This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Increase the timeout from 90 to 120s since it's a large image
and it may take more time on different NANDs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The U-Boot environment resides on a UBI volume. The uuu script
relies on the environment to save part of the commands that
U-Boot needs to execute after reboot in the middle of the
installation. If the UBI volume 'uboot_config' does not exist
the installer fails.
This commit:
- Creates a function -on the uuu script only- for obtaining
the result of running any U-Boot command (0=success, 1=error).
- Checks the existance of 'uboot_config' volume.
- Runs 'ubivolscript' script to create the UBI volumes layout
that generates the environment volume if it doesn't exist.
- Increases the timeout for running the 'ubivolscript' since
there are occasions in which 'ubi part' (which is part of the
script) takes more time (if it cannot find the fastmap).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit b8d46f01 ("read_only: create folders in build time") creates
unconditionally default folders in spite of we are in a read-only filesystem or
not, however there are different models (dual boot, single boot..) where these
partitions exist or not, so this commit only creates these default partitions
for a read-only filesystem.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit allows to mount only the linux partition active in read-only mode.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
According to udev documentation running programs that access to mount/umount
filesystems is not allowed due to the default sandbox that is enforced on
systemd-udevd.service, so on systemd systems we must to use systemd-mount
binary instead of mount. Also systemd-mount does not support mount ubi devices
by volume name, so we need to use the absolute device path.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the extra machine specific configuration files for udev on
ccmp1 platforms to allow, for example, automount storage devices.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
By default ccmp1 platforms have dualboot mode by default, however the required
boot script was added to ccmp15 platform only, so this commit fixes it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The first time the 'dualboot' variable is tested it is directly run in
the script and doesn't need to escape the special characters.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When Dual Boot is not enabled, 'rootfsvol' variable must point to the
single boot system rootfs partition 'rootfs'.
Explicitly set this value. Otherwise the script relays on the default
rootfsvol value, which may be a Dual Boot partition.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
meta-freescale updated the base recipe and that broke the build:
ERROR: No recipes in default available for:
meta-digi-arm/dynamic-layers/freescale-layer/recipes-bsp/firmware-imx/firmware-imx_8.16.bbappend
The differences in our bbappend are simple enough that we can make a
version agnostic bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
For platforms with a FIP artifact, ignore U-Boot artifacts and instead
add to the installer zip file the FIP artifact and the ATF artifacts.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On the CCMP1 SOMs, we only consider a single system partition called UBI,
with many UBI volumes.
The variable 'singlemtdsys' allowed to change between this and
a system with multiple MTD partitions with one UBI volume each
(old approach on CC6UL).
This commit removes the variable and uses the logic as if it was set.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Use the latest 2AE NVRAM file from the master branch. This file improves
the EVM performance for the 2AE murata module.
MD5SUM:
- cyfmac4373-sdio.2AE.txt: 6301804650847946c79797387eda9c7a
https://onedigi.atlassian.net/browse/DEL-7936
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add extra configuration 'CFG_STM32_BSEC_WRITE=y' to the make line to
enable OTP write support.
https://onedigi.atlassian.net/browse/DEL-8074
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
These are available in 'meta-freescale'.
The only difference is that meta-freescale's recipes deletes de SDMA
firmware so the generic one provided by linux-firmware package is used.
We create a minimal bbappend to use the NXP provided SDMA firmware.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds Bluetooth Vulnerability CVE-2019-9506
resolution to the firmware file.
CVE-2019-9506 is a Bluetooth key negotiation vulnerability.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7134
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reset the FW files to release r00006.3.470144.2a
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-bsp/firmware-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-kernel/kernel-module-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Hector Palacios
Arturo Buzarra
Mike Engel
Gonzalo Ruiz
Francisco Gil
Isaac Hermida