Add the overlay required to perform the BLE HCI Raw test to the
linux default images. That way, default images can be used to certify
the product.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Instead of changing POKY_DEFAULT_DISTRO_FEATURES, do the distro features
configuration directly in the DISTRO_FEATURES variable. Also, add a couple
of variables (MACHINE_DISTRO_FEATURES_ADD/REMOVE) that allow machines
for extra tweaking the distro features.
While on it, clean up some distro features:
- pulseaudio: already added by DISTRO_FEATURES_BACKFILL
- bluez5, splashscreen, initrd, gplv3: not used (dead code)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds an overlay for DVK v1 and modifies the boot script to apply it
based on the board_version variable.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The class 'boot-artifacts.bbclass' was created to generate a
list of the bootable artifacts that must be copied from the
deploy dir to the installer ZIP file, so that the installer
has all the possible bootloader files to update any variant
of the hardware.
The class was somewhat over-engineered to produce the list,
specially for the cc8x, with the variants of SoC revision,
RAM size and width. With the arrival of ST family, it got
more complex, as the artifacts don't even come from U-Boot
recipe.
To remove complexity, this commit removes the bbclass and
moves the list to the platform config file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This variable was removed from meta-st-stm32mp so we need to get rid of it
in meta-digi, too.
Reported-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8268
Rework the "build_uboot_scripts" to prevent changing the templates in
the WORKDIR, as those are part of the SRC_URI. Instead, change the
deployed scripts by using "sed" and redirection.
Also, removed UBOOT_HAS_FASTBOOT altogether, as there is no platform
that does not support fastboot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
By default STM layer creates extra partitions, the vendorfs partition is
reserved to save custom STM libraries and binaries, however the ccmp15 platform
does not have this additional partition, and stores all the libraries in the
rootfs.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
* fix arch tune files path in machine config
* update imx-digi-base config file (using as a base the imx-base.inc
config file in 'meta-freescale')
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, the STM layer includes several tools in the SDK, one of which is
the gcc-arm-none-eabi toolchain. However, in the build process it throws the
following unexpected error about an unsatisfied runtime dependency:
Error:
Problem: conflicting requests
- nothing provides libpython2.7.so.1.0()(64bit) needed by
nativesdk-gcc-arm-none-eabi-9-r0.1.x86_64_nativesdk
Since this package works with python3, python2 was deprecated and this tool is
only needed to build Cortex-M4 applications, this commit removes this package
from the default SDK.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This platform initializes the Bluetooth interface through the own bluetooth
driver, so the custom Digi init scripts are not needed.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the "Image" for the "zImage" as the default kernel image
type for the STM platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gonzalo Ruiz
Javier Viguera
Hector Palacios
Arturo Buzarra
Tatiana Leon
Mike Engel