The final product will be called "Digi Embedded for Yocto" or DEY for
short.
This commit renames all relevant files.
https://jira.digi.com/browse/DEL-474
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Fix the kernel wireless configuration fragment, and add a couple of kernel
patches to set up the mmc0 interface to be used with the wireless and
remove an incorrect pin configuration.
There are similar patched to this on the gateways/master branch related to
the vehicle bus adapter product.
meta-digi-arm/conf/machine/cpx2.conf
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Mostly cosmetic changes to clear it a bit so customers can use it as
documentation for what variant they need to configure in their projects.
Also a couple of minor fixes: 'ext-eth' typo and duplicated 'e' variant
for ccimx53js.
https://jira.digi.com/browse/DEL-460
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Running:
bitbake -c cleanall packagegroup-machine-base
was failing due to those trailing backslashes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The previous "+=" format was doing a complete variable override instead
of an append. Features like usbhost or usbdevice were disappearing.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
I have split the machine configuration in two:
-The module machine configuration include, for example ccimx53.inc
-The machine configuration (for example cimx53js.conf) which includes
the variant configuration.
This will allow for customers to create their own machine keeping the
module include file.
The variant can be configured in the local.conf file with a
MACHINE_VARIANT variable.
The variant names are made up of the interface initials as follows:
w: wifi
e: externel ethernel
b: bluetooth
1: 1-wire
a: accelerometer
g: GPU
v: VPU
128: 128MB RAM
4k: 1024MB NAND (only for MX51 JTAG flash)
For details regarding the supported variants, each machine configuration
file contains a comment with a variants table.
https://jira.digi.com/browse/DEL-330
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Remove the machine rdepends and move to del-wireless which is only
included for the wifi machine feature.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Not yet finished as not all the cpx2 variants support wireless.
This has to be enabled per-variant.
https://jira.digi.com/browse/DEL-134
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Do not generate them until they are properly tested and working.
Fixes https://jira.digi.com/browse/DEL-192
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The del-image-minimal will included the graphical acceleration libraries
if the machine supports accel-graphics.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The del-examples-sahara now depends on the kernel modules it needs to
work and these are autoloaded at boot.
Fixes DEL-274.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For this the CCIMX51 and CCIMX53 kernels are configured to build the
mma7455l module and it is included as a dependency of the del-examples-
accelerometer application.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
So they don't depend on the machine files from meta-fs-arm layer.
This allows to override some settings in project's local.conf file.
https://jira.digi.com/browse/DEL-219 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Just a cosmetic name change for the merged wired and wireless platforms.
This and related commits fixes https://jira.digi.com/browse/DEL-188.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This fixes a bug in 'ccardxmx28js' where the wpa_supplicant was using
the wrong driver 'wext' instead of the 'nl80211' (for atheros)
https://jira.digi.com/browse/DEL-220 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
U-Boot has a set of pre-defined make targets per platform that allow
to configure u-boot for different variants (128sdram,4Kpage,dbg etc.)
This change allows to use a UBOOT_CONFIG_VARIANT variable in your
local.conf file to choose which variant to build.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The ConnectCard needs a bootstreamed (.sb) u-boot to boot from flash. This
is flashed using u-boot.
This changes compiles a bootstream u-boot image. The bootlets are compiled
separately and it's U-Boot's Makefile that calls elftosb to generate the
final bootstream.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This package contains firmware files for the MXS Digi family (Embedded and
boxed products).
Now it contains the bluetooth binary firmware files.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
It will be included in all machines that include the bluetooth feature,
currently the ccardxmx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Alex Gonzalez
Javier Viguera
Francis Sreeves