Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-kernel/kernel-module-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For development this would not be needed as it points to AUTOREV, but
for releases we need to specify the SHA1 revision, and this recipe
builds two different branches (for NXP and STM platforms), so we need a
place to define two different revisions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The SRCREV may change depending on the version of the kernel, so it
cannot be a common variable for all kernel versions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the canonical Stash repository to avoid synchronization problems
between the repo and the mirror.
Moreover the LOG mirror is hosted in an old VM machine with limited
specs, and although the transfer of the objects is faster, the counting
of the objects to transfer (which is done in the server) takes ages to
complete, so at the end, there is no time gain using the mirror.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Commit 8cba3aaefb in 'meta-freescale' changed the kernel_localversion
function we are using in our kernel recipe. This leads to a not-properly
configured kernel build, where CONFIG_MODULES is disabled. That
config option is needed to build external kernel modules in other
recipes, so those recipes (kernel-module-qualcomm, cryptodev-module,
etc) fail to build.
The commit makes sure the kernel is properly configured for building by
extending the do_configure function in a "prepend".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It's just a waste of space as we already have the kernel image in the
'linux' partition and that gets mounted under /mnt/linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The enable p2p patch add support for enabling p2p as module parameter setting
it by default to false.
The cfg80211 netdevice fixes the registration of virtual interfaces for kernels
v5.12+.
https://onedigi.atlassian.net/browse/DEL-7986
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Also, fix the sequence number of the GPIO_SET_DEBOUNCE_IOCTL ioctl. Same
fix has been done in Linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove deprecated versions of recipes updated in other general layers
(poky, meta-openembedded). Also remove duplicated IMX specific recipes that
are available in other BSP layers (meta-freescale, meta-fsl-demos, etc).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto is becoming more strict on not using tags in the SRCREV, as that
may lead to problems in the different tasks of a bitbake recipe.
As of Yocto 4.0, bitbake errors when such condition happens, with:
"Recipe uses a floating tag/branch without a fixed SRCREV"
So convert the SRCREV of all tags to the proper SHA1 revision.
Also, extend the 'fix-build-issues' to delete '-Werror' from the
compilation flags. Newer versions of GCC (as the one used in Yocto 4.0)
throw more (new) warnings, and the '-Werror' flag was making the build
to fail.
cc1: all warnings being treated as errors
lim_api.c:1057:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
lim_admit_control.c:169:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a patch for the qcacld-3.0 wireless driver to read the
wireless MAC addresses from device tree. This patch is based on the original
commit from qcacld-2.0 driver improving and simplifying the code to work with
the new qcacld-3.0 driver.
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the Linux wireless driver for Qualcomm's chipset to the
new qcacld-3.0 driver.
This update is based on the release "r10016.1 - Post-CS3 1.0.016.1" from
"qca6574au-le-2-2-1_qca_oem" product branch, which uses for a Linux kernel v5.4
the tag "CHSS.LNX_FSL.5.0-01200-QCA6574AUARMSDIOHZ".
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit avoids creating a subfolder for the kernel artifacts, to homogenize
it with the NXP platforms and avoid using custom recipes for the result
artifacts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The sign mode needed for each platform is invariable, and since the platform
is already a mandatory parameter for the script, we can store this information
implicitly. Reflect this change in every recipe where the script is used, but
keep the variable at the Yocto level since it's still needed in several places.
https://onedigi.atlassian.net/browse/DEL-7862
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The license checksum and the source branch should be on the properly
versioned bitbake recipes. Otherwise, when we include this common file
in a different version linux recipe (for example, the upcoming 5.10) it
will inherit incorrect values.
While on it, fix the incorrect license checksum values for the linux 5.4
recipes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This makes it so bitbake obtains the SDMA firmware from the firmware-imx recipe
instead.
This also avoids including all of the linux-firmware packages in i.MX6 SDK
builds, preventing errors when building the ccimx6sbc SDK (linux-firmware
provides the community versions of the ath6k and ar3k firmwares, which clash
with our versions).
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is used by the eIQ recipes, so make sure we have NXP's .bbappend
so it works as expected
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 3.2-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Create this symbolics links in build time instead of doing it
in run-time. This simplifies the system and allows it to work
with read only filesystems.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Before this patch the MAC addresses were read from the device
tree in the qualcomm.sh script executed at init, and a creates
a file where the MAC where located.
In 0a92f5d9e8df644de74e74f152ed6ff3dd8d3369 in the qca driver
the support to read these MAC addresses from the filesystem
was added.
