#CYW955513SDM2WLIPA_TAG215 #802.11ax 1x1 Tri-Band HE20 WiFi 6/6e + BT/BLE 5.2 Combo with SDIO/SPI interface #test1 NVRAMRev=$Rev: 53b0a7a3628d2aeaac03f69abc9ffd286740aa76 $ sromrev=11 boardrev=0x1530 boardtype=0x0904 boardflags=0x00400001 boardflags2=0x00800000 boardflags3=0x40000100 #boardnum=57410 macaddr=00:90:4c:2e:c3:05 #Regulatory specific ccode=0 regrev=0 # Board specific vendid=0x12be devid=0xbd3e manfid=0x2d0 antswitch=0 pdgain5g=0 pdgain2g=0 aa2g=1 aa5g=1 agbg0=2 aga0=2 extpagain5g=2 extpagain2g=2 rxgains2gelnagaina0=0 rxgains2gtrisoa0=13 rxgains2gtrelnabypa0=0 rxgains5gelnagaina0=0 rxgains5gtrisoa0=7 rxgains5gtrelnabypa0=0 rxgains5gmelnagaina0=0 rxgains5gmtrisoa0=7 rxgains5gmtrelnabypa0=0 rxgains5ghelnagaina0=0 rxgains5ghtrisoa0=7 rxgains5ghtrelnabypa0=0 # ==== RSSI related parametes start ============================================================== # 2G-Core0 [20MHz, 40Mhz] rssicorrnorm_c0=-5,0 # =================================== # 5G-Core0 [20MHz(l), 40MHz(l), 80Mhz(l), 20MHz(ml), 40MHz(ml), 80Mhz(ml), 20MHz(mu), 40MHz(mu), 80Mhz(mu), 20MHz(h), 40MHz(h), 80Mhz(h)] # 5170 to below 5500(ch36 to ch96) - l # 5500 to below 5620(ch100 to ch120) - ml # 5620 to below 5745(ch124 to ch144) - mu # 5745 to below 5835(ch149 to ch165) - h # =================================== rssicorrnorm5g_c0=7,0,0,6,0,0,3,0,0,4,0,0 # 6G-Core0 [20MHz(u5), 40MHz(u5), 80Mhz(u5), 20MHz(u6), 40MHz(u6), 80Mhz(u6), 20MHz(u7), 40MHz(u7), 80Mhz(u7), 20MHz(u8), 40MHz(u8), 80Mhz(u8)] rssicorrnorm6g_c0=1,0,0,-4,0,0,-2,0,0,0,0,0 # These parameter are not required (seems obsolete), valid for fast AGC #rssi_delta_5gl=-6 4 -8 -8 -6 4 -8 -8 -6 4 -8 -8 -3 6 -3 -4 -3 6 -3 -4 -3 6 -3 -4 #rssi_delta_5gml=-1 3 -1 -3 -1 3 -1 -3 -1 3 -1 -3 -1 2 0 -2 -1 2 0 -2 -1 2 0 -2 #rssi_delta_5gmu=0 3 -1 -2 0 3 -1 -2 0 3 -1 -2 0 2 0 -2 0 2 0 -2 0 2 0 -2 #rssi_delta_5gh=2 4 2 -1 2 4 2 -1 2 4 2 -1 0 0 2 -2 0 0 2 -2 0 0 2 -2 #rssi_delta_6gunii5=-6 4 -8 -8 -6 4 -8 -8 -6 4 -8 -8 -3 6 -3 -4 -3 6 -3 -4 -3 6 -3 -4 #rssi_delta_6gunii6=-1 3 -1 -3 -1 3 -1 -3 -1 3 -1 -3 -1 2 0 -2 -1 2 0 -2 -1 2 0 -2 #rssi_delta_6gunii7=0 3 -1 -2 0 3 -1 -2 0 3 -1 -2 0 2 0 -2 0 2 0 -2 0 2 0 -2 #rssi_delta_6gunii8=2 4 2 -1 2 4 2 -1 2 4 2 -1 0 0 2 -2 0 0 2 -2 0 0 2 -2 rssi_cal_rev=1 rxgaincal_rssical=1 # Correction for low rssi region low_pwr_rssi_thresh_qdBm_5g=-334 low_pwr_rssi_bias_5g_c0=-2,0,0,-8,0,0,-6,0,0,-8,0,0 # Setting this to 255 to disable temp based compensation gain_cal_temp=25 