OpenEmbedded/Yocto BSP layer for Digi's ConnectCore platforms
=============================================================

This layer provides support for Digi's ConnnecCore platforms for use
with OpenEmbedded and/or Yocto.

This layer is based on the following Yocto layers (Danny):

git://git.yoctoproject.org/poky 		 e89f812a0af56beda951c1dce6113a61d6db8cda
git://git.yoctoproject.org/meta-fsl-arm          869452daf4fe085d5013905f6a5a6584a0e3a56e
git://github.com/openembedded/meta-oe.git        c02834a7cc5fda525c7ebeec545625233bab4cb5


Digi's license agreements
-------------------------

All software is covered by Digi's general EULA and Digi's Open Source
EULA. To have the right to use the software in your images you need to
read and accept both EULAs at the DIGI_EULA and DIGI_OPEN_EULA files.

In order to accept them, you should add, in your local.conf file:

ACCEPT_DIGI_EULA = "1"
ACCEPT_DIGI_OPEN_EULA = "1"

Freescale's license agreeements
-------------------------------

Some platforms depends on libraries and packages that are covered by
Freescale's MMK EULA. To have the right to use those binaries in your
images you need to read and accept the EULA at the FSL_MMK_EULA file.

In order to accept it, you should add, in your local.conf file:

ACCEPT_FSL_MMK_EULA = "1"

Support
-------

This layer is provided 'as is' with no guarantee. However, some support
may be available from support@digi.com