This commits creates the simbolic link between the device tree
and the expected path where the MAC addresses where located, and
gets rid of the file with the MAC addresses.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This change was accidentally reverted when merging to dey-3.2/maint, causing
the qualcomm module to be missing in the rootfs.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows the packages to be included in the ccimx6sbc images. While at it,
include the Qualcomm bluez patches in ccimx6 builds. These patches aren't
destructive, they simply add functionality required by the Qualcomm chip, so
they shouldn't have any secondary effects when using the Atheros chip.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
- Add the '-m' parameter. Without it, the script doesn't
generate the output merged configuration file, and the
fragments are not applied.
- Fix the if condition. The '*.cfg' expands to a list of
files, but the '-f' only admits one parameter. Use instead
the Python find_cfgs() function.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This allows users to apply small changes to our kernel configuration without
having to create a completely new defconfig. Use a simplified version of the
kernel-yocto.bbclass implementation.
https://onedigi.atlassian.net/browse/DEL-6706
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Enabling DIGI_INTERNAL_GIT defaults to LOG server. The build from local
MTK Digi server was broken.
Fix uboot and linux recipes declaring different repo paths depending on
whether the local remote is LOG or MTK.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit backports a patch to fix the following build issue with
the GCC v10:
dtc-parser.tab.c:1069: multiple definition of `yylloc'
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit ffeb0556("classes: fsl-kernel-localversion: Fix task dependency") in
meta-freescale layer fixes a task dependency issue, so do_preconfigure() was
renamed to do_kernel_localversion().
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove all v4.9 recipes and build Linux using the same branch on all platforms.
The .inc files were only needed because of the existence of multiple Linux
versions, but that's not the case anymore, so remove them.
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The signing script is used for signing multiple artifacts, not just the
kernel, so rename it for a broader use.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signing with AHAB mode only requires an additional prior step, so
reuse as much code as possible.
Also, for Image.gz images, sign the uncompressed Image and later
compress the result.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
imx-mkimage is a host recipe to provide the mkimage_imx8 binaries, required
for the trustfence support with platform based on AHAB (ccimx8x). Since
these binaries are required to the sign process we need to export it in the
SDK to allow the standalone sign mode, and with that we can simplify the
mechanism to share these binaries with another recipes (u-boot, linux).
Also the do_deploy() from imx-mkimage recipe was removed to avoid overriding
the implementation from the native class and allow populating the mkimage
binaries.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi customized linux kernel gpio.h file to allow debounce functionality by the
user space through the character device.
This commit patches the gpio.h file that is used to generate the SDK (which comes
from kernel 5.4) with Digi debounce additions.
https://jira.digi.com/browse/DEL-7027
Signed-off-by: Hector Bujanda hector.bujanda@digi.com
Added rsync to the native dependencies, since it is used during
header install to prevent a build issue.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Default version is defined in poky layer, this commit also modifies
the preferred version to match with the new one.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove support to kernel v4.14 and move platforms to use the new
kernel v5.4
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In meta-freescale was renamed the linux-imx-headers recipe with the
full linux kernel version "4.14.98". With that change our custom
recipe from meta-digi is not selected. This commit reuses the recipe
from meta-freescale layer and modifies it.
https://jira.digi.com/browse/DEL-7001
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi customized linux kernel gpio.h file to allow debounce functionality by the
user space through the character device.
This commit patches the default gpio.h file that is used to generate the SDK
(which comes from kernel 4.18) with Digi debounce additions.
https://jira.digi.com/browse/DEL-7027
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Digi Embedded Yocto 2.6-r3.1
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Mike Engel <mike.engel@digi.com>
This commit adds some dependencies to include the imx-mkimage package
that is needed to use the mkimage_imx8 tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Regulatory domain support will be added completely with the 'regulatory-addon'.
Also simplify symlink management now that BDF file has the same name for
every platform.
https://jira.digi.com/browse/DEL-6841
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update the wireless driver to a newer version that supports both
chips (qca6574 and qca6564).
We keep the same bdwlan30_US.bin files as the previous version
of the driver (or fakeboard_US for the qca6474).
Rename directories to qca65X4_driver_interface.
