Make the 'defconfig' file a real defconfig by including only differences with respect default
values. While on it, improve the recipe:
- Enable 'BOOTLOADERHANDLER' by default in the 'defconfig'. We were unconditionally setting
this value to 'y' in the recipe, so move it to the default configuration.
- Move 'UBI' configuration values to 'mtd.cfg' file to be added only when device filesystem is
MTD based. Until now, 'UBI' support was always added by default.
- Move the 'SIGNED_IMAGES' configuration entry to a '.cfg' file like we are doing with the rest
of the functionallity. Use 'oe.utils.conditional' checking 'TRUSTFENCE' feature for this.
Signed-off-by: David Escalona <david.escalona@digi.com>
Enable scripting support during the installation of system images with SWU. A new shell
script is included by default in all the SWU update packages that will be executed just
before the update starts and just after it finishes. The script is empty and contains two
place-holders that will be called in the two scenarios mentioned before.
Users can customize this script to execute specific actions based on their final product
needs or provide their own one by setting its location in the 'SWUPDATE_SCRIPT' variable.
While on it, rename the 'sw-description_template' file to 'sw-description-images_template'
as it is more accurate with the update mechanism it is used for.
Signed-off-by: David Escalona <david.escalona@digi.com>
This variable is not defined in ccmp1 platforms, making the
swupdate for single mtd failing.
Instead of reading this variable from uboot environment,
determine if the system is multimtd checking the existence
of /dev/ubi1.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Ensure we leave the Bluetooth interface up after attaching it. If not,
under some circumstances, it could be down.
https://onedigi.atlassian.net/browse/DEL-8608
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The default ethosu_firmware in github reconfigures the uart2 to be used as
debug port. Those pins are used to manage the HW flow control for the Bluetooth
chip.
Build a custom ethosu_firmware that does not reconfigure the uart2 pins.
Compiled from internal "ethos_u_firmware.git" repository on Stash,
with revision 48a4b9e6a0770212aac529fb7f81ed2e6ff51cbd
md5sum: 0bf8686fcabec7378483755106dc6433
https://onedigi.atlassian.net/browse/DEL-8587
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Backport from NXP's lf-6.1.1-1.0.0 release for the ccimx93 (meta-ml
layer).
This version of flatbuffers is needed for ethos-u-vela version 3.6.0
(backported in following commit).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The fact of including both storage types (mtd and mmc) in the same 'sw-description' file is not providing any kind
of benefit. Instead, it makes the file larger, complex and harder to maintain. Additionally, most of the images
entries share the same structure and contents, changing only names and mount points. This commit simplifies the
'sw-description' file by configuring the storage type and the images to include in the SWU package at build
time, using a generic 'sw-description' template and template files for 'mmc' and 'mtd' images.
While on it, use the new 'DEY_FIRMWARE_VERSION' variable for SWU package version and fix the recipe to not include
all 'SRC_URI' files in the SWU update image, but only the required files for the update. Also, make use of variable
substitution provided by SWU class in the 'sw-description' file.
Note: SWU U-Boot update will be broken after this change. Waiting for official support with a robust implementation.
https://onedigi.atlassian.net/browse/DEL-8537https://onedigi.atlassian.net/browse/DEL-8538
Signed-off-by: David Escalona <david.escalona@digi.com>
While on it, rename the old "Firmware" variable to "DEY version", as it refers explicity to the DEY
distribution version.
https://onedigi.atlassian.net/browse/DEL-8539
Signed-off-by: David Escalona <david.escalona@digi.com>
If 'CC_DEVICE_TYPE' is not defined or it is empty use 'MACHINE' as the device
type in the Cloud Connector configuration file.
This commit also limits its length to a maximum of 255 characters.
https://onedigi.atlassian.net/browse/DEL-8531
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
In a squashfs the mount points are different and the current logic
wasn't working.
It's more reliable to check the /proc/cmdline to determine if
the system is a nand or an emmc.
Added also logic to get the active partition in nand devices
when the rootfs is squashfs.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When a squashfs image is flashed we need to delete the compression
field in the swupdate descriptor.
Also the rootfstype u-boot variable needs to be set to squashfs.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We used to use BAD_RECOMMENDATIONS to remove this package in ccimx6 builds,
we enable the imx-gpu-viv driver as built-in in our kernel, but this method
isn't working anymore. Instead, undo the specific RRECOMMENDS that pulls the
module in.
Apply the change for the aarch32 version of the package only, since this change
is only needed for the ccimx6 platforms.
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of depending on library releases in Pypi, update the recipe to compile latest
Github code. This allows to use minor fixes in DEY before a new release of the library
is available. While on it, set the 'SRCREV' to point to the last commit of the repository
for traceability.
Signed-off-by: David Escalona <david.escalona@digi.com>
Main development of the library will be done in Github. The Stash repository will be
used as a "security backup mirror", so update the recipe to always compile from Github.
Signed-off-by: David Escalona <david.escalona@digi.com>
This commits changes the CONFIG_CONSOLE_ENABLE_GPIO_NAME to be a string
and not an integer.
https://onedigi.atlassian.net/browse/DEL-8520
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Sometimes, it may be desired that the DEY project does not sign the
artifacts, for example, if they are going to be externally signed on a
secure server. In this case, the user sets TRUSTFENCE_SIGN="0".
On STM platforms, all the variables were being set if TRUSTFENCE_SIGN="1"
and authentication support is not enabled on TF_A otherwise.
Set TF_A_SIGN_ENABLE (which adds authentication support to TF_A) always
for STM platforms (as long as the project inherits the trustfence class)
and set FIP_SIGN_ENABLE="0" if its sibling TRUSTFENCE_SIGN="0", so that
DEY doesn't sign the FIP image either.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The root file system requires the public key to authenticate SWU files.
For NXP platforms, the public key is extracted from the certificate.
For STM platforms, simply copy the public key over to the rootfs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For the moment, do not sign aditional artifacts, such as the ramdisk,
the kernel or the boot scripts for STM platforms.
In the specific case of the ramdisk, simply copy it over with the
expected filename extension.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Several recipes depend on the PKI creation.
Create a small recipe to just run this function which
is moved from the trustfence.bbclass.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
dualboot and recovery recipes may require to use the keys so they must
depend on the recipe that installs the script that generates them.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).
This is the case, for example, of:
- ccmp1 (family)
- ccmp15 (SOM)
- ccmp13 (SOM)
- ccimx8m (family)
- ccimx8mm (SOM)
- ccimx8mn (SOM)
Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Set TRUSTFENCE_DEK_PATH to "0" for CCMP1 (not using dek.bin), as if this
was disabled.
Set temporarily TRUSTFENCE_ENCRYPT_ENVIRONMENT to "0" for CCMP1 until
environment encryption is fully supported.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The name of the variable was not very intuitive of what
it contains. This variable expands to the SoC vendor
(NXP or STM).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This package was inadvertantly pulling in a lot of dependencies into our
images that make use of Qt6. Most of these packages consisted of *-dev
packages, which are only useful for development with the SDK.
Remove this package along with its dependencies to significantly reduce the
dey-image-qt rootfs image size.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit d2c1494bbf36b6392e47ffd4a75307d29681d190 in poky adds this variable
to EXTRA_OESCONS, which breaks the do_compile() task of this recipe. Remove
the variable to be able to build the package.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
David Escalona
Francisco Gil
Isaac Hermida
Javier Viguera
Tatiana Leon
Mike Engel
Gabriel Valcazar
Arturo Buzarra
Hector Palacios