The region code is programmed in the OTP bits. We want to allow to be able to
override this behavior by setting the new value as a property in the device
tree called "regulatory-domain".
This can be done by setting the variable "regdomain=<code>" in uboot or well
by defining that entry in the device tree.
https://jira.digi.com/browse/DEL-2799
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The country region is programmed in the OTP bits. Based on that value we need
to load the firmware file for the specific country region.
https://jira.digi.com/browse/DEL-2774
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We are including two firmware files: one for setting the country to US and the
other one to set it to the World Wide Roaming region (SKU 0060).
https://jira.digi.com/browse/DEL-2774
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
TRUSTFENCE_SIGN can be defined to "0" to explicitly disable uImage sign and
encryption.
https://jira.digi.com/browse/DEL-2803
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This device tree file corresponds to StarterBoard with ID=129
which corresponds to smart part number CC-WMX6UL-START.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The correct U-Boot branch to be used with dey-2.0/master is v2015.04/master, as
it contains the latest development changes (just like dey-2.0/master).
This reverts commit 728619a5bc.
After commit b0a766eafc8 in the U-Boot repository, both signed and
encrypted images will be generated. Copy both of them to the deploy folder
https://jira.digi.com/browse/DUB-642
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This allows to automatically create a secure PKI tree without user
interaction.
https://jira.digi.com/browse/DUB-618
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NXP Code signing Tool for the High Assurance Boot library is needed for
signing and encrypting different artifacts (U-Boot image, uImage, ...).
As the CST cannot be included in DEY, the user needs to download the
tarball and add it to the recipe folder.
https://jira.digi.com/browse/DUB-618
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
To build the CC6UL boot image, the u-boot and linux images need to be
already deployed. Also the native mtd-utils package needs to be
available in the sysroot.
Make all this dependences explicit for deterministic reproducibility.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
U-Boot environment on the CC6UL NAND is located at partition /dev/mtd1:
- original copy is located at offset 0 in the partition
- redundant copy is located 1 erase block (128K) after the original copy
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2552
At the moment there is no support for rootfs encryption for the CC6UL,
so there is not a ramdisk in the boot image. But with the initial
addition of TF support, the u-boot boot script was being on-the-fly
updated for TF regardless of the platform, making the CC6UL unable to
boot when TF was enabled.
This commit fixes the problem, by just changing the u-boot boot script
when TF is enabled only for the CC6.
https://jira.digi.com/browse/DEL-2754
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
This change should be only temporary until it gets upstream.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
When Trustfence is enabled, this adds a dependence on the TF initramfs,
so it's built and added to the boot image.
It also modifies the u-boot boot script on the fly, to boot correctly
using the Trustfence initramfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The external module revision has been upgraded in meta-fsl-arm, thus
refresh the patches so they apply cleanly.
https://jira.digi.com/browse/DEL-2305
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The size of the destination partition (linux) is around 14MiB so the
max-leb-cnt must be reduced compared to the one used for the rootfs
partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2697
This creates a UBIFS file with the kernel, device tree files, and U-Boot
bootscripts generated by Digi Embedded Yocto.
The resulting image can be then programmed into the boot (linux) partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2697
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
The u-boot-dey recipe is now fully shared by ccimx6 and ccimx6ul platforms
so we can remove the platform-specific appends.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The setting of 'bootcmd' in the script was done using single quotes, which
doesn't expand variables. As a consequence the following variables must
be defined again (during the execution of the second part of the script):
- mmcdev
- INSTALL_LINUX_FILENAME
- INSTALL_ROOTFS_FILENAME
This patch changes the single quotes with double quotes, so that these
variables are expanded during the setting of 'bootcmd' with the values
assigned at the begining of the installation script (notice these are
not dynamically generated so there is no risk to expand them).
At the same time we need to escape with a backslash:
- double quotes containing strings
- variables that we don't want to expand (like the return value $?)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add semi-colons to instructions inside 'setenv' commands
- Remove semi-colons in instructions where they are not needed (for
consistency with the rest of instructions)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
By default the driver was being compiled with debug messages. Disabled it
but leave the option there so it can be enabled by user.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit will add the cryptodev module to the CC6UL kernel to use
the CAAM from user space through this device.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2719
Do not compile the kernel for supporting the static regulatory domain
but force the system to do that by using crda.
https://jira.digi.com/browse/DEL-2539
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The root filesystem can have installed the busybox modprobe implementation or
the kmod modprobe implementation.
Check the version installed and compound the modprobe arguments.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add recipe kernel-module-qualcomm to compile kernel module externally with all
the patches for kernel 4.1.15.
https://jira.digi.com/browse/DEL-2653
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We compile those modules as built in to avoid a mismatch
between the current kernel version and the wlan.ko module.
https://jira.digi.com/browse/DEL-2653
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Isaac Hermida
Javier Viguera
Diaz de Grenu, Jose
Hector Palacios
Alex Gonzalez
Mike Engel