If device is a SMARC, use SMARC properties to log in sysinfo (serial
number, variant, hardware version). If not, use SOM properties.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Read the QR serial number from /proc/device-tree/serial-number and the
MAC address from the U-Boot ethaddr environment variable.
Include digi,drm-ic in the QR payload only when present, and update the
console output and provisioning message accordingly.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Add QR code generation to sysinfo using U-Boot serial and
MAC address information, with support for both standard
and legacy payload formats.
When requested with --qr_display, show the QR code using the
most suitable backend for the running system
https://onedigi.atlassian.net/browse/DEL-9281
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Commit 99f1425340 ("image-buildinfo: Improve and extend to SDK coverage too")
in the Poky layer changes the name of the default build information file from
"build" to "buildinfo", so this commit reflects this change by adapting the
sysinfo script.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
While on it, rename the old "Firmware" variable to "DEY version", as it refers explicity to the DEY
distribution version.
https://onedigi.atlassian.net/browse/DEL-8539
Signed-off-by: David Escalona <david.escalona@digi.com>
This commit improves the sysinfo script to skip error on platforms that don't
provide some variables.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The common license file GPL-2.0 is now called GPL-2.0-only in poky, so we need
to reflect this name change to avoid errors
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit c24d1d96 ("sysinfo: adapt script after removal of deprecated fsl_otp
driver") introduced a mistake masking the SEC_CONFIG[1] bit read from the OTP.
This commit fix the read command to force it in hex format and finally match
with the mask in the script.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit c24d1d96 ("sysinfo: adapt script after removal of deprecated fsl_otp
driver") introduced support to determine if a device is closed by checking
a new boolean property on the DT for the CC8X platforms, however the CC8M
platforms use the same mechanism. This commit modifies the sysinfo script to
check also the DT for the CC8M platforms.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit cbb38440 ("meta-digi-dey: sysinfo: Add chip revision sysinfo output")
introduced a new script variable to determine the SOC revision of the module.
However this entry only is available on the CC8X platforms. This commit checks
if the entry exist and then tries to read it to avoid unexpected issues with
devices without this entry.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
- OTP section
- Use just one fixed path to the OTP nvmem device descriptor (instead
of a loop).
- Use '-v' for dumping all values with hexdump.
- TrustFence section
- For cc8x, determine if the device is closed by checking a new boolean
property on the DT: digi,tf-open|closed
- For the rest, check the SEC_CONFIG[1] bit using the new nvmem
descriptor.
- Change log from 'Device status' to 'Security status'
- Report UNKNOWN if nvmem device does not exist.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit f6a8de0067)
With the change of bsp now we have several entries under
/sys/bus/nvmem/devices/ in the CC6UL platform and we should
reduce the num of folders where the otp folder can be found.
ls /sys/bus/nvmem/devices/
bootloader
environment
imx-ocotp0
linux
recovery
rootfs
safe
update
https://jira.digi.com/browse/DEL-7082
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
The device-tree being used on a system is a very important piece of
information to debug issues. On a host machine, dtc can be used to
reconstruct the DTS used from the /proc/device-tree folder structure.
While on it, remove extra white lines at the beginning and end.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
* Check for file before using it
This just avoids the failure, on mainline access to OTP would need to be
done differently, see:
https://jira.digi.com/browse/ACL-163
* Use compatible node instead of digi,machine,name
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Bash v4.4 or higher warns when discarding NULL bytes in command substitution
output. Remove these bytes to avoid the undesired warnings.
https://jira.digi.com/browse/DEL-5588
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit modifies sysinfo tool to use the kernel symlinks for
the devices instead of using the full node path and maintain
compatibility with different kernel versions.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
If the IOExpander is not programmed but the kernel is running its driver,
the following messages will appear when running sysinfo:
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/hw_version': No such file or directory
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/fw_version': No such file or directory
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Sysinfo was showing error messages if the working directory contains any file
with .log extension.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
We have introduced new default configuration files for wireless that do
not show on sysinfo, so add them if they exist.
https://jira.digi.com/browse/DEL-3974
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
Print the HW and FW versions for the I/O Expander in the CC6UL SBC platform.
https://jira.digi.com/browse/DEL-3958
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
The OTP word read was incorrect. HW_OCOTP_CFG5 corresponds to bank 0 word 6.
https://jira.digi.com/browse/ADK4A-1129
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Print the wireless configuration as well as supplicant and hostapd version info
https://jira.digi.com/browse/DEL-3147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows to correctly read the U-Boot version when using encrypted images.
Leave the current implementation as a fallback, in case the system is using an
old U-Boot which does not populate the device tree property.
https://jira.digi.com/browse/DEL-3025
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Extend the report with more details about:
- memory usage
- all network ports (-a) with their related PIDs (-p)
- network link details (to determine if interface is up)
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The following utilities are supposed to be available on the environment's
PATH:
uptime, uname, cat, zcat, free, ps, mount, netstat, route, ifconfig, gzip
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
sysinfo is a bash script which gathers all the relevant information
from a running system on a timestamped compressed file.
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Victor Rubio Victor.RubioTorroba@digi.com
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Gonzalo Ruiz
Francisco Gil
Hector Palacios
Arturo Buzarra
David Escalona
Javier Viguera
Gabriel Valcazar
Mike Engel
Jose Diaz de Grenu
Alex Gonzalez
Alejandro Navarro
Sebastian Pastor
Isaac Hermida
Victor Rubio