rename interface sta_name to be "wlan0" instead of "mlan0", so it keeps
compatibility with other platforms.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Check if the bluetooth-init service is running before going to suspend,
just in case has stopped or disabled it on purpose.
https://onedigi.atlassian.net/browse/DEL-8497
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Otherwise the build fails, with:
ERROR: dey-image-qt-1.0-r0 do_rootfs: The following packages could not be configured offline and rootfs is read-only: ['100-e2fsprogs-mke2fs']
https://onedigi.atlassian.net/browse/DEL-8495
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Masking the extended advertising flag makes the hcitool lescan work, but
triggers functionality problem such as bluetoothctl scanning or extended
advertisement not working.
Do not mask it, so use bluetoothctl scan instead of hcitool lescan to discover
LE devices.
This reverts commit ac1e4633fb.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We need to take in account if the IW612 chip (WiFi/Bt) is going to be powered
off on suspend state. In such a case, we need to unload the driver modules and
restore the expected tty speed for Bluetooth, so that functionality is restored
back on resume.
https://onedigi.atlassian.net/browse/DEL-8489
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The BT chip for the ccimx93 cannot be turned off, nor can it be re-uploaded.
Therefore, we need to set some conditions to assume that it is going to be
attached correctly. The changes in this script take care of that.
Upon the first attachment, the rate is set to 3M, and future uses will always
be done at this rate. If, for any reason, it was not stopped and the chip is
already attached, do nothing.
https://onedigi.atlassian.net/browse/DEL-8464
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This fix is needed for bluez-5.65 version.
We can drop it when using a newer version.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The enabled options are mainly for AP mode, which improve the P2P
performance when the P2P node behaves as an AP, it is, as P2P GO.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use the specific hcitool vendor command to set the BT mac address.
It is a custom vendor command (0x3f), and the field is 0x0022.
The BT address is passed from last octet to first octet.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Sync the defconfig to version 2.10.
Additionally, add support for new features, such as:
* ACS (auto channel selection)
* 802.11AX (Wi-Fi 6)
* SAE (WPA3 Personal)
* SUITEB192 (WPA3 Enterprise 192 bits)
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Codeaurora was retired on April 2023.
Fix bbappends to point to their new location on Github.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Cloud Connector configuration file sets:
* 'edp12.devicecloud.com' as the URL to connect to (this end point uses client
certificates)
* '/mnt/data' as the directory to store downloaded certificates, now that
this is also available in emmc platforms (see
62d937df42)
This commit:
* reverts a0842cbcfd to keep
'edp12.devicecloud.com' URL that uses certificates for ccimx8m platforms.
* reverts fd94f10c0b since now the cloud connector
configuration file sets '/mnt/data' as the place to store downloaded
certificates, so no need to modify it for ccmp1 platforms.
* It also configures '/etc/ssl/certs' as the certificates directory for cc6ul
devices. Although by default, these devices are connecting to
'remotemanager.digi.com' that not uses certificates, we prefer to use an
existing directory in that setting. See commit
063a946e7c.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
'environment' partition is not available in the ccmp15.
The solution suggested is read the "/proc/mounts" and check if the 'rootfs' is
'ubifs' mounted.
Related to commits 7c07b15370 and
678eaaf0fc4ce74e67682387e3465eb29659bd47
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit adds a new function to get the active system in a dualboot device
without using 'active_system' U-Boot variable.
This way the script always knows the real active system even when the variable
'active_system' has the value of the next boot active system, for example, after
performing a 'update-firmware --swap-active-system'.
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This option combined with '-a' ('--active') only prints the active block: a or b
The purpose an output to be consumed by other scripts or programs.
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Check the second ('/') and third ('ubifs') field of 'rootfs' entry in
'/proc/mounts' as the first one ('rootfs_a' or 'rootfs_b') may be changed by
custormers:
root@ccmp15-dvk:~# cat /proc/mounts
ubi0:rootfs_b / ubifs rw,relatime,assert=read-only,ubi=0,vol=5 0 0
[...]
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This is required for the firmware update using Digi Remote Manager. The reboot
is commanded by the server, it that does not happen the update process is not
ended for DRM.
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
The bluetooth FW for the IW612 is loaded together with WiFi FW, so there
is not BT FW file as in our other products.