rxgain_tempcoeff2g_sub=32,32,32,32,32,32,32,32,32,32 rxgain_tempcoeff5gl=28 rxgain_tempcoeff5gml=24 rxgain_tempcoeff5gmu=24 rxgain_tempcoeff5gh=24 rxgain_tempcoeff2g_sub_elnaoff=32,32,32,32,32,32,32,32,32,32 rxgain_tempcoeff5gl_elnaoff=28 rxgain_tempcoeff5gml_elnaoff=22 rxgain_tempcoeff5gmu_elnaoff=22 rxgain_tempcoeff5gh_elnaoff=22 rxgain_tempcoeff6g_unii5=24 rxgain_tempcoeff6g_unii6=24 rxgain_tempcoeff6g_unii7=28 rxgain_tempcoeff6g_unii8=34 # Each nibble represent 2G channel from 1 to 14. LSB 3 bits specify group number (i.e. 0 to 4), MSB specify if ch used for calibration rssi_cal_freq_grp_2g= 0x08,0x01,0x91,0x2a,0x23,0xb3,0xc4 rssi_delta_2gb0=0,0,0,0 rssi_delta_2gb1=0,0,0,0 rssi_delta_2gb2=0,0,0,0 rssi_delta_2gb3=0,0,0,0 rssi_delta_2gb4=0,0,0,0 # ==== RSSI related parametes end ============================================================== #Two range TSSI tworangetssi2g=0 tworangetssi5g=0 # NOTE :================================================================================ # To run TPC with Two Range TSSI ,set tworangetssi2g = 1 and lowpowerrange2g = 0 # To run TPC with Single Range TSSI, set tworangetssi2g = 0 # To run TPC please READ instructions near pa2ga0 and pa2ga1 as well # To generate PA params for Low Range set tworangetssi2g = 0 and lowpowerrange2g to 1 # To generate PA params for High Range set tworangetssi2g = 1 and lowpowerrange2g to 1 # ====================================================================================== #lowpowerrange2g=0 #lowpowerrange5g=0 #Related to FW Download. Host may use this nocrc=1 #FIXME:4369 otpimagesize? Check with Rama otpimagesize=502 xtalfreq=37400 txchain=1 rxchain=1 cckdigfilttype=3 cck_txgain_offsetval=0x18 #bit mask for slice capability bit 0:2G bit 1:5G bandcap=2 #FDSS Related fdss_level_5g=9 fdss_interp_en=0 fdss_level_2g=4 #FIXME: fdss level for 6G made same as 5G for now fdss_level_6g=9 #LPB related : FIXME Enable later leg_preamble_boost=12,12,0 lpb_comp=10 #PAPRR Related paprdis=0 paprrmcsgain2g=130,130,130,129,128,0,0,0,0,0,0,0 paprrmcsgamma2g=550,550,550,650,700,-1,-1,-1,-1,-1,-1,-1 paprrmcsgain5g20=130,130,130,129,128,0,0,0,0,0,0,0 paprrmcsgamma5g20=500,500,550,650,700,-1,-1,-1,-1,-1,-1,-1 #PAPR params for 6G #FIXME: papr params 6G made same as 5G for now paprrmcsgain6g20=130,130,130,129,128,0,0,0,0,0,0,0 paprrmcsgamma6g20=500,500,550,650,700,-1,-1,-1,-1,-1,-1,-1 #Tempsense Related tempthresh=255 tempoffset=255 rawtempsense=0x1ff phycal_tempdelta=15 temps_period=15 