We have used the files from the following repo:
qca6574au-le-2-2-2_qca_oem -> 4d29c6886f2Commit label r00005.1
- CS2.2 0.0.005.1
md5sum
----------------------------------------------------------
qca65X4_pcie: otp30.bin -> 9d1cf03473904bd8b97fa30bc92b4a16
qwlan30.bin -> 794f7a6f12ef3e6f8db6257b3a6f896f
utf30.bin -> 41cfb4e50613cd0eeb0fa99a005131bd
qca65X4_sdio: otp30.bin -> e018e7b629b055dc4616c7e88c615b41
qwlan30.bin -> fe37bc043132ecf21e504eb33f46b846
utf30.bin -> 4743dee015047752e433e69f4db89974
https://jira.digi.com/browse/DEL-6766
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Also remount the root filesystem as 'rw' when the symlinks need to be
updated.
https://jira.digi.com/browse/DEL-6760
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Obtain the mount point of the filesystem to remount as 'read-write' from
/proc/mounts to avoid issues related to df output wrapping on a second line
when the device filesystem name is too long.
When the script finishes, remount the filesystem as 'read-only' if that was
the original access permission.
https://jira.digi.com/browse/DEL-6760https://jira.digi.com/browse/DEL-5854
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Generalize script to select the correct board data file to load into the
wireless chip depending on the Regulatory Domain configuration whether it
is a variation of 'bdwlan30.bin' or 'fakeboar.bin'.
If 'bdwlan30_US.bin' or 'bdwlan30_World.bin' files are found in the firmware
directory, the script will create two symlinks, 'bdwlan30.bin and 'utfbd30.bin',
pointing to either one of those files.
If no 'bdwlan30_*.bin' files are found, but 'fakeboar_US.bin' or
'fakeboar_World.bin' is, it will create a single symlink, 'fakeboar.bin',
pointing to either one of those files. In the case a QCA6574 community driver
is loaded, 'board.bin' symlink will be updated.
If no 'fakeboard_*.bin' files are found either, the script will exit.
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Generalize script to select the correct board data file to load into the
wireless chip depending on the Regulatory Domain configuration whether it
is a variation of 'bdwlan30.bin' or 'fakeboar.bin'.
If 'bdwlan30_US.bin' or 'bdwlan30_World.bin' files are found in the firmware
directory, the script will create two symlinks, 'bdwlan30.bin and 'utfbd30.bin',
pointing to either one of those files.
If no 'bdwlan30_*.bin' files are found, but 'fakeboar_US.bin' or
'fakeboar_World.bin' is, it will create a single symlink, 'fakeboar.bin',
pointing to either one of those files. In the case a QCA6574 community driver
is loaded, 'board.bin' symlink will be updated.
If no 'fakeboard_*.bin' files are found either, the script will exit.
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Error message was being printed upon successful copy of the
MAC addresses file, instead of upon failure.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
On some scenarios, like when booting from NFS, the root filesystem is not
writteable. When this happens the qualcomm.sh is not able to write the MAC
file which so the wireless driver fails to load.
The arguments that U-Boot uses when booting from NFS using dboot result in
the root filesystem being mounted as read-only, but at some point it is
remounted as read/write. This happens after trying to load the wireless
driver, though.
Currently this is the only scenario in which we can reproduce the problem,
and there are several other processes in DEY that require a writeable root
filesystem (wireless SSID editing, Dropbear SSH key-gen and u-boot-fw-utils)
so remount the rootfs as writteable as a workaround.
While on it improve the script a bit to notify on error trying to create
this file, just in case this happens in other scenarios.
https://jira.digi.com/browse/DEL-5854
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All the dependencies of the required symbols are also added.
These are easier to mantain and enable the minimum support. If extra
features are required they shuold be explicitly added.
https://jira.digi.com/browse/DEL-6681
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
When using virtualization, ammend the kernel configuration so that docker
is supported.
https://jira.digi.com/browse/DEL-6681
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Even though our ccimx6 and ccimx6qp images were using Linux v4.9 sources
correctly, they were using the same recipe as our images with Linux v4.14.
Technically, both recipes are identical (save for the branch name), but each
Linux version should have its own recipe.
Also, make sure that ccimx6/ccimx6qp images are built with our version of the
linux-imx-headers recipe instead of the one in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We want to run the script if the 'wireless' node exits on the device tree.
This is to facilitate disabling of the wireless by removing that node.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6616
P2P disabled is the default in the kernel module, so passing here the
parameter to 'modprobe' does nothing but prevents to set the parameter
in the kernel command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
P2P disabled is the default in the kernel module, so passing here the
parameter to 'modprobe' does nothing but prevents to set the parameter
in the kernel command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new development branch is based on NXP's v4.14.98 BSP.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe's package is meant for packages that require NXP-specific linux
headers.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Arturo Buzarra
Javier Viguera
Isaac Hermida
Mike Engel
Gabriel Valcazar
Francisco Gil
Hector Palacios
Gonzalo Ruiz
Hector Bujanda
Jose Diaz de Grenu
Alex Gonzalez