Back when the ccimx6/6qp used Linux v4.9, we needed to use crda because
wireless-regdb-static wasn't supported until v4.15. Now that we use v5.4 on all
platforms, this workaround isn't needed anymore.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Starting with Linux v4.15, regulatory domains are no longer handled via CRDA,
but via the kernel and a flexible database instead. Said database is included
in the wireless-regdb-static package, which conflicts with the old
wireless-regdb package.
To accomodate for this new package, add CRDA as a dependency for ccimx6
platforms only, and incorporate wireless-regdb-static for the rest of the
platforms. Additionally, the ccimx6 kernel should inherit the
kernel_wireless_regdb .bbclass so the plaintext database is copied to the
kernel sources, but since we use the same recipe for all kernel versions and
ccimx6 platforms are not yet supported in zeus, omit this change for now.
Remove the package-base .bbappend, since only ccimx6ulstarter images include
that packagegroup and they require wireless-regdb-static, anyway.
By adding the regulatory database, we avoid delays when going to suspend,
caused by the kernel waiting for the database to appear.
https://jira.digi.com/browse/DEL-7133
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit backports the IEEE 802.11r support from the later version v1.20
and integrates it in NetworkManager v1.18 supported by Yocto 3.0 (Zeus)
https://jira.digi.com/browse/CC6UL-1110
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates support for the IEEE 802.11r protocol to operate with
fast roaming networks.
https://jira.digi.com/browse/CC6UL-1110
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bluetooth class to support the bluez4/bluez5 distro features,
was removed due to bluez4 was removed from meta-oe some time ago.
This commit simplifies the requeriments adding directly the bluez5,
instead of the intermediate bluetooth class.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Additionally:
- The handling of gpios has been swapped so 'Set low XBEE_SLEEP_RQ' is done
before 'Power cycle XBEE_RESET_N' to assure the device doesn't enter sleep mode.
- Removed ExecStop entry from systemd service since it's doing nothing.
https://jira.digi.com/browse/DEL-6424https://jira.digi.com/browse/DEL-6423
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
XBEE_RESET_N_GPIO and XBEE_SLEEP_RQ_GPIO can now be comma-separated lists of
GPIO indexes instead of just a single index. Modify the xbee-init script to
support this change and modify the sed script in xbee.bb to allow commas
in the aforementioned variables.
https://jira.digi.com/browse/DEL-6887
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Serial support to XBee cellular devices is deprecated since
the recommended communication protocol is USB, so we remove
the udev rules that supported these devices.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
WPA and P2P configuration files are basically the same between all
platforms, so we remove all duplicated files to use a common file
and modify it in the recipe logic.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The systemd class adds by default packages named ${PN} to the
SYSTEMD_PACKAGES variable, but in our case the package name is
'${PN}-init', so it needs to be added explicitly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These classes needs to be inherited so the different init services
(sysv, systemd) execute the script on boot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The previous patch was outdated, but now that we have a working PKCS11 engine
and the cryptochip supports it, update the patch with the new engine info.
https://jira.digi.com/browse/DEL-6835
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit fixes the error message when specific network scripts
are launched.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6728
This way, we assure that the openssl binary is included in the rootfs whenever
the base openssl package is included.
https://jira.digi.com/browse/DEL-6710
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit exports several internal headers and libraries
to allow link against them in user applications.
https://jira.digi.com/browse/DEL-6649
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since the original .bb file is already in the meta-digi layer, bitbake will
look inside of the bluez5-5.41 folder by default, so this line isn't needed.
https://jira.digi.com/browse/DEL-6448
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Modify bluetooth init script to use kernel module to power on/off
the bluetooth chip instead of managing it directly from sysfs.
https://jira.digi.com/browse/DEL-6615
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Also create the folders that contain the scripts attending each
dispatch event type.
https://jira.digi.com/browse/DEL-6575
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some modems take a lot of time to initialize and ModemManager won't
see them on its first scan.
This service will force a rescan 40 seconds after boot, to give
enough time for those lazy modems.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
This recipe adds a script and a related systemd service that
configures two GPIOs (user defined, or else platform-defaults) as
output and sets them to the appropriate value for initializing the
XBee socket:
- XBEE_SLEEP_RQ: is set low, for running the XBee
- XBEE_RESET_N: is set low and then high, to reset the XBee
The service triggers on the condition that the UART TTY device node
pointed to by variable XBEE_UART exists.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
On the default device tree, the MCA UART that's connected to the
XBee socket is enabled. This registers as ttyMCA0.
Add a udev rule for this path so that ModemManager checks for
modems in this serial port.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
Soften the dependencies between the services and start the bluetooth stack
regardless of the existence of a bluetooth chip. Also, update the standby
script to reflect that there is no longer a strong dependency between the
services.
https://jira.digi.com/browse/DEL-6452
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When using systemd, putting the wlan1 interface up wasn't working because it
was relying on initscripts that are no longer in the filesystem.
Add a parametrized version of the upstream hostapd service to be able to use a
configuration that's different from the default one. Also, modify the
generation of the wlan1 entry in /etc/network/interfaces to be able to use
different post-up/pre-down hooks depending on the init manager that's being
used.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This change was added to meta-openembedded layer by commit
0814df2e9179b71b5f5c99b962aca35ede1f242f.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since the version 1.12, NetworkManager enables the colors in the
terminal output by default. This pretty output is not compatible
with several terminal emulators and makes it difficult to parse
the output of the CLI commands.
This patch uses the standard linux util called 'terminal-colors.d'
to disable the colors by default in the NetworkManager CLI interpeter.
https://jira.digi.com/browse/DEL-6473
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is a user space tool to manage BATMAN advanced network interfaces.
https://jira.digi.com/browse/DEL-6466
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
systemd-tmpfiles throws warnings of /var/run being deprecated in favor of /run.
Even though this is corrected automatically, the warnings appear several times
during runtime, polluting the systemd journal.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Gabriel Valcazar
Arturo Buzarra
Hector Bujanda
Javier Viguera
Mike Engel
Hector Palacios
Alex Gonzalez