In order to use the BT, it is a requirement to load the WiFi FW, so
ensure that the service is started after the load of the system
modules.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Instead of changing POKY_DEFAULT_DISTRO_FEATURES, do the distro features
configuration directly in the DISTRO_FEATURES variable. Also, add a couple
of variables (MACHINE_DISTRO_FEATURES_ADD/REMOVE) that allow machines
for extra tweaking the distro features.
While on it, clean up some distro features:
- pulseaudio: already added by DISTRO_FEATURES_BACKFILL
- bluez5, splashscreen, initrd, gplv3: not used (dead code)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The stand-alone signing script 'trustfence-sign-artifact.sh' checks
if a valid PKI tree exists (by checking the existance of four SRK
files) and if they don't, it calls trustfence-gen-pki.sh (which is
a wrapper over different generators (for HAB or AHAB) to create one.
Recipes such as 'dualboot' or 'recovery-initramfs' may need to call
openssl functions over the PKI tree. These recipes do not currently
generate the PKI tree; they expect it to be already in place.
This might not be the case if the trustfence-sign-artifact.sh script
has not been called yet.
Originally, a fake dependency on virtual/kernel recipe was made to
force it, but it doesn't quite work since the calling only happens
on deploy() while regular DEPENDS doesn't wait for this task.
If the PKI does not exist, a recipe that requires the PKI tree will
fail.
The solution is to create a function on the trustfence.bbclass that
allows any recipe to check for the existance of a PKI tree and
generate it if it doesn't exist. This is repeated inside the
trustfence-sign-artifact.sh, but it needs to be in both places
because this script must work stand-alone.
The generation of the PKI tree takes some seconds so this commit
adds a lock dir to prevent race conditions when called from
different recipes.
It also removes the fake dependency on virtual/kernel and adds a
dependency on trustfence-cst-native (which is the recipe that
provides the PKI generation tool).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8430
(cherry picked from commit 6a8bf7afff)
The Poky layer defines a default journald conf file that allows log files on
the file system to grow to a maximum of 64 MiB. However, this size on some
platforms is impossible to address, so this commit reduces the maximum size for
runtime logs to 4 MiB.
https://onedigi.atlassian.net/browse/DEL-8419
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
(cherry picked from commit bdece7102b)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit modifies the cloud connector configuration to use
'remotemanager.digi.com' URL since it does not use certificates for the
connection.
'edp12.devicecloud.com' only allows connections with certificates.
The certificate is downloaded during the first device connection to DRM and
stored in '/etc/ssl/certs' directory inside the 'rootfs' partition.
Following connections must use this certificate.
After a firmware update 'rootfs' partition is re-programmed (standard boot)
or changed to use the corresponding partition of the other block (dual boot). In
any case the certificate downloaded is not available anymore, so the device is
not able to reconnect.
Currently there is no a 'immutable' partition to store the certificate, that is,
a place where the certificate is not removed during a firmware update and can
be used by the cloud connector (similar to the 'data' partition on a ccmp1)
Related to commit 063a946e7c.
https://onedigi.atlassian.net/browse/DEL-8400
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
By launching in system mode it is possible to play music from a shell using
pulseaudio. With change all platforms and images (with or without graphical
support) have pulseaudio working.
https://onedigi.atlassian.net/browse/DEL-8417
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
With platform overrides we need to use ':append' operand. Otherwise, we
are overriding the previous content of the variable and not adding to it.
In this case, for example, we removed some postprocessing functions that
allow SSH into the device with an empty password.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the patch series for wpa-supplicant and hostapd v2.10,
based on the Murata release imx-kirkstone-fafnir_r1.0 that matches with the
Cypress Linux WiFi Driver (FMAC) release v5.15.58-2023_0222
https://onedigi.atlassian.net/browse/DEL-8407
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit creates a new launcher group in the '/etc/xdg/weston/weston.ini' to
have access to the QT cinematicexperience.
This is done for QT5 (ccmp15, ccimx8mm, ccim8mn) and QT6 (ccimx93).
https://onedigi.atlassian.net/browse/DEL-8379
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Isaac Hermida
David Escalona
Javier Viguera
Hector Palacios
Tatiana Leon
Arturo Buzarra
Francisco Gil