid of it
in meta-digi, too.
Reported-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8268
For this platform the bootable artifact is imx-boot based, so configure
some variables accordingly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rework the "build_uboot_scripts" to prevent changing the templates in
the WORKDIR, as those are part of the SRC_URI. Instead, change the
deployed scripts by using "sed" and redirection.
Also, removed UBOOT_HAS_FASTBOOT altogether, as there is no platform
that does not support fastboot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of overriding the whole do_compile function, just to reconfigure
u-boot for Trustfence, create a do_configure pre-function that takes care
of that. This allows the removal of duplicated code.
Also, disable the generation of u-boot environment artifacts. We are
not using them and so many u-boot artifacts in the deploy directory
are confusing.
Finally, adjust the names of the TF u-boot artifacts in the do_deploy
append function.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use += operator to prevent resetting the value of the EXTRA_IMAGEDEPENDS
variable. That is how it's mostly used elsewhere.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is later overridden in the machine config files, but a default
(not empty) value is needed, to prevent a syntactic error in
init-ifupdown recipe (where it is used).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
A new set of meta-freescale updates broke our layer, because they
updated opencv package and our bbappend does not apply anymore.
The build fails at parsing:
ERROR: No recipes in default available for:
meta-digi/meta-digi-dey/dynamic-layers/freescale-layer/recipes-support/opencv/opencv_4.5.2.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows users of the layer to override the value with a different
default. Same change was done in meta-freescale's imx-base file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When read-only feature is enabled, the rootfs should be .squashfs
and not .ubifs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit c32278af74cea8cb38aa81590eaa867be1c739c9)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit removes duplicated and unused build artifacts for the ccmp1
platforms. Also fixes a build warning related with flashlayout config file.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds the extra machine specific configuration files for udev on
ccmp1 platforms to allow, for example, automount storage devices.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The recipes have been updated in meta-freescale, and version 1.18.5.imx
is no longer available.
Follow same change in meta-freescale's "conf/machine/include/imx-base.inc".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fixes a failure in the firmware installation script when trying to
program crank images:
./install_linux_fw_uuu.sh -i dey-image-crank
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.boot.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.recovery.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.ubifs'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale updated to version '10.0.0.imx', so our bbappend fails
with:
ERROR: No recipes in default available for:
... meta-digi-dey/dynamic-layers/freescale-layer/recipes-graphics/wayland/weston_9.0.0.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As that's an old VM with limited specs, there is no much gain on using
it over the canonical Stash repositories that justifies the code
overhead and the possible errors due to synchronization problems.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default STM layer creates extra partitions, the vendorfs partition is
reserved to save custom STM libraries and binaries, however the ccmp15 platform
does not have this additional partition, and stores all the libraries in the
rootfs.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Also, fix the sequence number of the GPIO_SET_DEBOUNCE_IOCTL ioctl. Same
fix has been done in Linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Isaac Hermida
Gonzalo Ruiz
Gabriel Valcazar
Hector Palacios
Arturo Buzarra
Tatiana Leon
Mike Engel
Francisco Gil