From: Javier Viguera Date: Thu, 31 Aug 2023 16:33:13 +0200 Subject: [PATCH] imx9: soc.mak: capture commands output into a log file This is later used to get the needed information for the signing of the boot artifacts. Signed-off-by: Javier Viguera --- iMX9/soc.mak | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/iMX9/soc.mak b/iMX9/soc.mak index 7c4086c153d0..7ec4bb5eaeb4 100644 --- a/iMX9/soc.mak +++ b/iMX9/soc.mak @@ -1,4 +1,5 @@ MKIMG = ../mkimage_imx8 +MKIMAGE_LOG = "mkimage-$(firstword $(MAKECMDGOALS)).log" CC ?= gcc REV ?= A0 @@ -71,7 +72,7 @@ u-boot-atf-container.img: bl31.bin u-boot-hash.bin fi; \ else \ ./$(MKIMG) -soc IMX9 -c -ap bl31.bin a35 $(ATF_LOAD_ADDR) -ap u-boot-hash.bin a35 $(UBOOT_LOAD_ADDR) -out u-boot-atf-container.img; \ - fi + fi | tee $(MKIMAGE_LOG) .PHONY: clean nightly clean: @@ -80,11 +81,11 @@ clean: @echo "imx8ulp clean done" flash_singleboot: $(MKIMG) $(AHAB_IMG) u-boot-spl-ddr.bin u-boot-atf-container.img - ./$(MKIMG) -soc IMX9 -append $(AHAB_IMG) -c -ap u-boot-spl-ddr.bin a35 $(SPL_LOAD_ADDR) -out flash.bin + ./$(MKIMG) -soc IMX9 -append $(AHAB_IMG) -c -ap u-boot-spl-ddr.bin a35 $(SPL_LOAD_ADDR) -out flash.bin | tee -a $(MKIMAGE_LOG) cp flash.bin boot-spl-container.img @flashbin_size=`wc -c flash.bin | awk '{print $$1}'`; \ pad_cnt=$$(((flashbin_size + 0x400 - 1) / 0x400)); \ - echo "append u-boot-atf-container.img at $$pad_cnt KB"; \ + echo "append u-boot-atf-container.img at $$pad_cnt KB" | tee -a $(MKIMAGE_LOG); \ dd if=u-boot-atf-container.img of=flash.bin bs=1K seek=$$pad_cnt; flash_singleboot_flexspi: $(MKIMG) $(AHAB_IMG) u-boot-spl-ddr.bin u-boot-atf-container.img