910b8761f0
These have been provided by the embedded hardware team and they are to be used for certification testing. The calibration corresponds to the internal antenna on the module. If using the current external antenna on the CC6UL SBC they work fine, although they could be tweaked to improve. The BDF files provided were generated from the original ones, by running a test tree for output power calibration for QCA6564A-3 chip. This test tree is called ‘FCCSP_Rome3.x_WLAN_CLPC_cal_and_WLAN_BT_Verify_Y8611-H341.xtt’ and it belongs to the Qualcomm Design Package ‘DP25-WL420-100’. The test tree is to be run in the QSPR software tool, part of the QDART software tools set provided by Qualcomm. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> |
||
|---|---|---|
| .. | ||
| alsa-state | ||
| firmware-atheros | ||
| firmware-qualcomm | ||
| formfactor | ||
| kobs-ng | ||
| libdigi | ||
| nvram | ||
| trustfence-cst | ||
| u-boot | ||
| ubootenv | ||
| update-flash | ||