udev will attempt to load the atheros kernel modules because it defines
a modalias that matches an sdio bus event.
In a race condition with the script in if-pre-up, the module will crash.
Recent versions of udev have lost the ability to add an ignore_device
option to the rules, and mdev in del-image-minimal has no module
autoloading ability.
The commit adds a modprobe install rule that does nothing, and allows
the if-pre-up script to load the module as it used to.
Fixes https://jira.digi.com/browse/DEL-277
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit adds a Digi premirror to the DEL distribution file. This
premirror will be tried first. It default to build-linux.digi.conf but
will be customized for the layer public release.
This still allows for a project to be customizes with a
SOURCE_MIRROR_URL which will be tried before the premirrors.
Fixes https://jira.digi.com/browse/DEL-186
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The del-image-minimal will included the graphical acceleration libraries
if the machine supports accel-graphics.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The del-examples-sahara now depends on the kernel modules it needs to
work and these are autoloaded at boot.
Fixes DEL-274.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For this the CCIMX51 and CCIMX53 kernels are configured to build the
mma7455l module and it is included as a dependency of the del-examples-
accelerometer application.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This conflicts with user led 2 used in the GPIO example add and with
other interfaces needed in the del-image-graphical image.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
So they don't depend on the machine files from meta-fs-arm layer.
This allows to override some settings in project's local.conf file.
https://jira.digi.com/browse/DEL-219 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Wakeup interrupts were not happening upon USB stick plug
events during normal work. This had the effect of the
interrupt happenign when going to suspend and usually when
the driver is not able to handle it, causing a nobody cared
message from the kernel.
https://jira.digi.com/browse/CCIMX28-326
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Just a cosmetic name change for the merged wired and wireless platforms.
This and related commits fixes https://jira.digi.com/browse/DEL-188.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
While on it, revert PROVIDES to its previous state, not depending on
DISTRO_FEATURES. This was tweaked to avoid a bitbake warning. Not it is
solved in a conditional BBMASK.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fixes a bug in 'ccardxmx28js' where the wpa_supplicant was using
the wrong driver 'wext' instead of the 'nl80211' (for atheros)
https://jira.digi.com/browse/DEL-220 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also enable CONFIG_BRIDGE in kernel configs (which is required to use
brctl)
https://jira.digi.com/browse/DEL-156 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Enable RFKILL. Otherwise on boot we get an error message:
rfkill: Cannot open RFKILL control device
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need the kernel configuration file in /boot for some of the postint
scripts that aim to do smart things like autoconfigure the interfaces file.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The bootloader is passing the mac address and wdmode in the kernel command
line.
The driver startup script reads and and sets them.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The bootloader is passing the mac address in the kernel command line.
The driver startup script reads it and sets it.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Seems that the options Yocto was using to generate the jffs flash image
are not correct for ccardxmx28js. Specially mkfs.jffs2's padding option
'-p' was making the rootfs corrupted on second boot (as explained in
JIRA DEL-218).
Finally i decided to use the same mkfs.jffs2 parameters we were using in
DEL and those seems to be working fine.
https://jira.digi.com/browse/DEL-218 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new defconfigs are needed after merging the wireless and non wireless
products in the linux kernel source.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
U-Boot has a set of pre-defined make targets per platform that allow
to configure u-boot for different variants (128sdram,4Kpage,dbg etc.)
This change allows to use a UBOOT_CONFIG_VARIANT variable in your
local.conf file to choose which variant to build.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The ConnectCard needs a bootstreamed (.sb) u-boot to boot from flash. This
is flashed using u-boot.
This changes compiles a bootstream u-boot image. The bootlets are compiled
separately and it's U-Boot's Makefile that calls elftosb to generate the
final bootstream.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This package contains firmware files for the MXS Digi family (Embedded and
boxed products).
Now it contains the bluetooth binary firmware files.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
It will be included in all machines that include the bluetooth feature,
currently the ccardxmx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The prebuilt libraries int fsl-mm-flv-codeclib package do not follow the
lib*.so.* naming rule, and so the creation of the IPK package fails.
This is a workaround. The proper fix should be send upstream
(meta-fsl-arm).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need to split the EXTRA_OEMAKE flags as the do_make_scripts stage
fails if we pass a "M=" argument.
We override module_do_compile and module_do_install to add the extra
make flags as I have not found a working way of overriding EXTRA_OEMAKE.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The mx5 GPU libraries provide OpenGL ES1, OpenEGL and OpenGL ES2 only
so we need to ajust the PREFERRED_PROVIDER.
There is an equivalent commit in FSL layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed to use SOC_FAMILY data and was the reason why imx-lib was
not compiling correctly (see commit cec37f0).
Thus revert also commit cec37f0 because that workaround is not needed
anymore.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This included the recipe where the driver is cloned from git and compiled
from source.
The recipe also copies the firmware files and the if-pre-up scrip.
Pending is the recipe to link from precompiled objects in a .tar.gz file.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Javier Viguera
Alex Gonzalez
Hector Palacios