Now that we support the LVGL wayland backend, include the weston desktop in
dey-image-lvgl images, like we used to in older DEY versions.
This reverts commit db3e526b31.
https://onedigi.atlassian.net/browse/DEL-9925
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use placeholders and machine-configurable variables to determine systemd
behavior when receiving power key events.
By default, these are:
- short press: suspend
- long press: graceful poweroff
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit add secure storage service and helper
script to setup the secure storage at boot up.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-9891
ccimx6 was the only platform using wpa_supplicant instead of hostapd for
SoftAP configuration, requiring additional platform-specific logic.
Since SoftAP works correctly with hostapd, drop the wpa_supplicant path
and unify the AP implementation across platforms.
https://onedigi.atlassian.net/browse/DEL-9923
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit adds a retry to the swu_package_path function of
the recovery-initramfs-init script. It has been seen that
with some USB memory stick a retry is necessary to mount
the external storage device containing the SWU package.
If the SWU package file is found before the max retries
is reached the loop will be exited and the SWU installation
will start. If max retry is reached and the SWU package
wasn't found it finishes with an error.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-9908
The new image runs the local ConnectCore demo application using chromium
on the ccimx95.
https://onedigi.atlassian.net/browse/DEL-9838
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is specially required for configuring the camera
paths on the newest kernels and capture drivers.
Include it by default in all platforms that support video.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit removes the wayland backend use directly the video
interface and reduce image size. In this version the wayland
support is still not fully suport or similar how it was in the
previous verison we used.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Systemd-based systems do not use the global /etc/sysctl.conf file. Instead,
they read configuration from individual files under /etc/sysctl.d. This
change installs our sysctl settings as /etc/sysctl.d/console.conf when
systemd is enabled.
For systems that do not use systemd, the configuration file is still
installed at /etc/sysctl.conf. The CONFFILES entry is also updated.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When you create a bridge between Wi-Fi hostap and Ethernet, it's more
convenient to let the bridge take an appropriate dynamic IP from the
DHCP server, than needing to configure a manual one.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit includes a new tarball based on trustfence-fscrypt v0.2,
cross-compiled against libteec v1.0.0, to enable support for STM32MP1x platforms.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
There are several recipes in meta-digi related to features that we haven't
tested in a long time and don't appear in the DEY 5.0 documentation. Remove
them to avoid unexpected behavior.
Said features are:
* Coral TPU support (only supported in DEY 3.2)
* AWS support (removed from default images and docs in DEY 4.0)
* dey-image-tiny (hasn't been maintained since DEY 2.0)
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates the tarball to be based on libteec v1.0.0, as the previous
version was generated without the correct Trusted Application (TA) and did not
work properly.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Flutter is an open source framework for building multi-platform applications
without a graphical backend running. This commit adds support to create a new
DEY image type based on Flutter ready to use for the users.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes a new tarball based on trustfence-fscrypt v0.2,
cross-compiled against libteec v1.0.0, to enable support for STM32MP platforms.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates secure boot support based on the STM32 MPU Ecosystem v6.0
and integrates support for the ConnectCore MP2 platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
hwlatdetect is intended for monitoring hw latency on real time systems
that rely on SMI interrupts (mainly x86 machines).
As our devices that not support it, do not include the tool.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The systemd recipe was recently upgraded from v255.13 to v255.17 in poky and
our patches no longer applied correctly. Adapt them to prevent do_patch()
errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We haven't included fbtest in our default images for a long time. Also, its
lone dependency, microwindows, is broken due to an outdated SRC_URI that no
longer exists. Remove both recipes
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the target will immediately power off as soon as the power button is
pressed, even before letting go of it. This customization is already being made
for ccmp1 platforms, so make it common for all stm32mp platforms.
https://onedigi.atlassian.net/browse/DEL-9190
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In the previous commit, removing the qt6 addons packagegroup has the unintended
side effect of removing all gtsreamer packages from the SDK, presumably because
they were being implicitly pulled in by one of the many qt6 packages. Add our
dey-gstreamer packagegroup to dey-toolchain to recover said packages.