temps_hysteresis=15 #------------- TSSI Related ------------- tssipos2g=1 tssipos5g=1 AvVmid_c0=6,75,5,93,5,93,5,93,5,93,5,90,5,90,5,90,5,90 low_adc_rate_en=1 #limit Tx gain index txidxcap2g=10 txidxcap5g=10 txidxcap6g=10 # Single RANGE TPC/TSSI #2G OFDM pa2ga0=-83,6939,-652 #2G CCK pa2gccka0=-70,7733,-727 #5G channels:36 to 48,52 to 64,100 to 144,149 to 165 pa5ga0=-94,7296,-678,-88,7337,-671,-135,6902,-712,-110,7005,-686 #PA Params 6G UNII-5,6,7,8 pa6ga0=-157,6232,-665,-156,6495,-703,-145,6522,-710,-162,6115,-686 # Max power and offsets maxp2ga0=86 maxp5ga0=72,72,72,72 #Max Power on 6G UNII-5/6 and UNII-7/8 maxp6ga0=64,60 subband5gver=0x4 paparambwver=3 cckpwroffset0=0 # PD offsets for 2G,5G,6G # 2G power offset per channel powoffs2gtna0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # 5G power offset per channel for band edge channel powoffs5g20mtna0=0,0,0,0,0,0,0 pdoffset20ma0=0x0000 pdoffset6g20ma0=0x0000 pdoffset6g20ma0_group1=0x0000 cckbw202gpo=0 cckbw20ul2gpo=0 mcsbw202gpo=0x88554444 dot11agofdmhrbw202gpo=0x5444 ofdmlrbw202gpo=0x0044 mcsbw205glpo=0x55111110 mcsbw205gmpo=0x55111110 mcsbw205ghpo=0x55111110 # ppr offsets for UNII-5/6 of 6GHz band mcsbw206glpo=0x33000000 # ppr offsets for UNII-7/8 of 6GHz band mcsbw206gmpo=0x44000000 mcs1024qam2gpo=0x00aa mcs1024qam5glpo=0x000077 mcs1024qam5gmpo=0x000077 mcs1024qam5ghpo=0x000077 mcs1024qam5gx1po=0x000077 mcs1024qam5gx2po=0x000077 mcs8poexp=0 mcs9poexp=0 mcs10poexp=0 mcs11poexp=0 # 1024QAM rates' offset for 6GHz UNII-5/6 mcs1024qam6glpo=0x555555 # 1024QAM rates' offset for 6GHz UNII-7/8 mcs1024qam6gmpo=0x555555 #UL-OFDMA PPR's accros RU's #currently programmed same PPR accross RU's #across QAM's the PPR are same b/w SU and RU #each RU PPR is grouped with 5 bits ruppr2g20bpska0=0x10842 ruppr2g20qpska0=0x10842 ruppr2g20qam16a0=0x10842 ruppr2g20qam64a0=0x294A5 ruppr2g20qam256a0=0x42108 ruppr2g20qam1024a0=0x5294A ruppr5g20bpska0=0x0 ruppr5g20qpska0=0x0 ruppr5g20qam16a0=0x10842 ruppr5g20qam64a0=0x10842 ruppr5g20qam256a0=0x18c63 ruppr5g20qam1024a0=0x294A5 # OLPC Related disable_olpc=0 olpc_thresh5g=60 olpc_anchor5g=64 disable_olpc_2g=0 olpc_thresh2g=56 olpc_anchor2g=60 #FIXME: olpc params 6G made same as 5G for now olpc_thresh6g=60 olpc_anchor6g=64 #LTE Coex Related ltecxmux=0 ltecxpadnum=0x0504 ltecxfnsel=0x44 ltecxgcigpio=0x04 #OOB params #device_wake_opt=1 #host_wake_opt=0 # SWCTRL Related swctrlmap_5g=0x18081808,0x12021202,0x18081808,0x000008,0x1F swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000 