There is only one u-boot supported for each platform, so there is no
need to explicitly set the u-boot preferred version.
As a result it was needed to rework the nvram recipe which was using the
removed PREFERRED_VERSION_u-boot-dey variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of creating a new recipe for u-boot fw-utils (fw_printenv) just
bbappend the recipe in Poky.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a Consumer quad-core 1.2GHz, 4GB eMMC, 2GB DDR3, -20/+85C variant
with bluetooth and wireless, no kinetis.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Now each platform is only supported in one kernel version, so there is
no need to have multiple alsa config files per linux kernel version.
https://jira.digi.com/browse/DEL-1747
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following section configures the Audio Data Path to Voice Over UART.
//Audio - Audio main config
[H:S]0041
[H:S]0004
[H:A]01 00 00 00
The syntax is explained in the AR3002 2.2 Tag definition 1.0 document from
Qualcomm/Atheros.
Other audio sections are removed as they are not being used.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Adapt u-boot bootscript after latest changes in 'mmcdev' variable
semantics. Now the boot media device is stored in 'mmcbootdev' variable.
Also set the device tree filename depending on the hardware variant.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Support new memory chips for 'ccardimx28js'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit b7d108c35f6a26a78a4fbab399fd2c0878976a67)
Add post-installation script that runs on first boot to reconfigure the
u-boot environment depending on the media (EMMC,SD) the target is
booting from.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8486d120355d80ea8ad5864596c8486a1d3c0db2)
This is needed in the context of CC6 variants 0x7 and 0x9 (EMMC-less).
Changes:
* Do not use 'meta-fsl-arm' image generation class: removed include and
override SDCARD generation function
* Use same VFAT boot image for EMMC and SD card. The u-boot bootscript
has been adapted to be able to boot Linux from both SD and EMMC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8b8456b8fd90facd92dfc87632effa582ca60475)
Remove the current DEY variants support and framework for CC6 because in
following commits we will add support for all *hardware* variants in
just one set of DEY images for CC6.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The previous class 1 settings for the atheros bluetooth resulted in
output power higher than what is allowable in all regulatory
domains where class 1 devices are allowed on the CC6. The updated class 1
regulatory settings here reduce the maximum output power to levels
which pass when tested at an external lab.
This change resolves CCIMX6-389.
Signed-off-by: Paul Osborne <Paul.Osborne@digi.com>
Those packages are not machine specific, so there is no need to set
PACKAGE_ARCH to ${MACHINE_ARCH}.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
athtestcmd and wmiconfig are proprietary tools from Atheros. When
installed from GitHub we use prebuilt binaries because we cannot provide
the source code to the customers.
The prebuilt binaries need to be platform dependent, because the
'ccardimx28' uses soft-float binaries while the 'ccimx6' uses hard-float
binaries. Otherwise there is a failure:
root@ccimx6sbc:~# /usr/sbin/athtestcmd
-sh: /usr/sbin/athtestcmd: not found
While on it, removed the checksums for the binaries, as Yocto does
not verify checksums for local files by default, only for downloaded
files.
https://jira.digi.com/browse/DEL-1586
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8a3a124c75a885a619b41bf1e17118f1b3dec13c)
The SD card images support added a dependence to mkimage native tool.
Otherwise the build may fail with:
mkimage: not found
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With yocto 1.8 we need to pass CC and LD from yocto environment to
imx-bootlets makefile. Otherwise it fails:
arm-dey-linux-gnueabi-ld: cannot find -lgcc
make[1]: *** [output-target/linux_prep] Error 1
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 1.8 is more strict in the syntax when you append more flags to the
CFLAGS variable, because with previous yocto versions these packages
used to build fine and now fail with:
run.sstate_create_package: Syntax error: "(" unexpected
Use a different EXTRA_CFLAGS variable for our custom flags instead of
the standard CFLAGS.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The removal was added as a workaround to avoid installing a generic
asound.conf that was conflicting with our cards.
This is no longer needed as poky installs an empty asound.conf and
meta-fsl-arm overrides it with per-platform asound.conf files.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Alex Gonzalez
Javier Viguera
Paul Osborne