Note that the set of packages we include with our packagegroup is much bigger
than the set that was being pulled in by the qt6 addons, but the size increase
is small compared to the increase caused by the qt6 addons. In the
ccimx8x-sbc-pro toolchain, this increases the installer script's size by around
84 MiB.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This slightly increases the SDK's size, but it adds packages that are required
for common use cases such as integration with weston/x11.
https://onedigi.atlassian.net/browse/DEL-9297
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Our new dey-toolchain recipe was missing the logic needed to create the
"dey-version" file in the SDK's installation path. Move this logic from the
dey-image bbclass to a new bbclass meant exclusively for SDK logic, and inherit
it where needed. While at it, move other common SDK modifications to this
class.
https://onedigi.atlassian.net/browse/DEL-9297
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variable is used to determine the types of complementary packages included
in the SDK: dbg-pkgs, dev-pkgs, doc-pkgs, src-pkgs...
We added staticdev-pkgs to this variable back in Yocto 2.0 (45de4d6943), but
instead of appending it to the original list, we redefined it with its original
value ("dev-pkgs dbg-pkgs") plus "staticdev-pkgs".
However, the default value of SDKIMAGE_FEATURES in poky has changed over time:
* Starting in Yocto 2.3 (eb345ca720e5), doc-pkgs is included if
"api-documentation" is in DISTRO_FEATURES. We don't include this feature
by default, but if a customer were to include it manually, the doc
packages wouldn't get included in their custom SDKs.
* Starting in Yocto 2.7 (ba3aa5311291), bitbake changed the default
PACKAGE_DEBUG_SPLIT_STYLE value so debug packages get split in two: one
for binaries with debug symbols and another for the source code. In turn,
src-pkgs was added to the default SDKIMAGE_FEATURES so that SDKs wouldn't
change behavior, but since we overwrite the default value, we aren't
including src-pkgs in our SDKs, only dbg-pkgs.
* Any future changes would be ignored as well, which could potentially lead
to unexpected behavior.
Make sure we don't overwrite the default SDKIMAGE_FEATURES value to include
src-pkgs in our SDKs, as well as the optional doc-pkgs logic. Also, include
staticdev-pkgs in our recently created dey-toolchain recipe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For many DEY releases, we've been providing one SDK per image type, per
platform. In the case of graphical images, this was redundant for a few
reasons:
* Most of the SDK's contents were identical, save for the specific packages
in each image (qt, webkit, lvgl...) and their dependencies. With each SDK
occupying over 1.5 GiB, this results in a lot of storage space overhead
in our servers.
* For some images, namely webkit and lvgl images, their respective SDK
packages aren't necessary for the expected development use cases, so it's
perfectly possible to use the qt SDK instead.
Create a separate recipe for a general-use SDK. Said toolchain includes qt5/qt6
packages by default, except for headless platforms. The advantages of this are:
* We only provide one prebuilt SDK per platform, all with the same base
name. The SDK should cover most if not all of the expected development
use cases, and customers are still able to create their own custom SDKs
if needed.
* Having a separate recipe for the toolchain, not tied to a specific image
type, allows us to fine tune its contents without affecting images and
their recipes. With time, we can incorporate new packages as needed.
https://onedigi.atlassian.net/browse/DEL-9297
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
If the power domain is kept on in suspend, do not disable the Bluetooth as
no new initialization is needed.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
In single boot layout the ccmp1 platforms have two UBI devices:
ubi0: Contains uboot_config_r, linux, and recovery.
ubi1: Contains rootfs, data, and update.
The regular expression used for the update partition needs
to be updated to include the ubi1 device, ensuring proper
handling of the update partition.
https://onedigi.atlassian.net/browse/DEL-9387
Signed-off-by: Francisco Gil francisco.gilmartinez@digi.com
Optee client library updated its major version due to a ABI breaking
change:
3eac340a78
This update provides a new build of the trustfence-fscrypt app, linking
to the new version of libteec.
https://onedigi.atlassian.net/browse/DEL-9341
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Upon a p2p link, an auxiliar iface "p2p-iface-[0-9]" is created. If
it is not specified to the wpa_cli command, a different interface may
be used (eg, wlan0), leading to a failure.