fem_table_init_val=0x01100110,0x00000000 fem_table_init_val_ext=0x00000000,0x00000000 swctrlmap_2g=0x16061606,0x1808180C,0x16061606,0x000008,0x11F swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000 clb2gslice0core0=0x1c clb5gslice0core0=0x1e #For TDM coex use the following btc_prisel_ant_mask=0x0 clb_swctrl_smask_ant0=0x37f # 2 Ant hyb/par following comment above #btc_prisel_ant_mask=0x3 #clb_swctrl_smask_ant0=0x34f muxenab=1 #BT Coex 1:TDM btc_mode=1 # --- PAPD Cal related params ---- # 0:NBPAPD 1:WBPAPD txwbpapden=1 # NB PAPD Cal params # 0x5Gc02Gc0 nb_eps_offset=0x01dd01e3 nb_bbmult=0x5550 nb_papdcalidx=0x050a nb_txattn=0x0000 nb_rxattn=0x0000 papdgainctrl2g=0 papdgainctrl5g=0 pacalshift2g=5 pacalshift5g=4 eps_stopidx=63 # two-core specific variables for each of UNII-5/6/7/8 bands # u5c0,u6c0,u7c0,u8c0 nb_txattn_6g=0,0,0,0 nb_rxattn_6g=0,0,0,0 nb_papdcalidx_6g=10,10,10,10 nb_bbmult_6g=80,80,80,80 nb_eps_offset_6g=475,475,475,475 papdgainctrl6g=0 pacalshift6g20=3,4,4,4 # WB papd cal params # c02g,c05g20 wb_txattn=0,1 wb_rxattn=0,0 wb_tia_gain_mode=2,2 wb_eps_offset=474,462 wb_papdcalidx=10,5 wb_bbmult=64,90 wb_calref_db=23,24 wb_txbuf_offset=33,32 wb_frac_del=255,255 wb_g_frac_bits=10,10 # WB 6G cal params # u5c0,u6c0,u7c0,u8c0 wb_txattn_6g20=1,1,1,1 wb_rxattn_6g20=0,0,0,0 wb_tia_gain_mode_6g20=4,4,2,5 wb_papdcalidx_6g20=10,10,5,30 wb_bbmult_6g20=70,80,80,86 wb_eps_offset_6g20=470,468,463,471 wb_calref_db_6g20=24,24,24,28 #2nd LUT parameters wb_multipapd_en=0 wb_PapdLutSel_idx_6g20=42,42,42,42 wb_eps_index_offset_6g20=5,5,5,5 wb_papdcalidx_6g20_lut1=10,10,10,10 wb_bbmult_6g20_lut1=66,70,74,74 wb_calref_db_6g20_lut1=26,26,26,26 # WBPAPD gain control params wb_gainctrl_nvram_en=1 wb_target_tssi_2g20=200 wb_target_tssi_5g20=210,210,210,150 wb_target_tssi_6g20=75,71,100,-45 wb_fudge_factor_2g5g=1,0,-1,-1,-1 # 2g/5G 2nd PAPD LUT parameters applicable for -40degc wb_eps_offset_lut1=22,10 wb_calref_db_lut1=23,19 wb_papdcalidx_lut1=10,10 wb_bbmult_lut1=25,40 wb_PapdLutSel_idx_2g5g=53,52 # energy detect threshold ed_thresh2g=-65 ed_thresh5g=-68 ed_thresh6g=-68 # energy detect threshold for EU eu_edthresh2g=-65 eu_edthresh5g=-68 eu_edthresh6g=-68 btldopu=0 #rpcal coef for imptxbf rpcal2g=0 rpcal5gb0=238 rpcal5gb1=228 rpcal5gb2=222 rpcal5gb3=229 #Enable LHL PS mode lhl_ps_mode=3 #SR related params #The min resource state during sleep rmin=0x1 #disable sr topoff lpflags=0 #disable fastlpo setting