Using module-detect there are some audio reverb problems. Reverting that commit
will make pulseaudio use module-udev-detect again instead, which takes longer
to initialize but does not have that problem.
This reverts commit e021f738ee.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
When module-alsa-sink is used, the audio is sometimes heard with
reverb. We will go back to module-udev-detect, so the functionality
introduced in the commit being reverted won't longer work.
This reverts commit fca507d316.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Using module-detect there are some audio reverb problems. Reverting that commit
will make pulseaudio use module-udev-detect again instead, which takes longer
to initialize but does not have that problem.
This reverts commit e021f738ee.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
When module-alsa-sink is used, the audio is sometimes heard with
reverb. We will go back to module-udev-detect, so the functionality
introduced in the commit being reverted won't longer work.
This reverts commit fca507d316.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
This change should be only temporary until it gets upstream.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Add a couple of bluez patches: one for increasing the number of connection
showed with "hcitool con" command and remove "refresh" option in hcitool
help that is not supported.
The qca6564 chip can support more than 10 simultaneous BLE connections.
https://jira.digi.com/browse/DEL-2735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
qtwebengine does not support armv5 platforms (for example ccardimx28js),
so we need to restrict that package to the ccimx6sbc
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When Trustfence is enabled, this adds a dependence on the TF initramfs,
so it's built and added to the boot image.
It also modifies the u-boot boot script on the fly, to boot correctly
using the Trustfence initramfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe builds the initramfs image that is used to boot from an
encrypted rootfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package adds some files needed by the trustfence initramfs and that
are not included in other packages.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
lvm2 package provides some user-space tools, but also some dynamic
libraries: libdevmapper, libdevmapper-event, etc.
This commit allows to package the LVM2 libraries in a different package
than the LVM2 user-space tools. This way other user-space tools (e.g.
cryptsetup) that runtime depends on the LVM2 libs can only add that libs
package to the rootfs, instead of the whole LVM2 utilities.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The external module revision has been upgraded in meta-fsl-arm, thus
refresh the patches so they apply cleanly.
https://jira.digi.com/browse/DEL-2305
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The size of the destination partition (linux) is around 14MiB so the
max-leb-cnt must be reduced compared to the one used for the rootfs
partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2697
This creates a UBIFS file with the kernel, device tree files, and U-Boot
bootscripts generated by Digi Embedded Yocto.
The resulting image can be then programmed into the boot (linux) partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2697
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
The u-boot-dey recipe is now fully shared by ccimx6 and ccimx6ul platforms
so we can remove the platform-specific appends.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The setting of 'bootcmd' in the script was done using single quotes, which
doesn't expand variables. As a consequence the following variables must
be defined again (during the execution of the second part of the script):
- mmcdev
- INSTALL_LINUX_FILENAME
- INSTALL_ROOTFS_FILENAME
This patch changes the single quotes with double quotes, so that these
variables are expanded during the setting of 'bootcmd' with the values
assigned at the begining of the installation script (notice these are
not dynamically generated so there is no risk to expand them).
At the same time we need to escape with a backslash:
- double quotes containing strings
- variables that we don't want to expand (like the return value $?)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add semi-colons to instructions inside 'setenv' commands
- Remove semi-colons in instructions where they are not needed (for
consistency with the rest of instructions)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
By default the driver was being compiled with debug messages. Disabled it
but leave the option there so it can be enabled by user.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The ccimx6ul or ccardimx28 do not have hdmi interface, so do not install the
hdmi hotplug script.
https://jira.digi.com/browse/DEL-2654
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The TRUSTFENCE_UBOOT_DEK_SIZE Yocto macro maps to the UBOOT_DEK_SIZE U-Boot
Kconfig entry, which is defined as a choice entry. This makes necessary
to explicitly define the choice Kconfig entry for the configuration to
work.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicitly disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This commit will add the cryptodev module to the CC6UL kernel to use
the CAAM from user space through this device.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2719
The following utilities are supposed to be available on the environment's
PATH:
uptime, uname, cat, zcat, free, ps, mount, netstat, route, ifconfig, gzip
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit changes the CONFIG_CCIMX6SBC_CONSOLE_ENABLE_GPIO_NR define
into a platform independent setting.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2641
Do not compile the kernel for supporting the static regulatory domain
but force the system to do that by using crda.
https://jira.digi.com/browse/DEL-2539
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The root filesystem can have installed the busybox modprobe implementation or
the kmod modprobe implementation.
Check the version installed and compound the modprobe arguments.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The power regulator connected to the qca6554 chip is always on, which causes
the Bluetooth part to not work correctly after a software-reset.
This commit asserts momentarily the BT_EN line during the start-up sequence
to reset the Bluetooth controller so that it is in a predictable state after a
reset.
https://jira.digi.com/browse/DEL-2623
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add recipe kernel-module-qualcomm to compile kernel module externally with all
the patches for kernel 4.1.15.
https://jira.digi.com/browse/DEL-2653
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We compile those modules as built in to avoid a mismatch
between the current kernel version and the wlan.ko module.
https://jira.digi.com/browse/DEL-2653
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Isaac Hermida
Diaz de Grenu, Jose
Alex Gonzalez
Javier Viguera
Hector Palacios
Mike Engel