Make the script more robust by detecting the new interface.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Commit 998598415a moved this logic to the
trustfence.bbclass file, but in doing so, it removed the TRUSTFENCE_SIGN check
it used to have. The check is needed for two reasons:
* The signing of SWU packages only occurs when TRUSTFENCE_SIGN is enabled, so
there's no need to copy the key if it's disabled
* When building a project from scratch that has Trustfence enabled but
TRUSTFENCE_SIGN disabled, a PKI is never generated and the key doesn't exist.
Because of this, the key won't be found and an error will occur. Note that
if your project is already pointing to a populated PKI, the error won't
happen, only if there's no PKI to begin with.
Although the PKI is guaranteed to exist by the time the rootfs is populated,
make sure to check that it has been properly generated and create it if it
doesn't exist. This logic depends on the trustfence-gen-pki.sh from
trustfence-sign-tools-native, so add it as a dependency for
dey-image-recovery-initramfs. The dependency is already there for another
feature in the dey-image recipes, so simply reflect this new dependency in a
comment.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 8e52c27d5a8e8071c3a17754e91c1819bcceee15)
When it comes to inheriting this qt bbclass, we used to do so for every image
inheriting the "dey-image" bbclass that had "dey-qt" in its IMAGE_FEATURES. In
theory, only dey-image-qt follows these requirements.
However, starting in DEY 3.0, we added support for multiple graphical images,
all of them sharing the same characteristics save for a defining IMAGE_FEATURE.
To implement this, all images have the IMAGE_FEATURE "dey-${GRAPHICAL_CORE}",
with GRAPHICAL_CORE having a default value of "qt" and being overwritten in
each image recipe with its respective value: "qt", "webkit", "crank" or "lvgl".
The problem is that, when checking whether to inherit populate_sdk_qt[5/6] or
not, it's still very early in the recipe parsing process and GRAPHICAL_CORE
still has its default value of "qt", meaning the "dey-qt" IMAGE_FEATURE is
considered present for all graphical images. In turn, this results in qt
packages being included in all graphical image SDKs.
Move the inherit clause to the dey-image-qt recipe and remove the check so
that the qt packages only get installed in the dey-image-qt SDK.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 593ff866578e6d341ec4d8a09581922c6390e2a4)
Commit 99f1425340 ("image-buildinfo: Improve and extend to SDK coverage too")
in the Poky layer changes the name of the default build information file from
"build" to "buildinfo", so this commit reflects this change by adapting the
sysinfo script.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These recipes install binaries inside of /sbin, which causes QA errors when
usrmerge is enabled in DISTRO_FEATURES. Said feature is now required for
Yocto 5.0's version of systemd, so keep using the same versions of the tools
and simply move the binaries to /usr/sbin if needed.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
While at it, add the "Upstream-Status" tag to the patches to avoid QA errors
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
A preprocessed *.h Digi logo file was used for the psplash.
The psplash recipe from Poky admits a PNG file as input and
does the conversion automatically.
Use a Digi PNG logo and set it using SPLASH_IMAGES variable.
This way, it is easier for users to substitute with their own
logos.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9239
This commit fixes a build issue by including the procps recipe which also
installs the sysctl.conf file. Since adding this config file in base-file
recipe is something custom from DEY, we include this file only for "dey"
distribution to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some wifi-related functionality was enabled on ccimx93 overrides. The
ccimx91 also needs this functionality but it was not being applied as
the overrides were only for ccimx93.
Generalize the overrides for ccimx9.
https://onedigi.atlassian.net/browse/DEL-9214
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes build issues with optimization=plain.
commit: ec35091c8a358aacbf787afb2bfab6a0996031ed
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Francisco Gil
Gabriel Valcazar
Hector Palacios
Mike Engel
Javier Viguera
Arturo Buzarra
Isaac Hermida