fastlpo_pcie_dis=0 fastlpo_dis=0 #PALDO settings 0=3.3 1=3.35 2=3.41 3=3.46 4=2.86, 5=2.97 6=3.08, 7=3.19 #paldo3p3_voltage=0 #2G lowpwr settings 0=TOT 1=setting1 2=setting2 3=settingHE(lowpwr) #ipa2glowpwr=3 #temperature throttling # Currently tvpm is not part of H1 build, disable for initial BU tvpm=1 tvpm_txc_txdc=105,15 tvpm_txc_txdc_lowlimit=1 tvpm_txc_txdc_insert=0,0 tvpm_monitor_period=3 #temperature throttling, aggressive setting tvpm_txc_txdc_burst=110,20,5 ##Dynamic Desense Params for 2 ant hybrid coex #btcdyn_flags=3 #btcdyn_dflt_dsns_level=0 #btcdyn_low_dsns_level=1 #btcdyn_mid_dsns_level=2 #btcdyn_high_dsns_level=4 #btcdyn_default_btc_mode=5 #btcdyn_dsns_rows=2 #btcdyn_dsns_row1=5,-4,0,-50,-70 #btcdyn_dsns_row0=5,12,0,-50,-65 ppr_hitemp_offset=70,10 # idx 0: PPR temp thresh, default 150 # idx 1: PPR temp thresh hysteresis, default 15 cckbw202gpo_ht=0x6666 # CCK high temp offset, 0.5dBm/step, rate(11,5.5,2,1Mbps) ofdmbw202gpo_ht=0x66666666 # 2G OFDM temp offset, 0.5dBm/step, rate(54,48,36,24,18,12,9,6Mbps) mcsbw202gpo_ht=0x66666666 # 2G BW20 VHT/HT temp offset, 0.5dBm/step, rate(C9,C8,M7,M6,M5,M4,M3,M2-0) mcsbw202gpo_1024qam_ht=0x66 # 2G BW20 HE/VHT temp offset, 0.5dBm/step, rate(C11,C10) ofdmbw205gpo_ht=0x66666666 # 5G OFDM temp offset, 0.5dBm/step, rate(54,48,36,24,18,12,9,6Mbps) mcsbw205gpo_ht=0x66666666 # 5G BW20 HE/VHT/HT temp offset, 0.5dBm/step, rate(C9,C8,M7,M6,M5,M4,M3,M2-0) mcsbw205gpo_1024qam_ht=0x66 # 5G BW20 HE/VHT temp offset, 0.5dBm/step, rate(C11,C10) ofdmbw206gpo_ht=0x66666666 # 6G OFDM temp offset, 0.5dBm/step, rate(54,48,36,24,18,12,9,6Mbps) mcsbw206gpo_ht=0x66666666 # 6G BW20 HE/VHT/HT temp offset, 0.5dBm/step, rate(C9,C8,M7,M6,M5,M4,M3,M2-0) mcsbw206gpo_1024qam_ht=0x66 # 6G BW20 HE/VHT temp offset, 0.5dBm/step, rate(C11,C10) # SWDIV related swdiv_en=1 #To enable SW-DIV feature swdiv_gpio=0 swdiv_swctrl_en=2 swdiv_swctrl_ant0=0 swdiv_swctrl_ant1=1 swdiv_antmap2g_main=1 swdiv_antmap5g_main=1 swdiv_snrlim=290 #Only enable sw_div if the snr on present antenna is less than 290/8=36.25 swdiv_thresh=2000 #No.of rxpkts threshold swdiv_snrthresh=24 #Difference between antenna's snr is greater than 24/8=3dB, then shift the antennas swdiv_timeon=10 swdiv_timeoff=1 swdiv_snr2g20=232 swdiv_snr2g40=257 swdiv_snr5g20=232 swdiv_snr5g40=312 swdiv_snr5g80=296 swdiv_ap_dead_check=0 #Enable sending of null frames at a periodicity of 1 sec to check whether the present antenna is dead swdiv_ap_div=0 #Enabling ap_diversity