The CST package requires byacc to compile, and even though this dependency is
met when building images for the target, said dependency needs to be made
explicit when the package is built for the SDK in order to avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the previous solution we would need to generate
multiple overlays for each soc_type, so if we have a
new soc type (for example the solo), we would need
to generate 3 different overlays.
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This commit fixed the sdcard generation when encryption is enabled.
In the sdcard image always is included the signed image instead of the
encrypted.
https://jira.digi.com/browse/DEL-7200
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This version supports encryption for devices with Advanced High Assurance Boot
(AHAB) capabilities. This commit also updates and simplifies Digi custom
patches.
https://jira.digi.com/browse/DEL-7175
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add running 'mmc partconf 0 1 1 1' command to the uuu scripts after
writing the new U-Boot into the internal eMMC.
This is required for blank eMMCs on CC8MN and CC8X SOMs where the
'update' command has never been run to be able to boot from eMMC.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The encryption of the U-Boot environment uses the HWID as key
modifier. The HWID was being read using the fsl_otp driver sysfs
entries and over two words. The driver is now deprecated and also
the cc8x and cc8m platforms have different number of HWID words.
This patch modifies the function that reads the HWID words by
using new entries on the device tree 'digi,hwid_X' where X is the
index of the HWID word.
It also removes the need to select CONFIG_MD5 which is already
auto-selected on sandbox_defconfig by other config switches.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit 8ced362766)
The Cortex-M7 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Nano DVK board to avoid conflicts.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Store mkimage log for every built target so it can be later used by the
signing script to create the correct CSF file for every target.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The mkimage.log file is required by the signing script to create the CSF file.
Since there is one mkimage log file per target, update the mkimage.log symlink
right before signing the imx-boot file to ensure creating the CSF with the
corresponding mkimage log for every target.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit updates to the NXP imx-5.4.24-2.1.0 BSP.
Including following changes
In M4 MCUX SDK 2.8.0, it added PMS demo for CM40 to support Partition
reboot feature besides rpmsg pingpong. So change the m40 default image
to imx8qm_m4_0_TCM_power_mode_switch_m40.bin
Build i.MX 8DXL flash_linux_m4 with V2X off
Use option V2X=NO to switch V2X off.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
imx-boot files for target flash_regression_linux_m4 fail the signature
process, so skip them while signing the rest of the targets.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When loading the wireless driver in test mode, the UTF firmware file
is loaded.
On pcie chips, the UTF file is expected to be named 'utf.bin'.
On sdio chips, the UTF file is expected to be named 'utf30.bin'.
Rename the pcie UTF file to match this requirement.
md5sum
----------------------------------------------------------
qca65X4_pcie: utf.bin -> 41cfb4e50613cd0eeb0fa99a005131bd
qca65X4_sdio: utf30.bin -> 4743dee015047752e433e69f4db89974
https://jira.digi.com/browse/DEL-7086
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add Compliance Test Limits (CTL) information for FCC, CE and TELEC
certifications to the CC8X US Board Data File.
The rest of the file (calibration, target power levels, etc.) remains
intact.
Updated file:
- bdwlan30_US.bin (MD5SUM: 100a982b33b4a2cfeb34cdea794dc6d6)
https://jira.digi.com/browse/DEL-6995
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signed imx-boot files had the '-signed' appended at the end of the file.
Add it after the file prefix instead, so it is easier to replace using an
unsigned file for a signed one just by changing the file prefix.
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The '-fmacro-prefix' option is a new GCC option introduced in gcc version 8.
To keep compatibility with previous GCC versions, remove this option from
the DEBUG_PREFIX_MAP list so nativesdk builds are able to compile this recipe.
Following is the compilation issue avoided by this patch:
| gcc: error: unrecognized command line option ‘-fmacro-prefix-map=<yocto-workspace>/tmp/work/x86_64-nativesdk-deysdk-linux/nativesdk-imx-mkimage/git-r0=/usr/src/debug/nativesdk-imx-mkimage/git-r0’
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This recipe is now built as native and nativesdk by means of the
BBCLASSEXTEND configuration.
Remove every remaining legacy native configuration since all will be covered
by the class extension.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This service is the same as the one provided by NXP, but with altered
dependencies. Start it before the kernel modules are loaded so the firmware is
ready by the time the mcp25xxfd module is loaded.
https://jira.digi.com/browse/DEL-7114
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The signing script is used for signing multiple artifacts, not just the
kernel, so rename it for a broader use.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signing with AHAB mode only requires an additional prior step, so
reuse as much code as possible.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
TRUSTFENCE_SIGN_MODE for ccimx8mn is "HAB", although the
BOOTLOADER_IMAGE_RECIPE is "imx-boot".
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
imx-mkimage is a host recipe to provide the mkimage_imx8 binaries, required
for the trustfence support with platform based on AHAB (ccimx8x). Since
these binaries are required to the sign process we need to export it in the
SDK to allow the standalone sign mode, and with that we can simplify the
mechanism to share these binaries with another recipes (u-boot, linux).
Also the do_deploy() from imx-mkimage recipe was removed to avoid overriding
the implementation from the native class and allow populating the mkimage
binaries.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 3fbd38ca ("imx-boot: build ccimx8x images for B0 and C0 silicon
revisions") added support to build images for B0 and C0 revisions,
forgetting include this support on trustfence builds.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe takes several binaries demo for the Cortex M7 CPU,
and are provided in the deploy directory.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This update is a cosmetic one and removes the RAM frequency from the SCFW
filenames. Reflect this change in the RAM_CONFIGS variable and in the uSD/UUU
installation scripts.
As a result, the imx-boot filenames will no longer have the RAM frequency
either.
https://jira.digi.com/browse/DEL-7096
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The scripts need to know the SOC's revision to be able to select the correct
imx-boot image. Modify the boot-artifacts bbclass so the renamed imx-boot files
are included in the installation .zip.
Also, bypass the SECO fw check in the uSD script so it can install future
versions that aren't recognized by U-Boot's SECO fw checking logic. The UUU
script doesn't require this bypass, since it doesn't use the Digi update
command to flash the bootloader.
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Modify the imx-seco recipe so it deploys the B0 and C0 versions of the SECO
firmware, Then, modify the imx-boot recipe so it builds every possible
combination of:
* RAM configuration
* imx-boot target (with and without M4 demos)
* Silicon revision
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Gabriel Valcazar
Hector Palacios
Mike Engel
Francisco Gil Martinez
Arturo Buzarra
Gonzalo Ruiz